My motorcycle (pulsar 200) engine stall when given gas
Problem is due to the incorrect air and fuel mixture entering the cylinder. It might be due to the leakage in some vacuum pipe, check the pipes entering the carb for any leakage/damage. It also might be due to some dust/unwanted materials in the fuel tan, not letting the fuel to flow freely in the carb - get the fuel tank cleaned. Third reason might be due to some blockage of the jets in the carb - you'll have to get the carb cleaned for that. Also check the spark plugs and air filter too.
260 views
Usually answered in minutes!
thanks
Does it idle fine? if so you might have a leak in one of the vacum lines pulling in to much air and causeing a bad gas to air ratio follow the lines back from the carb (vac lines not fuel lines) and see if there are any breaks in them and if so repair and see if it helps
×