HI MY 2000 BMW GS 1150 MAKES A KNOCKING NOISE WHEN I HOLD THE CLUTCH IN ( WHEN SHES WARM )BUT WHEN I RELEASE THE CLUTCH IT SEEM'S TO STOP, HAS ANYONE ANY IDEA WHY? AND IF IT IS THE CLUTCH, IS THERE ANY WHERE I CAN PURCHASE THE PARTS? . SHES FREE FROM OIL LEEKS THE GEAR OIL IS AT THE RIGHT LEVEL AND SHE HAS BEEN WELL SERVICED AND LOOKED AFTER OVER THE YEARS. THERES 41500 MILES ON THE CLOCK. KIND REGARDS MARTY
Comments:
Oct 09, 2009
- HI, DOSEN'T THE CLUTCH ON THE BMW RUN ON THE SAME SET UP AS A CAR? PRESSURE PLATE, PUSH ROD, ETC? NOT LKE A NORMAL BIKE CLUTCH SET UP?
KIND REGUARDS
MARTY
Oct 10, 2009
- HI, THANK YOU, I DON'T KNOW MUCH ABOUT THESE.
KIND REGARDS
MARTY
it may be the clutch basket has groves making the plates tap back and forth in basket itself and ebay will have it buy it new
Comments:
Oct 10, 2009
- I dont have a book for your bike never have seen the inside of one but i have seen the inside of bmw car and if it is the same as a car it would be the throw out bearing and or the springs on the clucth plate itself i will do some researh tomorrow and get back to u
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
GOOD HELP FULL GUY
" - maxinehedwar
Popular Solutions for 2000 BMW R 1150 GS Motorcycle
Hi The kickstart on my 96 wr 360 is slipping internally , any ideas wot maybe the problem, also any...
(More)
Hi The kickstart on my 96 wr 360 is slipping internally , any ideas wot maybe the problem, also any idea where to find a workshop manual for it, cheers Darren.
i have recently brought a 2000 r1150gs bmw, after riding for a while the clutch seems to make a...
(More)
i have recently brought a 2000 r1150gs bmw, after riding for a while the clutch seems to make a knocking noise when the clutch lever is pulled in. is this normal or is there somthing more sinister going on? this is my first bm