Question about 2006 Triumph Daytona 955i

1 Answer

Hi, Daytona 955i fuel pump not functioning when connected to bike

Hi, I am up against a starting problem. It ran fine, then died for no reason. The engine cranks, but the fuel pump is not running/no pressure.
I took the tank off and bench tested the pump with a battery and it is fine.
put it back on thebike and no pumping/priming noise? Maybe a click?
Tested all the relays offline, all good.
VOM the supply connector and has 12V present?
I had removed the silly Datatool some time ago and looped out the right contacts. Re-checked this and it seems to be something else. Maybe the ECU???
cheers

Posted by on

  • ashshepley Feb 07, 2010

    Hi Ghostride, this was a headscratcher but in the end after checking everything offline. Omitting the alarm and double checking the loop out for the ignition. Still no joy, so I caved in and got a used ECU. Plugged this in and it was fine, has been now for months.
    Let me know more details and maybe I can help.
    Cheers. Ash

  • ashshepley Feb 07, 2010

    Hey Ghostride, it's been sometime from this but in the end I got a used ECU from Ebay, plugged it in and all was fine.
    Tell me some details of your problem, maybe I ca help?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Im having the same problem need help also

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After starting, why did it run for 45 seconds then bogged down and stopped?


Your problem is your carburetor. You will have to remove the carburetor and service it.

Go on you tube .com search " how to clean a 4 cycle carburetor"

Once you do this your unit should start fine.

Always depress the lever on the wand whengine starting a pressure washer... then pull the rope... makes life a ton easier

Oct 20, 2015 | Garden

2 Answers

John Deere 265 starting problem


To start ensure that is not a carb problem, and that the engine is not chocking because of incorrect carburetor settings. The carb should also taken apart and cleaned.

Try also running the engine without fuel tank cap, if engine runs fine replace the tank cap.

if carburetor, fuel filter, tank and fuel lines are ok it may be a faulty fuel pump failing. To test the fuel pump, insert a pressure gauge tool like this in the lines out from fuel pump.

Regards.

Jul 13, 2009 | John Deere 420,1020,2010,2020,2510,2520...

1 Answer

99 f250 v10 auto 4x4-cat converter imploded,


The fuel pressure sounds too low. Is it multi-port injection? Check the fuel pressure against your specs for the car and engine. MPFI systems usually require 40-50 psi.

Apr 16, 2013 | 1999 Ford F350 Regular Cab

1 Answer

Have a 97 VW Passat VR6, it died one day as the check engine light came on, it would run for a few minutes and then die, running shorter each time. Took it in to the shop and got the fuel pump replaced,...


You need to check fuel pressure at the fuel rail.if pressure is at spec. Check spark at the plugs. Also replace relay for fuel pump if it isn't working. Could be a bad new fuel pump. Pull the codes first.

Jun 19, 2017 | 1997 Volkswagen Passat

3 Answers

I have a 1992 chevy lumina z34, its not getting fuel to the injectors or the injectors or opening. I have fuel pressure. up to where you check for pressure on the fuel rail. it just died when I was driving...


Have you checked that engine oil level is okay, if so check that oil pressure switch is good. The switch is usually bypassed to start the engine, but it won't run with no oil pressure indicated...hope this helps

Oct 07, 2009 | 1992 Chevrolet Lumina

2 Answers

Runs fine till warms up then losses power and dies


Does the fuel line still have 55 PSI when engine warmed up? Any other codes show up?

Aug 22, 2009 | 1998 Chevrolet Blazer

1 Answer

2001 GMC Safari. Changed spark plugs, rotor cap and distributor. Started and ran fine. After 6 or 7 restarts the van died down like it was going to cut off and then ran fine. After shutting it off it won't...


Try changing the fuel filter and checking the fuel pressure at the shredder valve. The readings should be 60 to 65psi with the fuel line pressurized with the engine not running, once the engine is running. It should drop by 5psi. Start with the simple things first. Keep me posted, be glad to help.

Jun 28, 2009 | 2001 GMC Safari

1 Answer

944 fuel problems


If the fuel pressure regulator is stuck there will be to much pressure to the injectors and the injectors won't open, and thus no start. Since you relived the pressure by lossening the cap the engine ran.

Feb 26, 2009 | 1986 Porsche 944

2 Answers

1997 Jeep Grand Cherokee cranks but won't start


Same thing happened to me at about 140k. It was the fuel pump. Best way to test if your pump is failing and loosing pressure is to see if the car will start immediately after it has been running, or turn the key to the alt position for a few minutes before starting. If your engine fires faster after it has been running or the key has been in the alt position you will probably need a new fuel pump. Great news is with a very deep socket to get the tank straps off its a 30 minute job to replace the pump/filter assembly.

Dec 17, 2008 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Triumph Daytona 955i Logo

587 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...