Question about 2000 Yamaha YZF-R6

1 Answer

R6 2005 gauge cluster problem

My 2005 yamaha r6 speedometer ,tachometer ,water temp ,engine check ,shift light doesn't work but the neutral indicator , hi beam and signal indicator are ok. already check wiring connection ok

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 45,516 Answers

Hi, Genggarage for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Main instrument cluster NOT working
Gauge cluster went out just backlight working
Yamaha YZF R6T Supplementary Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Sep 28, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 132 Answers

SOURCE: YZF-R6 problem with headlights

this is normal for an r6. the lights are set up as endurance lights from the factory

Posted on Jun 13, 2009

  • 1 Answer

SOURCE: My Head lights on my YAMAHA R1 don't work at any time please help

2005 R1 no head lights or gauge lights. Other than that, everything working

Posted on Jun 24, 2009

  • 921 Answers

SOURCE: my speedometer on my 2000 yamaha r6 doesnt work

broken cable if your style bike has that style system, the cable that attaches to the axle shired off, i"ve had that stripped out also before and had to replace it.

Posted on Oct 05, 2009

  • 248 Answers

SOURCE: Looking for a wiring diagram for a Yamaha BWS 50

The service manual has a diagram, but you need to zoom in to read the colors.
You can download a free one at
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
Good luck!

Posted on Nov 21, 2009

  • 76 Answers

SOURCE: I have a 2003 yamaha kodiak ATV, reverese indicator light stays

MAKE SURE THAT FORWARD AND REVERSE ARE FULLY ENGAGEING AND DISENGAGING

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instrument cluster does not work.


Best practice is to leave pinpoint testing of the instrument cluster & (Delicate) P/C board to an expert .....

May 28, 2015 | 2001 Acura MDX

1 Answer

Instrument cluster gauges


Check engine light ,abs , air bag lights etc.... come on when key turned on ?
Fuse IPC/HVAC BATT 10 amp located in the left IP junction block . Do you know where this junction box is ?
Does the heater an A/C work ? If so the fuse isn't the problem .
Speedometer
The speedometer is a road indicator. The vehicle speed sensor (VSS) is a permanent magnet generator which is located on the transaxle. The VSS sends an input to the PCM whenever the transaxle differential carrier turns. The PCM then buffers the VSS signal. The PCM transmits the VSS signal to the following components at 4000 pulses/mile through CKT 817:
• The instrument cluster
• The cruise control module
• The radio (uplevel)
The instrument cluster uses the input in order to indicate the vehicle speed on the speedometer.
Instrument Cluster Indicators
The BCM controls the instrument cluster indicators through the SPI serial data communication bus. Refer to Body Control Module System Check in Body Control System.

IPC/BFC ACC
10A
Instrument Cluster and Body Control Module (BCM)
IPC/HVAC BATT
10A
Instrument Cluster and Heater A/C Control Assembly

Jul 24, 2017 | 1998 Oldsmobile Cutlass

1 Answer

Where is instrument cluster located on a 88 toyota corolla. fuel and temp gauges not working


The cluster is the gauges, the speedometer, tachometer , and the warning l;ights. It all is removed as a single package, why it's called a cluster.

Dec 12, 2012 | 1988 Toyota Corolla 4 Door

1 Answer

Tranmission and instrument cluster


The speed sensor on your trans sends a signal to the electronics telling it when to shift, this will be where you fault is.

Mar 05, 2012 | 2001 GMC Yukon XL

1 Answer

Tac dont work. tranmissionwant shift unless you let off of gas


The connector on the back of the gauge cluster isn't making a good connection. If the speed senser is bad the speedometer won't work either or the fuse the speedometer won't work but if the speedometer does work the trans controller or the shift switch ( park neuurtal drive ) could bemaking abad connection or be full of tans fluild or water (frozen?) The tach not working may indicate a fuse or connection problem to the cluster ( speedometer gauge unit and the computer doesn't know how fast the motor is going) The check engine light should be on in this case and checking for codes and following the repair recomedations for them should find the problem

Feb 18, 2010 | 1995 Nissan Pathfinder

1 Answer

97 318i Instrument Cluster


these dashboards are a a pain! there are fuses in the fusebo under the bonnet, check them firt, also remove them and put them back to see if it resets it, if not then there is a test you can do,,,,,

press the mileage button on the dash, turn the ignition key to position one release the button and the das should perform a complete check, i.e gauges and mileage pixel.

Good luck Davelee, p.s, please rate me.

Mar 24, 2009 | 1996 BMW 318

1 Answer

Electrical ?


probally need to check engine groundwires. clean all terminals. battery may have loose terminal.

Jan 14, 2009 | 1999 GMC Sierra

1 Answer

Speedometer/ Fuel Gauge & Tachometer not working


check for loose connection at the instrument cluster.

Jun 28, 2008 | 2001 Volkswagen Beetle

Not finding what you are looking for?
2000 Yamaha YZF-R6 Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

vince

Level 3 Expert

911 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...