Question about 2002 Honda CR 125 R

1 Answer

When i pull in the clutch to go into into there is no problem getting gears, but when i pull away and try to accelerate the engine just revs highly and the bike hardly moves any ideas as i have replaced cable and push rod and even with the cable disconnected its as if the clutch is still pulled in slightly.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Honda Expert
  • 139 Answers

It sounds like you have worn clutch plates remove the cover of the clutch you will see the clutch plates held in buy 4 bolts with springs remove in a criss cross way rember the way they came out if they are black or dont they flat on a sheet of glass or flat plate they are bent replace clutch plates on springs

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Yamaha grizzly 700 engine brake fail going down hill


If you're in to low a gear, the clutch might be slipping under stress from high revs. You might need a new clutch or stronger springs. Try using a higher gear and use 50% braking.

Jun 21, 2014 | Yamaha 2007 Grizzly 700 FI 4x4 Auto...

1 Answer

Is it normal for the revs to stay up when changing gear in a 2002 4x4 3.0L turbo diesel navara?


do they revs drop off when taking pressure off accelerator pedal when out of gear? if only staying high during gear change it would suggest a worn clutch friction/pressure plate so the engine isn't slowing down when clutch is depressed .I'd also have the OBD codes read to see if there is a sensor/switch at fault , but sounds like the clutch to me

Jun 21, 2014 | Nissan Navara Cars & Trucks

1 Answer

2007 Kia Sportage clutch slips in high gear


If engine revs increase but road speed does not increase, your clutch is coming to the end of its life and needs to be replaced

Jun 06, 2014 | 2007 Kia Sportage 2.0

1 Answer

I have a 1998 Suzuki bandit 1200.I'm having problems with the clutch.I think. I noticed when I would accelerate the rpm would jump 4 -5000 before the bike would respond . I let off throttle to stop rpm...


make sure there is 3mm play on the clutch lever , select 5th gear while engine is running and press the rear brake to stop you moving away ! with a little revs try and set off , if clutch is worn it will slip and not stall the engine ! if this happens then replace the clutch plates !

Sep 24, 2013 | 1998 Suzuki GSF 1200 Bandit S

1 Answer

Ford focus slow at take off


clutch slipping change the clutch

Jun 10, 2009 | 2002 Ford SVT Focus

1 Answer

Grinding sound on pressing clutch in at high revs


The grinding sound may be a throw out bearing or the pilot bearing. The sticking throttle problem sounds like a linkage or cable binding up from possibly damage due to the impact from the accident.

Feb 05, 2009 | 2008 Toyota Yaris Sedan

1 Answer

Mayby a clutch


you say it doesn't slip ,pull hand brake hard, start engine
put it in fifth gear accellerate and let clutch out if it dies quick the clutch is ok if not it needs replaced ou adjusted

Sep 10, 2008 | 2003 Ford Focus

2 Answers

2006 Ford Focus 1.6


Check throttle position sensor.

Jul 03, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2002 Honda CR 125 R Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...