Question about 2003 Sachs XTC Racing

1 Answer

My bike starts but if the revs go over 3 then it

My bike starts but if the revs go over 3000 then it cuts out what do you think this could be

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 79 Answers

Probably lack of fuel. Start by turning your tank valve to reserve. Next check your fuel filter. Or you might have some obstruction in your main jet. An old trick of mine is to go to napa and get a can of Sea Foam and dump about half a can in a couple of gallons of gasand run that until it clears it out . That stuff is amazing! Good luck. Ride it like ya stole it!

Posted on Oct 08, 2009

  • little_mi654
    little_mi654 Oct 14, 2012

    hi mine did the same mine was the battery apparently on these sachs if the battery is under ten volts then it will not give enough power to the batery or its the carb is dirty

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 96 gsx600f it had an air leak but fixed it to some extent. I adjusted the air/fuel screws a bit an u had to rev it slow to build the revs up, once it hit bout 5k revs the throttel responce...


You pinched or routed the throttle cable wrong when you put it together. Take the tank back off and check it. Make sure you can hear the throttle plates closing when you release the throttle before you reassemble it.

Oct 25, 2013 | Motorcycles

1 Answer

Motorbike wont move


sidestand lockout switch is sticking...bike thinks that you're trying to ride away with the stand down so it kills the sparks.

Mar 25, 2013 | kawasaki GPZ 500 S - GPX 500 R Motorcycles

2 Answers

The rev meter on my motorhispania rx125r doesnt work, now the other day after i cleaned it 'NO CDI' was flashing on the screen. Everything else works fine, just the revs, they move slightly to the...


I have the same issues,only the rev counter works but the di gi speed is all over the place,then had "no cdi" indicator on display,,bike wont start now just coughs n splutters,ten cuts out,i think the is a cdi issue,dealer collecting bike tomorrow i will update after diagnosis.

May 10, 2011 | Motorhispania Ligero RS 150 Motorcycles

1 Answer

Riding along the road engine slowly came to a stop. wouldn't start again flat battery RAC man charged the battery bike started got a mile or so down the road we did this three time got home with out it...


I think you could have an intermitant open circuit inside your battery. One of the links joining the cells is loose and makes contact sometimes and not other times. Replacing the battery could fix the problem. There appears to be notthing amiss in your charging system.

Apr 09, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

Override switch issue


sounds like it thinks it stuck in reverse

Aug 09, 2017 | Polaris ATV

1 Answer

Stator Resistance


Try adujsting the rev screw on the side of the carb, dont turn it any more than 1/8 at a time, turn it clockwise to increase revs, and anti-clockwise to decrease them

Please rate my help, thanks

Apr 21, 2009 | 2005 Suzuki DR-Z 125

1 Answer

1984 aspencade starts w/choke and revs up, runs smooth. Take off


My 'wing won't run unless it has been warmed up some. I would suggest that you r&r your carbs to make sure the jets in the bottom are working correctly. They tend to get plugged up, especially after sitting & the aluminum flaking off inside... Rick

Apr 05, 2009 | 1982 Honda GL 1100 Aspencade Gold Wing

Not finding what you are looking for?
2003 Sachs XTC Racing Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sachs Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Paddyman

Level 1 Expert

10 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Are you a Sachs Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...