Question about Honda Xr 250 Motorcycles

1 Answer

Have an 1995 xr250r and it won't start. when its cold only push starts, when its hot only starts some times or if its pushed. Thanks any surgestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 301 Answers

Low compression can cause this. Insufficient valve tappet clearance is the most common cause of low compression on this engine. So, check the compression and, if it is lower that about 130 psi, have the valves adjusted.
Also make sure the kick starter actuated compression release isn't sticking after the kick starter is operated.
Another thing that can cause it to be difficult to start is a plugged up carburetor. If the bike has ever sat for more than about a year, then the carburetor needs to be disassembled and cleaned out.

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold engine cranks when bumpping the starter once. After engine is wram you have to bump starter three time to crank. 1997 jeep wrangler 4.0 engine. What is the problem. Thanks


Its a hot start issue.

Can be related to low fuel pressure or problem with crank sensor.


Also it can be weak battery or starter.


But possibilities are to be inspected to confirm what exactly it is.------


To troubleshoot and confirm the issue,i suggest you refer few solved help links with similar types of problem like yours:------


Click the link below:------


1991 Toyota Trecel: Engine Starts fine but dies when gets Warm?

http://whatisbyme.blogspot.in/2012/05/1991-toyota-trecel-engine-starts-fine.html

-------------

1994 Toyota Pickup: Starts fine but dies in few seconds?


http://howtobyme.blogspot.in/2012/05/1994-toyota-pickup-starts-fine-but-dies.html

------------

1995 Lexus LS400: Running Hot?

http://whatisbyme.blogspot.in/2012/05/1995-lexus-ls400-running-hot.html

------------

2002 Toyota Camry: Puff of Blue or White Smoke while Starting?

http://whatisbyme.blogspot.in/2012/05/2002-toyota-camry-puff-of-blue-or-white.html

------------

Multiple problems on car: Car runs hot, A/C blows hot and car starts surging?

http://schematicsdiagram.blogspot.in/2012/04/multiple-problems-on-car-car-runs-hotac.html

--------------

Delay starting on Toyota Prius?


http://schematicsdiagram.blogspot.in/2012/02/delay-starting-on-toyota-prius.html

-----------

Honda car will not start intermittently?

http://technoanswers.blogspot.in/2012/02/honda-car-will-not-start-intermittently.html

--------------

Vehicle Starts, Runs and Loses Power

http://whoisbyme.blogspot.in/2012/07/vehicle-startsruns-and-loses-power.html

--------------

Intermittent starting issues on Volvo 760?

http://schematicsdiagram.blogspot.in/2012/02/intermittent-starting-issues-on-volvo.html

-----------

Car starts and cuts off immediately?

http://repairhelpcenter.blogspot.com/2012/01/car-starts-and-cuts-off-immediately.html

-----------

Car won't start when cold?

http://schematicsdiagram.blogspot.com/2011/12/car-wont-start-when-cold.html

===========

These details will help.

Thanks.

Dec 17, 2012 | Jeep Cherokee Cars & Trucks

1 Answer

Help with xr250l that won't start well.


Hi, John and the usual suspects are:
1. Enrichner system plugged, not properly functioning or improperly operated.
2. Fuel overflow line pinched or clogged.
3. Restricted fuel supply.
4. Gas cap and or fuel tank not venting properly.
5. Plugged slow jet or passages.
6. Inlet system air leak.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Xr hard start solved Heres the fix
How to kick start cold XR250
Honda XR250R Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda XR250R Owner Manual

Jun 25, 2012 | 1998 Honda XR 250 R

1 Answer

Xr250 1995 kick start wont return


Hi, Grant for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Replaced Clutch 1992 TRX250x now Kickstart won return to the home position
Kick starter shaft 1984 honda xr250r part 1
Honda XR250R Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda XR250R Owner Manual

Nov 15, 2011 | 1995 Honda XR 250 R

1 Answer

When my buick century 1995 is cold it will start but won't rev up. once it is hot it runs okay


Number of possibilities. See if you have any diagnostic codes stored. Could be throttle position sensor, coolant temp. sensor, hard to say. I would start with the codes. Does it start easy when warmed up, and run good? Boy, I just don't know.

Oct 30, 2011 | 1995 Buick Century

2 Answers

1997 Honda XR 250 R hard to start cold


if it runs then the plug is not the problem
what is the problem is the carby
check that the choke is operational;, the float level is at the right level, and the ignition timing is correct

Jun 23, 2017 | 1997 Honda XR 250 R

1 Answer

1987 Honda XR 250 R will not stay running after it warms up


Hi, Rrheston your bike starts great when cold but once it reaches operating temperature and the engine is shut off for a few minutes then you try to restart it and it will turn over but will not fire or it doesn't do anything, the usual suspects are:
1. When electronics get hot they build up resistance then stop working. It might be an ignition coil, stator, CDI unit etc. First, you must find out if the spark dies out. When the bike won't start, pull a plug wire off, stick a new spark plug in the end and ground the threads on bare metal while someone cranks the engine over. You should see a nice big blue spark between the spark plug gap. Incorrect spark plug gap will cause or contribute to a no start when hot issue.
2. Fuel Tuners have been known to cause this type of problem, disconnect it and see if resolves the issue.
3. Any engine management sensor could be faulty especially the ones that monitor temperature.
4. Gas cap not venting properly, improperly routed fuel lines they must always go down from the gas tank to the carburetor never in any kind of a loop this will cause a vapor lock. Clogged, bent, kinked, pinched or restricted carburetor vent lines will do the same.
5. Overhead camshaft valves adjusted too tight when cold, this will cause loss of compression when hot, except for pushrod engines they usually get looser when hot.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.dirtbikeworld.net/forum/archive/index.php/t-47071.html
XR250R wont start PLEASE HELP
Honda XR250R Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda XR250R Owner Manual

May 08, 2010 | 1987 Honda XR 250 R

2 Answers

Fisher and paykel smart drive top loader , Wont fill properly .


Well where to start .....
This brand has a hell of a lot of quirks.
The first thing to try is this : With the power on at the wall and the machine off ,push and hold down the start button , then push and hold down the power button you may hear up to 3 beeps at this time (hold down the buttons for 5 seconds then release) turn machine off and turn it back on and just push start button.
What this does is re programes the computer ,then just leave machine to run cycle

Jun 12, 2009 | Fisher and Paykel Washing Machines

1 Answer

"e 10" error code


E10 usually means hot and cold water lines are reversed or your cold water supply is lacking ie: low pressure, clogged etc. Hope this helps

Aug 28, 2007 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...