Question about 2000 Aprilia RS 125
There are 3 pipe outlets on a carb for a aprillia rs 125 for the 2 stroke, why is this and which nozzle connects where on the bike.
This website can help you www.rsgoldfast.com
They serve good high efficiency, safe and convenient transaction, you can go to experience
The price is certainly the cheapest
There is also often very affordable activity
Posted on Jan 05, 2017
Hi, Andyoupe2006 for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Two Stroke Scooter ATV Carburetor Settings And Adjustments 1of4 Basics...
DOWNLOAD 2007 Aprilia Rs 125
Posted on Oct 29, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can download the service manual for nix from here. trying to picture what you are looking at, but if they are the only rubber hoses coming off the carby, then they are most probably the fuel lines. If they come off the very top of the carby, then they may be breathers. The bike has a vacuum operated petcock also, you will need to have it in prime position for the carbs to fill. Then once the engine runs, if the petcock os working correctly, then you should be able to get fuel in on position. Just cranking it over will not created enough vacuum for the carbies to fill.,hence the prime setting. Happy to answer any questions you may have about the bike, A FixYa rating is a great reward for my efforts to assist you. Cheers
Posted on Nov 13, 2008
SOURCE: engine sound and oil leak
crank main bearing sounds like its gone and oil seal gone i had same problem needs imidiate rebuild before more damage ocures looking at an expensive job
Posted on Jan 20, 2009
SOURCE: carb settings
Its simple , just remove the air filter clean it and check the spark plug and reset it to its right specs the gap.
Locate the air-mixture screw on the carb and warmup thebike's engine.
Turn the air-mixture screw in tothe last , but very slowly as to not damage it as its very sharp at the end of it, at this point increase the idling a little thn turn the air-mixture screw outwards 1 and a half turns and you will notice the difference in the engine , it may rev a little higher and be stable , here you will have to reduce the idling speed and again try to readjust the air-mixture screw outwards a little or inwards alittle depends how the engine responds.
Hope this will help!
Knight.(Yamaha Seca XJ750A 1981)
Posted on Mar 01, 2009
Turn both screws inward and seat them GENTLY. Now turn both screws one and one half turns outward. This is the factory setting.
Please rate this solution as a "FixYa" Thanks!
Posted on Mar 19, 2009
Some of the photos may be for 2009.
Most of the photos are right-hand side. All racetracks are left-hand turn oriented so everyone use that as an advertising base.
Unfortunately the 360 degree rotation icon is not working.
Posted on Apr 03, 2009
Tips for a great answer:
Jun 19, 2013 | 1999 Aprilia RS 125 Extrema
Feb 16, 2013 | 2001 Aprilia RS 125
Jul 29, 2012 | 2011 Aprilia RS 125
Feb 28, 2011 | 2008 Aprilia RS 125 GP
Nov 19, 2010 | 1998 Aprilia RS 125 Extrema
Oct 16, 2010 | 2003 kawasaki KX 125
Aug 17, 2010 | 2000 Aprilia RS 125
Apr 07, 2009 | 2002 Aprilia RS 125
Nov 10, 2008 | 1998 Aprilia RS 125 Extrema
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: