Question about 2002 Suzuki GSX 600 F (Katana)

1 Answer

#1 and #4 coil not is a 2002 600 katana

#1 and #4 coil not firing,changed the coil still no fire

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

Check pulse coil generator system...i had a similar problem and found out that one of the two pickups was burnt. mine was on the left side of the bike under side case cover but i just followed the wire harness up till i got to the first disconnect and ohmd out the four wires looking for 400-450 ohms...well i only got 136ohms on one and the other was completely open. Also make sure your getting 12v to the coil... turn key on and just probe the little wires on the coil till you find it. then you'll know that its not a broken wire at least. Can i get some feed back, Thanks!

Posted on Apr 21, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1997 saturn sl standard turns over no fire changed coil packs still no fire what next

Did you check for B+ volt an ground at ignition module before replacing the coil's ? Videos on youtube showing how to test GM ignition systems

Oct 08, 2016 | 1997 Saturn SL

1 Answer

Hi, I have a 1982 gsx 1100 Suzuki sitting on the bike from left to right what is the firing order if left coil is 1-3 & right coil is 2-4? thanks

Hi, Nigel "Fast Cat" says all the inline fours are the same in this (that I know of, maybe BMW does it differently, but every Japanese inline-four I ever saw was the same) sitting on the bike, from left to right, the cylinders are 1-4... there are two coils, and the one coil fires cyls 1 and 4 and the other fires cyls 2 and 3. you can swap 1 and 4 or 2 and 3, it makes no difference at all, but you can't put the 2-3 coil on cyls 1 or 4 and vice versa... you should be able to just take the long spark plug wires and put them on cyls 1 and 4 and the shortys go to cyls 2 and 3. Firing order is 1-4-2-3 For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day. Suzuki gs katana specifications
OEM parts for Suzuki

May 06, 2016 | Suzuki Motorcycles

1 Answer

1992 gsx750f rev counter showing double of what ot should

Hi Dick, this scenario is usually caused by a mis-wiried ignition coil, changing from a single fire coil to a dual fire or vice versa.
For more information about your question please visit the website below. Good luck and have a nice day.
Suzuki Katana GSX600F GSX750F Service Manual Cyclepedia

Sep 06, 2015 | Suzuki GSX 750 F (Katana Motorcycles

1 Answer

Number 1 &4 cylinders won't fire changed the coil, plugs and wires but still won't fire.

check power and ground and signal voltage at the coil electrical plug. chances are your missing one of them.

Sep 14, 2014 | Cars & Trucks

2 Answers

I have a 97 suburban i changed timing chain and the truck is not getting any fire to the coil i put a distributer a n pickup coil a new coi and new crankshaft senser and the truck still has no fire at

Do you have battery power at the coil when the key switch is on and when the engine is cranking ?
The rotor on the distributor is turning, right ?

Aug 30, 2014 | 1997 GMC Suburban

2 Answers

#1 and #4 are not firing I changed the coil pack and still no change any ideas

You said you changed the coil pack and the wires but didn't mention the plugs. Try moving one of the plugs to a different cylinder and see if the miss follows it. It could also be the ignition module. (the thing the coil packs mount to.)

Oct 05, 2012 | 1993 Chevrolet Lumina

1 Answer

What is firing order for 97 Katina 600

one coil is for cylnders 1\4 the other coil for 2/3, the leads are usually marked

Jul 04, 2011 | 1997 Suzuki GSX 600 F (Katana)

1 Answer

Dude i need both cylinders to fire only one is firing

check power to non firing coil and fire out of coil. spark plug can affect miss fire too. Try swaping coils from 1 cyl to the other and see if problem changes cyl or stays the same.

Jan 10, 2011 | 1972 Honda CB 350 F0

1 Answer

I have a 1988 1100 katana #1 and 4 is not firing what is it ?

Your coils should be running 1 and 4 and 2 and 3, so the 1 and 4 is shot. Look on ebay for a pair, or borrow one to see if that is the problem Should be it.They go bad. Hope this helps.

Aug 01, 2010 | 1988 Suzuki GSX 1100 F (Katana)

1 Answer

I need a coil in #cylender but need to the fireing

If you are triing to find the bad coil simply run the truck and unplug each coil wire connection from each coil one at a time and change the one that dosn't change the way the engine is running.If you have coil over plug type ignition the firing order is controled by the computor and as long as you plug the coils in correctly no firing order is needed.

May 09, 2010 | 2002 Dodge Ram 3500 Truck

Not finding what you are looking for?
2002 Suzuki GSX 600 F (Katana) Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75051 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides