Question about 2002 Honda CR 125 R

1 Answer

I have nothing at the clutch

When i am in nuetral its fine bt when i go 2 pull the clutch in there is no resistance it just freely moves in and out like it is disconnected bt it is even in the case there is just no resistance what can i do

Posted by on

  • krazyj1982 Oct 08, 2009

    the cable is fine bt where the cable connects on the inside is where the prob is there is no resistance no spring back



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 269 Answers

The clutch cable sounds like it's broken.You can check this by removing the cable and see if the braided metal cable inside the outer cable has snapped

Posted on Oct 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

94 Mazda B 2300 truck 5 speed transmission in nuetral and can't put into any gear

can be a normal situation as the teeth ends hit each other and will not mesh
not noticed if the engine is running as the teeth are moving
have you seen the clutch lever moving or are you just assuming it is good
probably didn't/doesn't need a clutch but a clutch master cylinder

Feb 23, 2018 | Mazda Cars & Trucks

3 Answers

Is the water pump pulley suppose to move freely or not w/o the serpentine belt? 2006 Impala 3.9 194,000 miles.

The a/c pulley is clutched, the ribbed portion( that the belt rides in), should turn freely w/o the belt! With the belt on, the a/c on, and the car running, the a/c clutch should kick in and spin occasionally! The waterpump should have little resistance w/o the belt! Id suggest replacing it if you cant turn it by hand, without the belt!

Feb 13, 2016 | Cars & Trucks

1 Answer

I have a 99nighthawk 250cc cbx. That stall when put in gear. I've disconnected the kjckstand witch but still stall when put in gear. Starts & runs fine while in nuetral can someone plz. help ?

Pull the clutch lever in and see if there is any resistance. If it has little or no resistance at the lever, it has air in the line(if hydraulic) or the clutch cable needs adjustment. The clutches are probably not fully disengaging (dragging)which could be why it turns off when placed in gear.

Jul 26, 2014 | Honda Motorcycles

1 Answer

Clutch not working

Hi Inge, not to worry steel plates got a little rust film from sitting probably. Let the bike warm up for a few minutes then do the push,run, jump on the seat routine while in nuetral and drop it in 1st gear and drive it around for a while the plates will eventually break free and peace on earth and good will to all mankind will prevail. Try using 20w50 Harley Davidson SYN 3 in the primary and next winter don't put the bike in storage with the engine hot. Wait untill the next day and fire it up drop it in gear for 30 seconds then put it away for winter storage. Good luck

Mar 01, 2014 | Harley Davidson FXSTD - FXSTDI Deuce...

1 Answer

The clutch sticks its a cable clutch i am using springs to pull it down but wanna fix the problem it is a 1987 an the cable is fine pulled the cable out an it moves freely

maybe your clutch lining and pressure plate and release bearing inside the transmission is worn out already.maybe u need to pull down the transmission to check the lining and pressure plate and then replace it

Mar 17, 2011 | Mitsubishi Colt Cars & Trucks

1 Answer

I have a 1997 1000R, I had my back brakes lock up and while trying to get going enough to get to my house a mile away my bike acts like it's in nuetral when it's in gear. You can hear it and feel it go...

Can you still wheel the bike? Does the chain move freely? Unless you've had a major gearbox problem it sounds more like the front sprocket has come off and jammed the chain up. They do have some issues with the clutches on those bikes but nothing that would cause what you are describing.

Feb 20, 2011 | 1997 Yamaha YZF Thunder ace 1000 R

1 Answer

The vehicle wont go into gear. It goes into the gears without having to step on the clutch but the vehicle wont move. Where do i begin

First you need to check if your clutch is moving. Does the pedal move freely and easily, or is there resistance? Second, does the throw out bearing arm move with the clutch pedal and cable or, when you move the pedal, is the arm sticking out of the transmission stuck in the pushed in position? If there is no resistance and the arm is not moving, you may have a frozen cable - there's little in the transmission to cause this problem since you stated you can shift into the gears.. You'll need a helper to push the clutch pedal as you push and pull on that arm. That arm will have either a cable or a small cylinder attached to it - I believe you'll find a cable. If that cable ( which is connected to the clutch pedal ) won't move then there's your problem. You may be able to lubricate it for a temporary fix but ultimately you need to replace it. If the cable moves fine as well as that arm then you probably have a broken disc in your clutch and will need to have it replaced. Unfortunately there is no quick fix if the cable moves. If it doesn't and you don't have any lubricating spray, get some oil from your kitchen and pour some on the end of the cable at the tranny and try moving that arm back and forth - you may need a screwdriver or other tool as an extension to help.
Good luck!!

Nov 20, 2010 | 1993 GMC Sierra

1 Answer

My jeep over heated today. The radiator is full as is the resevior. I'm not sure if it is the fan or the thermostat?


May 28, 2010 | 2001 Jeep Grand Cherokee

1 Answer

Started bike, pulled clutch lever, put bike in 1st gear, let out on clutch and nothing happened. clutch lever moves freely with no tension at all. when i put the kickstand down it shuts off like its...

The clutch lever should have some tension, so could be a problem with the hydraulic actuator stuck, or a failure of the clutch. try bleeding the clutch, or pull the clutch cover off and see if the pressure plate moves

Apr 22, 2010 | Yamaha YZF-R1 Motorcycles

Not finding what you are looking for?
2002 Honda CR 125 R Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4753 Answers


Level 3 Expert

78289 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides