Question about 1989 BMW K 100 LT

1 Answer

Wont start no noise when trying to start did I blow a fuse or something

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

It could be a number of things stoping it starting, like any one of 3 safty switches ,,the starter relay or the starter cluch its self, or some thing simpel like a fuse, start at the fuse box,,, then the starter relay, if there is power to this its a switch or the starter

Posted on Nov 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My charger Wont start. Has new battery. Everything else seems fine. Changed the #9 and 22 fuse. Still wont start


Fuses don't make a burning smell when they blow. Yours is far more serious, something has shorted out and irreparably damaged an electrical component or part of the wiring harness. You need a mechanic, preferably at a dealership who have the diagnostic equipment and vehicle history to know where to look.

May 27, 2016 | 2009 Dodge Charger

1 Answer

Dropped bike now it wont start +


check your wiring maybe a wire is cut and is shorting out cuasing the fuse to keep blowing out.

Feb 01, 2014 | 2012 Triumph Daytona 675

1 Answer

Starter fuse keeps blowing


hi,i would say the solenoid on your starter is faulty

Mar 20, 2013 | 2000 Ford Crown Victoria

1 Answer

My 1996 chevy barretta the fuel pump wont kick on how do i check to see if the pumps bad or if its something else it was running just fine last nite when i parked it and i went to start it this morning and...


A fuse will blow for 2 reasons . 1) If the device has a Short in the circuit that runs through this fuse. 2) If the device draws more amperage from the power source through the fuse than the fuse will handle. ex. if a fuel pump or starter has a 20 amp fuse and the starter/fuel pump is going bad and draws 30 amps it will blow the fuse. A fuel pump on a 1996 vehicle is located in the fuel tank and is kept cool by the surrounding gas and the gas that flows through it. Overheating a fuel pump is virtually impossible. That being said there is a High probability that replacing the fuel pump and relay will fix this problem. It is quite common for this to occur in the GM vehicle of 1996. When the pump starts to fail, it draws an excessive amount of amperage and would blow the fuse. Hope you find this information useful.

Jun 02, 2011 | 1996 Chevrolet Beretta

1 Answer

My sony receiver tuner wont turn on. It was working fine yesterday now it wont power up. The fuse near the plug wire inside is good. Any suggestions


Fuses almost never go bad something causes them to blow. Even when a blown fuse is found in electronics just t replacing it can cause more damage if something caused it to blow, a repair person looks for bad parts before replacing a fuse. Only microwaves are known to blow fuses and replacing the fuse fixes it. About the only thing that people can do is unplug a short time and try it again. And need i say is the power outlet ok.

Nov 03, 2009 | Audio Players & Recorders

1 Answer

Deyer wont start hear nothing but a hummm noise


If a dryer is not working at all that's not good! But it doesn't mean you need to go appliance shopping just yet. It may be something very simple like a bad door switch or even a broken door switch actuator, in a kenmore dryer there is a tab thats sticks out of a hole in the wall that allows the dryer to run only if the door is shut, other models may have button that protrudes out of the dryer and when the door is shut, this allows the dryer to run. These switches go out from time to time, also if a dryer is full of lint build-up over time this will cause the dryer high limit or fuse to blow. The fuse is located near where the blower is in most cases. When the air in the dryer gets way too hot the fuse/hi-limit will blow and the house wont burn down. If all of this fails then yes its the motor

Sep 21, 2009 | Kenmore 62602 Electric Dryer

2 Answers

Dash vents will not blow air


It may be the mode actuator. Have you heard any clicking or other strange noise ? Under the drivers rear seat, in a plastic box is a fuse panel. Remove the two retainers, and the cover. Remove the HVAC or A/C fuse for a minute or two. Reinstall the fuse and this will make the A/C system relearn. Whwn you put the fuses back do not touch the A/C controls. Start the truck and leave it run for two or three minutes. Then try to change the vent from floor to vent and defrost. If this does not work you will need a mode motor. Good Luck

May 22, 2009 | 2006 GMC Envoy

2 Answers

My ignition fuse keeping blowing


You have a wire rubbing on something metal. Look at the wiring harness in the car and engine compartment. Try moving them around a bit and see if you can get the fuse to blow or not to blow.

Jul 19, 2008 | 1999 Pontiac Sunfire

Not finding what you are looking for?
1989 BMW K 100 LT Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

phil cuzins
phil cuzins

Level 2 Expert

79 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...