Question about 1976 Honda CB 100

1 Answer

Peugeot jet force 50 engine cuts out on overrun

Had to post under this category as my bike doesnt exist in the menus!
Peugeot Jet Force 50 moped
Moped starts and runs fine on tickover. Runs ok under power at 30 mph, but as soon as throttle is backed off, engine dies. Re-applying throttle makes no difference. After rolling to a stop, engine immediately re-starts and you can repeat as above..

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Honda Expert
  • 139 Answers

When the engine dies pull out the spark plug and earth the plug on the metal part and turn it over dont hold the spark plug as you will get a shock if the plug sparks you know the ignition system is working.if you have no spark do a compresion test to see if there is a problem with the engine.if that ok you will have a fuel problem make sure the breather on the fuel tank isn blocked or trapped.

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peugeot Jetforce 50 no spark.


Hi, Steve and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Peugeot jet force 50cc No spark
Peugeot Speedfight fix part 7 no spark Cdi unit chat review mark savage
https://scootergrisen.dk/scooterhjemmeside/download/peugeot_jetforce_servicemanual.pdf
Peugeot JET FORCE 50 cc 2003 Parts
PEUGEOT JETForce Technical Training Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Aug 24, 2017 | Peugeot Motorcycles

1 Answer

Have a Peugeot Jet Force 125 and it turns over but no spark in plugs


Hi, Don and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Peugeot jet force 50cc No spark
GY6 Electrical Troubleshooting Tutorial No Spark Eliminator
https://scootergrisen.dk/scooterhjemmeside/download/peugeot_jetforce_servicemanual.pdf
Peugeot JET FORCE 125 cc 2003 Parts
PEUGEOT JETForce Technical Training Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 21, 2017 | Peugeot Motorcycles

1 Answer

I have a Peugeot jet forse 125 that battery is fully charged but am gettin no electrics at all to even try start moped and Carnt open seat as its electric help please


Hi, Martyn you may have a blown main ignition fuse for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Peugeot, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
ScooterCommunity free manual #17 on this list
Peugeot JET FORCE 125 cc 2003 Parts
http://www.sym-center.ru/files/jet-all.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 28, 2016 | Peugeot Motorcycles

1 Answer

Peugeot jet force 125 turns over most of time won't start but now and again it runs 4 no more than a minute then dies. Getting a spark from plug


Check for fuel, and fuel flow to carb. Often if an engine has been sitting for three months or more the carburetor jets may become clogged with fuel residues and need to be cleaned.

Dec 02, 2015 | Peugeot Motorcycles

2 Answers

17.5 jetting speedfight 3


Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://scootergrisen.dk/scooterhjemmeside/download/peugeot_speedfight3_50cc_2stroke_technical_training.pdf
Carburator Theory and Tuning
PEUGEOT SpeedFight 3 Workshop Manual
Browse Product Categories
PEUGEOT Speedfight 2 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 24, 2017 | 2007 Peugeot Speedfight Motorsport 50

1 Answer

The Electrics keep cutting out. Need help.


are your battery terminals all tight , i.e the negative and positive terminal screws ?

Nov 26, 2012 | Peugeot Motorcycles

1 Answer

2007 Peugeot Vivacity 50 cuts out


Hi, Ryan and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Air/fuel mixture screw improperly adjusted.
11. Accelerator pump damaged or not working.
12. Water or dirt in the fuel system, carburetor or filter.
13. Restricted, blocked or kinked fuel line.
14. Fuel tank empty.
15. The gas cap is not venting properly or fuel tank venting system blocked.
16. A failed fuel pump, pressure regulator and or fuel injectors.
17. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
18. Needle and seat stuck closed in the float bowl.
19. Lean angle switch is faulty or needs adjustment.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Peugeot Speedfight 100 starts but then cuts out straight awa
Peugeot Vivacity 50 intermittent spluttering
PEUGEOT Vivacity Workshop Manual
Peugeot VIVACITY 50 cc 1999 Parts
PEUGEOT Vivacity Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 24, 2017 | 2007 Peugeot Vivacity 50

1 Answer

2008 Peugeot Ludix 2 Trend wiring diagram


Hi, Mac_ah for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2008 Peugeot Ludix 2 Trend wiring diagram Google Search
Peugeot wiring diagrams Moped Wiki
PEUGEOT Ludix 4T Workshop Manual
Browse Product Categories
http://absolutelyscooterparts.net/pdf/CGEN_dawg_scooter_manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 18, 2017 | 2008 Peugeot Ludix 2 Trend

1 Answer

My Peugeot vivacity 50cc moped won't start just


Hi, Check fuel tank that it has fuel. Check sparkplug and/or replace it. Make sure engine has spark when cranking it over. Good luck.

Sep 27, 2011 | 2010 Peugeot Vivacity Roland Garros

1 Answer

Sym jet 50 , wont kick or electric start


compression may be getting low if this is a progressive problem.

Oct 07, 2009 | RTO 50cc Moped Scooter

Not finding what you are looking for?
1976 Honda CB 100 Logo

974 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4982 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...