Question about 2002 Triumph TT 600

1 Answer

Headlight full or low beam dont work. I have checked the switch which all seems in working order the bulb is fine but i cant work it out! all the fuses are fine. Unfortunately i cant afford to take it to a dealer so i have to work it out, its probably something really simple. does anyone have any ideas? or does anyone know what colour wires are positive etc...... cheers John

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 115 Answers

Where doyou think the electrical source is came from..,in the batery or dynamo/?IF YOU THINK in the dynamo,then you check the coil or magnetic wire if it is burned.

Posted on Nov 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

'74 CB200 headlight not working.


i would change the headlight because if one side of the bulb lights up that means that the lower beam is bad or just check your fuse you may have two fuses to that connection

May 30, 2012 | 1974 Honda CB 200

1 Answer

2004 envoy xuv low beams dont work switched fuses 45 and 46 still nothing any ideas


Other possibilities are; the bulbs themselves, burnt or corroded bulb sockets, or a bad headlight selector switch.

Dec 11, 2011 | 2004 GMC Envoy

1 Answer

2006 GMC Envoy low beam headlights dont work. All fuses, and bulb filements, are fine.


Hello, try to start by checking the headlight relay and headlight fuse. You also may want to check to make sure the bulbs aren't blown out. If those parts check out to be fine and in working order, you may need to replace the turn signal assembly in the steering column. This part controls the hi/low beams. This may sound crazy but, when GM wired their older trucks, they wired the headlights to go from the battery, to the hi/low beam switch, then to the headlight switch (to the left of the steering wheel) then out to the light bulbs. You can kind of test to see if this part is good by making a fist and (with your headlights on) gently hitting the plastic cover for your steering column that is right behind your actual steering wheel. This could cause your headlights to flicker on and off.

Thanks

Aug 09, 2010 | 2004 GMC Envoy

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

1 Answer

Low beam dosent work. bulb is good highbeam works cant find fuse for lights. its not underhood


Hi,
It has been because the lamp bulb or halogen lamp module has reached the end of its serviceable life, not because of any wiring problems. Low beam burns out first because it is on the most. If low beam is lost simultaneously in both headlights, I would check fuse first, then the headlight switch. If low beam is lost on one side only, it is almost always going to be due to the bulb or lamp module needing to be replaced. In that case, replace them in both headlights because the other one will be going kaput in short order, as well.
Most like the low beam filiment is bad but the high beam filiment is still good, try replacing bulb. If replacing bulb does not fix problem then you probably have voltage problems and should check the voltage reading and the plug.
OR
isolate the wire that comes from the headlight switch to the headlamp bulbs for low beam and check to see if there is a short in the wire. You can find this wire by using a test light turn on the key and get a good ground with the test light poke the wire and see if the test light illunimates with the headlight switch on.
check the wires, and check the fuse for your lowbeams. could of blown a fuse on your lows, but your highs will still work.

The fuse box is located in the engine compartment,on the driver's side. Has thumb-screw retained cover.
Thanks for contacting fixya.com

Nov 07, 2009 | Dodge Ram 1500 Cars & Trucks

2 Answers

Low beams dont work, only high beams do. 02 tacoma


If there is power there, then it has to be the bulbs. The trouble that most people have is, they don't see how both bulbs could burn out at once... and they're right. They don't. But you see vehicles with one headlight all the time. They don't know it unless you tell them or they happen to see it themselves. Then the second light burns out, and they think it's a major catastrophe, when in fact, it's just bulbs. The high beam still works because the bulb is double filament. The only other thing it can be is the dimmer switch, and since you switched it to high, it appears to be working. However, if it's not bulbs, it still could be the switch.

Oct 07, 2009 | 1996 Toyota Tacoma

2 Answers

Low beam headlight not working


Headlight's are not fused, there is a circuit breaker built into the headlight switch, pull the head light switch out and look for a burnt discolored connector and discolored terminals on the switch, if u find either or both replace the headlight switch and the connector, headlight switch connectors are avail in the aftermarket through full service parts stores like NAPA, also on the internet under automotive electrical repair connectors, if the headlight switch checks ok and has power in to it and out to low beams then replace the multifunction switch opn the steering column.

Nov 14, 2008 | 1993 Chevrolet K1500

Not finding what you are looking for?
2002 Triumph TT 600 Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...