Question about 2003 Yamaha YZ 125

2 Answers

My 250 Virago will only run on tickover as soon as I open the thotle it cuts out and stop it has not been used for a while is there a jet blocked John Skipper

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

Change The spark plug FIRST!!!! BR8EG it runs hotter, my bike bogged down and died and wouldnt start until i changed the plug

Posted on Nov 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Clean the carbeurator and possible the reed valves (if its a 2-stroke), had same problem with my yz125

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not get an even tickover


Hi, Anonymous and the usual suspects are:
1. Idle speed improperly adjusted.
2. Air fuel mixture screws not properly adjusted.
3. Inlet system air leak.
4. Leaking accelerator pump.
5. Loose low-speed jet.
6. Plugged low-speed jet.
7. Contaminated or plugged low-speed circuit.
8. Enrichner valve/choke not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://viragohelp.com/virago-hitachi-carburetors
http://viragohelp.com/virago-carburetor-cv
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-16_110.pdf

Jul 03, 2014 | 1998 Yamaha XV 535 Virago DX

1 Answer

Engine cuts out when slowing down


Start off by cleaning carbs,sounds like idle jets are blocked

Feb 27, 2014 | Boating

1 Answer

I have a2004 yamaha virago 250 it wont start on 1st gear but it will start on nuetral but it idles really low and after a wile it shuts of. help?


Hi, Duce420666 and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on blue links below. Good luck and have a wonderful day.
Virago XV250 Choke and Idle Problem Premium fuel
Yamaha Virago 250 Idle Stall Issue
Yamaha XV250G Supplementary Service Manual
OEM parts for Yamaha
Yamaha VIRAGO XV250P Owner Manual

Apr 22, 2012 | Yamaha Virago 250 Motorcycles

1 Answer

1994Yamaha Virago 535 Starts and runs but it cuts off when I turn the choke off.


There is possibly some dirt blocking the main jet supply or the float level has somehow dropped and the engine needs the extra suction to draw enough fuel in to keep running and it is supplementing this extra supply through the idle jets.

Mar 05, 2011 | 1994 Yamaha XV 535 Virago DX

1 Answer

I have a 2004 yamaha 250 virago. That will not run with choke off.


Take the carburetor apart and clean it . Make sure the slow jet is clear. Be sure to shoot cleaner through the carburetor body so all the pathways are clear.

Sep 07, 2010 | 2004 Yamaha Xv 250 Virago S

2 Answers

1995 Yamaha XV 250 Virago Is there a need to adjust the choke (start) cable? If so, how is it adjusted. I think I'm having a problem with my choke and was planning to replace the cable and starter...


The problems with a plunger style choke happen when the rubber on the bottom becomes deformed and does not seal or the spring does not push the plunger down hard enough, or the cap breaks so the plunger is not pushed down hard enough. If you put your finger over the hole and the bike runs properly your bike is running on choke. You have to block the hole deep inside the carb to shut off the choke. I assume the original problem was that the bike would not idle .If this is the case, take the carb apart remove the slow jet and clean the jet and the carb body out so fuel will flow at idle. This should fix your no idle problem.

Jun 26, 2010 | 2002 Yamaha Xv 250 Virago S

1 Answer

I have a 2002 yamaha virago 250 that has set for awhile and I am pretty sure the jet is clogged how do I do this and how easy is it.


YOU MUST REMOVE THE CARB FROM THE BIKE. YOU THEN TAKE THE BOWL OFF THE BOTTOM OF THE CARB TO ACCESS THE JETS. REMOVE THE JETS AND INSPECT. CLEAN IF NEEDED AND REINSTALL IN REVERSE ORDER.

Oct 21, 2009 | 2002 Yamaha Xv 250 Virago S

1 Answer

Peugeot jet force 50 engine cuts out on overrun


when the engine dies pull out the spark plug and earth the plug on the metal part and turn it over dont hold the spark plug as you will get a shock if the plug sparks you know the ignition system is working.if you have no spark do a compresion test to see if there is a problem with the engine.if that ok you will have a fuel problem make sure the breather on the fuel tank isn blocked or trapped.

Oct 08, 2009 | 1976 Honda CB 100

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...