Question about 2000 Harley Davidson FLSTC Heritage Softail Classic

1 Answer

1993 Heritage Softail Classic motorcycle. Front

1993 Heritage Softail Classic motorcycle. Front and rear Turn signals light up but do not blink. Yet, same front and rear lights do blink in hazzard function mode. Do I need to change turn signal microprocessor module or do I need load equalizer or something eles?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

First, I'd try replacing the bulbs in both the front and rear turn signals. See what happens, that's pretty inexpensive to try.

The turn signals are controlled by the turn signal cancelling unit. You didn't mention if the problem was on just one side or if it was on both sides of the bike. I'd try to find someone that had a known good unit that would allow me to try it. The reason, they're expensive. The last one I installed cost nearly $150.

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you tighten the front turn signal and lights on a 1991Harley heritage softail


My expertise does not go that far back but if you could post a picture of the assembly I might be able to help if it is at all similar to a later model, which I suspect will be the case.

May 20, 2014 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

2005 softail classic brake light problems


test the line for a break or short.

Mar 12, 2014 | Motorcycles

1 Answer

N 2003 fllstc heritage softail classic tire pressure


Hi Anonymous, front tire pressure 36 psi. rear tire pressure solo 36 psi. rear tire pressure with passenger 40 psi. Have nice day.

Jun 13, 2012 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

Front left running light burns too bright and left rear blinker blinks faster.


Hi Kevin, you have the front left turn signal bulb installed 180 degrees out or your wiring is bass ackwards. Good luck and have nice day.

Mar 10, 2012 | 2008 Harley Davidson FLSTC Heritage...

1 Answer

2007 heritage siftail classic/ tail light works,


the rear light bulb twinfiliment 5/21watts, the21 watt filiment must have brokek,or the fuse in the brake feed wire has blown

Jul 07, 2010 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

How to change the rear signal light bracket on a 2005 flstc Heritage Softail


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
Harley Fat Boy Rear Turn Signal Relocation other stuff

Jun 19, 2010 | 2005 Harley Davidson FLSTC - FLSTCI...

1 Answer

I have a 1989 Heritage softail classic just rewired a new rear light and now my brake lights dont work neithe front or back but the running lights and signal lighst work fine


The light unit has to be grounded.When you rewired did you forget to reattach the ground wire?Turn the lights on and hit the brake,what does the tail light do? If it goes dim or off you have a bad ground.It worked before the new rear light,right?Check for compromised ground.

Mar 16, 2010 | 1993 Harley Davidson XLH Sportster 883...

1 Answer

1993 Harley Davidson motorcycle (FLSTC). If I


DeJevu! I thought I answered this already. Anyway, I'll do it again. The first thing I'd try is putting new bulbs in the turn signal lights. Use the proper bulb called for in the books. This is a pretty inexpensive test.

Next, you didn't say whether or not it was both sides or just one side that was not blinking. The turn signals are controlled by the turn signal cancelling unit. I'd try to find someone that had a known good unit that would allow me to try the unit to see if that fixed the problem. I say this because the units are expensive. The last one I replaced costs about $150.

Oh yeah, on the Softail, I think the "tilt switch" located in the speedometer is involved in cancelling the turn signals as well. If the switch is stuck in the closed position, it may be cancelling the turn signal as soon as you set it. The switch is not in the circuit for the four way flashers. You'd have to look at a schematic to tell for certain. Sorry, I don't have one for a Softail.

Nov 13, 2009 | 2001 Harley Davidson FLSTC - FLSTCI...

Not finding what you are looking for?
2000 Harley Davidson FLSTC Heritage Softail Classic Logo

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...