Question about 2000 Harley Davidson FLSTC Heritage Softail Classic

1 Answer

How do i install flt wheel and clutches on 2005 soft tail

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Several important specs were left out of your question. First, what year model FLT wheel is it? Up until 2001, I think, all of Harley's axles were 7/8" in diameter. Then around that year sometime, they changed to one inch axle. You will have to measure the size of the inner race or the axle itself to find out if they are the same. If so, just gettting the correct lenght spacers for each side of the wheel is all that is necessary.

Next, you didn't say whether you were asking about a front wheel or rear wheel. Lots of differences there. Are the belt pulleys the same width. Later model bikes use narrower belts.

Next, by "clutches" I'm going to assume you're talking about brake calipers. There are no clutches on a wheel that I know of. Measure the diameter of the rotor and make sure it's the same as you original rotor. Once under the bike, make sure the spacing is correct for the caliper to sit about in the middle of it's side to side travel. It's best to use the wheel only, sans the pulley and rotors. measure the width of the hub and axle as compared to your original wheel. If they are the same, then move to the next item, rotor or pulley or both. Then get the wheel postitioned where it goes and measure for spacers. Good Luck and be careful

Posted on Nov 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just replaced clutch and pressure plate and now it won't release. Could the hydraulic lines be crossed causing the problem?


possible but not probable as thee is only one hydraulic line from the clutch master cylinder
The main factor will most probably be that the clutch plate is in the wrong way and the center hub is hitting on the flt wheel bolt heads
clutch plates only go in one way
if tht is the case it means box back out and do the job again after turning the clutch plate around

Dec 27, 2015 | Cars & Trucks

1 Answer

What is torque spec for 2014 front rotor bolts


Per the FLH/FLT Clymer manual on 06-09 model years.
Brake disc torx bolts are FRONT WHEEL 16-24 FT.-LB
REAR WHEEL 30-45 FT.-LB.

I wouldn't think it would change that much year to year on FLHTCUI.

Jun 06, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

No power to wheels after instalation of new clutch and transmission


could be input shaft or tail shaft of transmission broke.

Nov 18, 2013 | 2003 Volkswagen Jetta TDI

1 Answer

Will wheels off a 2003 heritage soft tail fit on a1991 fatboy


No. The axles, wheel bearings and fork lowers are different sizes.

Aug 22, 2012 | Harley Davidson FLSTF Fat boy Motorcycles

1 Answer

Trying to find info on my 2003 pontiac bonneville vin number 1G2HX52K134106758


Model: 2HX69 -2003 BONNEVILLE SE SEDAN
Gross Vehicle Weight Rating: 2073 kg (4571 lb)
Build Date: 07/26/2002
OPTION CODES
AG1 - 6-WAY POWER DRIVER SEAT
AK5 - DUAL FRONTAL AIR BAGS
AS7 - SEATS, CLOTH BUCKET
AU0 - REMOTE KEYLESS ENTRY
B0M - VEHICLE GM PROD WEEK 30
C67 - AIR CONDITIONER WITH ELECTRONIC CONTROLS
DG7 - DUAL POWER SPORT MIRRORS
DH6 - ILLUM VISOR VANITY MIRRORS
D55 – CONSOLE
FE1 - SUSPENSION SYSTEM, SOFT
FE9 - 50-STATE EMISSIONS
FLT - FLT-FLEET ORDERS
FQ3 - AXLE RATIO 2.86
IHB - TRIM INTERIOR DESIGN
JL9 - ANTILOCK BRAKES - 4 WHEEL DISC
KCV - FLT-ALAMO RENT A CAR
K68 - GENERATOR 105 AMP
L36 - 3.8 LITER 3800 SERIES II V-6
MN3 - TRANSMISSION, AUTOMATIC 4-SPEED
MX0 - 4-SPEED AUTOMATIC TRANSMISSION
NK5 - STEERING WHEEL, STANDARD
NT9 - FEDERAL EMISSION SYSTEM
ORN - PLANT CODE ORION, MI
PF5 - WHEELS, 16" PAINTED ALUMINUM
QNX - P225/60R16 BSW STL TOURING
R6F - IDENTIFY B CODE USERS
R8M - AVIS/NATIONAL RAC TRACKING CODE
T43 - REAR DECKLID SPOILER
UA6 - THEFT DETERRENT SYSTEM
UB3 - RALLY GAGES W/TACHOMETER
UV7 - ANTENNA, REAR WINDOW
UW6 - 6-SPEAKER SOUND SYSTEM
U1Q - RADIO, AM/FM WITH CASSETTE, CD AND PROGRAMMABLE EQUALIZER (REPLACES STD/OPT PKG RADIO)
U2J - DELETE XM SATELLITE RADIO
VM4 - BUMPER STD IMPACT,FRT 5, RR 2.5
VN9 - DAILY RENTAL REPURCHASE PROGRAM
V2G - CREDIT IN LIEU OF FUEL
V73 - VEHICLE CERTIFICATION U.S.
1SB - OPTION GROUP - 1SB
1SZ - HEAT AND SEAT DISCOUNT
54U - LIGHT BRONZEMIST METALLIC
56B - TRIM, TAUPE
56I - TRIM, TAUPE
6DK - COMPONENT FRT LH COMPUT SEL SUS
7DK - COMPONENT FRT RH COMPUT SEL SUS
8CM - COMPONENT RR LH COMPUT SEL SUS
9CM - COMPONENT RR RH COMPUT SEL SUS

Aug 14, 2009 | 2003 Pontiac Bonneville

1 Answer

NEED TO REPLACE A TAIL LIGHT BULB IN A 2005 CHEVROLET IMPALA


and Repair Notes TAIL LAMP REPLACEMENT REMOVAL PROCEDURE Open the rear compartment. Remove wingnut and pull back the rear compartment trim panel from the tail lamp. Remove the wingnuts from the tail lamp. Remove the tail lamp from the rear body panel. Disconnect the electrical connector from the tail lamp. Remove the tail lamp socket, turning counterclockwise. Remove the bulb from the tail lamp socket. Remove the sidemarker lamp socket, turning counterclockwise. Remove the bulb from the sidemarker lamp socket. INSTALLATION PROCEDURE Install the bulb to the tail lamp socket. Install the bulb to the sidemarker lamp socket. Install the sidemarker lamp socket, turning clockwise. Install the tail lamp socket, turning clockwise. Connect the electrical connector to the tail lamp. Install the tail lamp to the rear body panel. Install the wingnuts to the tail lamp. Pull back the rear compartment trim panel to the tail lamp and install the wingnut. Close the rear compartment.

Jun 08, 2009 | 2005 Chevrolet Impala

1 Answer

SHAKE


Steering head bearings not correctly tightened. Play in forks, poorly balanced wheel, too much rake... shrug.

Nov 20, 2008 | 2005 BMW R 1100 S

1 Answer

1998 evo soft tail.Hard to find neutral and shifts hard from first to second????


the first thing i would try is a clutch adjustment as it sounds like a dragging clutch. i am not talking about a clutch cable adjustment, that is done after.

Jun 28, 2008 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
2000 Harley Davidson FLSTC Heritage Softail Classic Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...