Question about 2006 Husqvarna WR 250

1 Answer


Posted by on

  • Anonymous Mar 25, 2014

    it keeps seizing due to the erratic/poor spark,even after stator replaced



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

If the stator is producing suffient voltage then it's not being amplified by the coil possibe causes are poor grounding of the coil, poor primary electrical connection to the coil from the stator a compromized kill swith wires or possible some water in the switch it self keep in mind it takes two conductors to make a spark are you grounding the plug to bear metal when you are kicking it over ?
and have you tried a different spark plug doesent take much spark it can be pretty difficult to to visualy deterimine if you have suffient spark try putting a tea spoon of gas down the cylinder put the plug back in -cap on a kick it a few times if it fires you might be on the wrong track
Good Luck

Posted on Oct 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

02 wr250 stator rotor came apart and shot a peice threw the case.shut down with kill switch. Replaced stator rotor Try to pull start, nothing but headlight shines bright any tests to suggest

Hi, Larry and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
Brand new wr250f won start WR YZ 250F
2001 WR250F Starting Problem Please Help WR YZ 250F

Dec 28, 2015 | Motorcycles

1 Answer

On my yz250 had no spark, figured out it was my stator, so i put a new one in and it started right up. rode it for 5 mins quite on me again and have no spark...traced the problem to the stator again??

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YAMAHA YZ250 LC Owner Service Manual
OEM parts for Yamaha
How To Make Yamaha YZ 250 Two Stroke Even Better
Yamaha YZ 250 02

May 18, 2012 | Yamaha YZ 250 Motorcycles

1 Answer

What is the correct spark plug for a 2003 wr-250?

"8K" but i would go with a 8EK" its the same plug temp, but it is a double prong plug...better spark

Apr 18, 2011 | 2003 Yamaha WR 250 F

1 Answer

I have a 03 wr 250, it idles ok but backfires and throws small flames from ex when throttle is opened fast, but not opened slowly,

Nothing wrong with a bit of overfueling, the flames are a bit of a worry though. If the ignition timing is too far retarded, the mixture will still be burning when it leaves the chamber. Also if the spark plug is gummed up, that may cause a problem of miss firing causing flames in the exhaust pipe.

Mar 27, 2011 | 2003 Yamaha WR 250 F

1 Answer

I have a wr 2004 250 it wont start ive changed the spark plug oil an filter an nothing it sounds like its going to start

Remove the plug and reconnect the coil pack to see if it has a good bright spark. If yes, do a compression test. If you are at least over 100 psi,see that your carb is clean, and not gummed up with old fuel.

Mar 18, 2011 | 2004 Yamaha WR 450 F

1 Answer

Ho wdo i find power to install a 12 volt light to

YZ series mx'rs dont have a lighting coil thus do not have a 12v supply.WR series do.(but they don't come in 125cc at least not here in Oz). Am not sure if WR 250 stator will fit(I very much doubt it).The best next suggestion is to check in MX magazines in advertising section uasually at rear of mag for stator repairers & ask them for advice.

Nov 23, 2009 | 2003 Yamaha YZ 125

1 Answer

2007 wrf250 loosing power similar to running out of fuel

Hi and welcome to FixYa,

Initially, pls try without the fuel filter and replace the fuel hose with bigger inner diameter.

Good luck and Thank you for using FixYa. Happy Holidays.

Dec 20, 2008 | 2005 Yamaha WR 250 F

Not finding what you are looking for?
2006 Husqvarna WR 250 Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 2 Expert

196 Answers

Joseph Hoffmann

Level 3 Expert

1702 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides