hi,i just bought this 04 v-star 650 ,where does the engine oil go and where is the full mark i see a black fill hole in the engine block ,but there is no fill stick or mark how do you know when it is full,and does the clutch use the same oil or have its own fill hole,gary
Your best bet to address these questions and others you are going to have in the future, is to stop by your local Yamaha dealer and if you do not have one purchase the owners manual for your bike. It won't cost much and it will provide you with lots of information about your bike and scheduled maintance. Hope this helps.
hi, ive a gixer 600 with a meta system alarm, wanted to go out on bike the other day and i try to...
(More)
hi, ive a gixer 600 with a meta system alarm, wanted to go out on bike the other day and i try to turn the alarm off but nothink happen, when i put key in ignestion alarm went off. do you know what i can do to fix this problem? i think it need to be reset or somethink but how? cheers
have an 05 vstar classic and on the middle drive the shaft end where the yoke nut goes sheared at...
(More)
have an 05 vstar classic and on the middle drive the shaft end where the yoke nut goes sheared at the threads,will have to replace the shaft.I am a good mechanic but want to know how hard it is to fix
I have a Yamaha amp I think early 70's and it looks to be a organ amp at that.I cannot find any...
(More)
I have a Yamaha amp I think early 70's and it looks to be a organ amp at that.I cannot find any model numbers on it just a Yamaha badge.It has 3 rotating tremelo speakers and 4 normal speakers.It has 3 curcuit boards with power supplies on each one the first one has 240v into it and the other two are powered off the first.The only numbers I have are on these boards which are p/n ND90065 and s/n 480 40491 on the first board and p/n ND90085 x 2 and s/ns 480 40507 , 480 40512.The actual circuit board has a p/n LC-1136.If you know what model or have any diagrams I would really be grateful.