Question about 2006 Honda CBR 125 R

1 Answer

How do I change main headlight bulb - 2006 Honda CBR 125 R

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

To change the bulb you need to remove the four star screws holding the plastic covers either side of the clocks (One each side at the top of the screen and one each side straight down into the nose fairing). Next remove the two 10mm bolts holding the clocks. Raise the clocks a few inches until you can unscrew the speedo cable and then move the clocks to one side. Pull back the rubber boot on the headlight and feel for a spring loaded catch. the bulb and holder should now come out with a little bit of fiddling and jiggling.

Posted on Nov 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What tool is needed to replace a headlight bulb in a Kia Amanti


Some cars are a complete b r t d to change headlight bulbs. You may need to remove the headlight unit, to do this may require the removal of the bumper. Ask a main dealer for a quote, then winge, they may explain why the cost is so high.

Jul 05, 2016 | Kia Amanti Cars & Trucks

1 Answer

High beams work low does not help please


what car is it? your main beams gone, put your headlights on put on high beam take a look at headlights take note where lights emit from then change back to main beam then check headlights again note which arent emitting light those are the bulbs you need to replace hope this helps

Mar 13, 2015 | Cars & Trucks

1 Answer

How do i change the driver side headlight bulb on a 2000 Lexus ES300


  • Open the hood of the ES300 and prop it open.

  • 2

    Look at the headlight assembly from the top down. Depending on your model year, there may be a plastic panel covering the top of the headlight assembly. If this is present, remove it by lifting all of the plastic clips around the edges and lifting it off.

  • Sponsored Links

  • 3

    Locate the three bolts that hold the headlight assembly in place. Two of the bolts are in the left and right rear corners of the assembly, and the third is on the side bordering the outside edge of the car, screwed into the back of the fender panel. Remove all of these bolts with a small adjustable wrench. Though they appear to be designed to be removed with a screwdriver, the way they're arranged makes it almost impossible to remove them with one.

  • 4

    Slide the entire headlight assembly forward a few inches so that you can reach the back of it.

  • 5

    Unscrew the plastic bulb socket assembly. This is the large, round component located right in the middle of the back of the main assembly. Turn it about a quarter turn to the left and you can pull it away from the main assembly. If you're replacing both the bulb and the main assembly, see the next section on how to replace the bulb, then resume this process



  • Read more: How to Change Headlights in a Lexus Es300 ' eHow.com http://www.ehow.com/how_5038522_change-headlights-lexus-es.html#ixzz1x1Ywyhkr

    Jun 05, 2012 | 2000 Lexus ES 300

    1 Answer

    Where is dipped bulb


    in your headlight you have side light a dipped light and a main beam normally the one bulb has your dipped light and your main beam sometimes the dipped light can go and you need to change the bulb ,even though the main beam maybe ookay

    Sep 18, 2011 | 2006 Porsche Cayenne

    1 Answer

    How do you remove the headlight bulb


    1. Remove headlight unit
    2. Disconnect headlight leads
    3. Remove bulb cover
    4. Remove headlight bulb holder
    5. Remove headlight bulb
    6. Install new headlight bulb - DO NOT TOUCH THE GLASS PART OF THE BULB!
    7. Install headlight bulb holder
    8. Install bulb cover
    9. Connect headlight leads
    10. Install headlight unit

    I'm not aware of any shortcuts, nor do I believe that any steps could be changed or eliminated without re-engineering the headlight unit.

    Jun 06, 2010 | 2008 Yamaha Royal Star Venture

    1 Answer

    No low beam only high beam


    check the ground connection of the bulbs. check the light switch. the headlight relay is located under the dash or under the hood.

    Nov 25, 2009 | 1994 Mazda 323

    1 Answer

    How to change right headlight on 2006 chry. sebring


    It's very tight under the hood with these cars, you just have to unscrew the two (or three) long bolts holding the entire headlamp enclosure in, pull the headlamp enclosure out and rotate the bulb to remove it. Some sebrings have a cylindrical plastic guard around the main bulb, that just screws off as well. You might have to adjust your headlights after you change them.

    Apr 18, 2009 | 2001 Chrysler Sebring

    4 Answers

    How do I change the headlight bulb on a 2003 Mazda6


    Just went to my local store - they sell the bulbs and fit them while you wait...the guy does a lot of them - he had it done in 10 minutes and charged 12 pounds including the bulb. I watched him do it - twisted the cover off - popped the bulb out and popped the new one in ...he didn't actually unbolt anything from the car...worst of all it was dark and raining...I'd suggest this route unless you have small hands or are willing to spend an hour fiddling around

    Nov 06, 2008 | 2003 Mazda Mazda6

    Not finding what you are looking for?
    2006 Honda CBR 125 R Logo

    1,635 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4535 Answers

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    bazzz7071
    bazzz7071

    Level 2 Expert

    342 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...