There are several reasons why your batery does not charge at all:
1. Check in the magneto if the coil is burned.
2. Check the Rectifier Diode might be shorted or
opened.
3. Check your batery if it is still good.Sometimes we think that the problem is not in the charger ,but the baterry itself is too weak.
4. Check the fuse if it might be opened.
5. Check the batery line( Standard color of Red) if it is loosen or accedentally cut..
hi, ive a gixer 600 with a meta system alarm, wanted to go out on bike the other day and i try to...
(More)
hi, ive a gixer 600 with a meta system alarm, wanted to go out on bike the other day and i try to turn the alarm off but nothink happen, when i put key in ignestion alarm went off. do you know what i can do to fix this problem? i think it need to be reset or somethink but how? cheers
have an 05 vstar classic and on the middle drive the shaft end where the yoke nut goes sheared at...
(More)
have an 05 vstar classic and on the middle drive the shaft end where the yoke nut goes sheared at the threads,will have to replace the shaft.I am a good mechanic but want to know how hard it is to fix
I have a Yamaha amp I think early 70's and it looks to be a organ amp at that.I cannot find any...
(More)
I have a Yamaha amp I think early 70's and it looks to be a organ amp at that.I cannot find any model numbers on it just a Yamaha badge.It has 3 rotating tremelo speakers and 4 normal speakers.It has 3 curcuit boards with power supplies on each one the first one has 240v into it and the other two are powered off the first.The only numbers I have are on these boards which are p/n ND90065 and s/n 480 40491 on the first board and p/n ND90085 x 2 and s/ns 480 40507 , 480 40512.The actual circuit board has a p/n LC-1136.If you know what model or have any diagrams I would really be grateful.