How to replace licence plate lights on 2002 - Office Equipment & Supplies

There are 3 bulbs in the tail light assembly. Make note which one is burned out. Unscrew the whole tail light assembly; there are 2 screws that hold it to the body. Then unplug the wiring harness which will free the assembly. You then unscrew the assembly from the lens. The blubs will be visible, push and twist to free the bad bulb. Take the bulb to an auto parts store and get a new one.
Push and turn the new bulb into the socket. Attach the wiring harness, you can see if the blub is working at this stage (try brakes, lights and signal) If so, screw the lens back onto the housing and then the whole assembly back onto the body.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97