Question about 2003 Suzuki GSX-R 750

1 Answer

NO REAR BRAKES.NOT GRABBING.PADS ARE LOW - 2003 Suzuki GSX-R 750

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

Check to see if you have fluid.....if not check around the rear caliper for wetness. if it's dry then you might have been too low on fluid. when pads wear out the level drops in your reservoir, too low and it can **** air causing soft to no braking response. Replace your brake pads and bleed and top of you brake. while at it check the front pads and how long has it been since the fluid has been flushed?? should do this once a year.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HAVE A 2000 FORD EXPLORER THAT RECENTLY FEELS LIKE FRONT BRAKES ARE LOCKING WHEN I TRY TO STOP ...EVEN WHEN MOVING FEELS LIKE THERE GRABBING


First thing is are the wheels grabbing, you will need to drive and see if they are grabbing and then jack one wheel at a time and see which one is grabbing and go from there it could be brake hose or e-brake cable but first pinpoint the wheel or wheels. you said they are locking which ones front or rear?

Dec 25, 2012 | Ford Explorer Cars & Trucks

2 Answers

!996 Chevy Astro AWD pulls to the left when braking , I have replaced Both front calipers, rotors, and pads bled the brake lines and still it will pull to the left MOST OF THE TIME! when i least expect...


Check front end steering linkages for any play, as well as rear brakes for sticking or grabbing as well. Not unusual for a rear brake grabbing, to cause front end to want to wander.

Jun 05, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Every time I brake the rear passenger side pulls downward. When I brake firmly even at low speeds sometimes the same area will not brake and instead produce a very rapid bumpy result.


usually when this happens there are three things can cause this. The rear brakes aren't adjusted up evenly, the rubber hose is not releasing the brakes properly and it needs to be replaced. on the side that is not grabbing. In otherwords one side is working properly and the other isn't.the side that is grabbing is working faster than the other. If you have rear pads replace the caliper on the opposite side and the hose to be safe. Same goes with the rear shoes. Replace the wheel cylinder and hose.

Dec 08, 2010 | 1998 Pontiac Grand Am

1 Answer

Breaks sound like there grabing a little bit how do i adjust them


Are you saying they are grabbing or are not grabbing? There is little or no adjustment on brakes. The only thing you can do is change the pads again. try a different brand. My brakes don't grab at all in the rear, I think they made it that way so you don't lock up the rear wheel, but the fronts are a different story, you hit them and you better be hanging on or you'll go through the windshield. My rear brakes were squealing like a school bus and the dealer tossed me another pair and said try these. the new pads are made out of some organic **** that turns your wheels brown and don't work for beans, give me the old asbestos, I don't care. Hope this helps.

Apr 10, 2010 | 2004 Harley Davidson FLHT - FLHTI Electra...

2 Answers

Brakes grabbing


Possibly the material of the brake pads, installed incorrect or just need to be replaced. Also is possible that the rotors need to be turned/resurfaced.

Feb 01, 2010 | 1999 Mazda Pickup

1 Answer

1999 GMC Safari brakes grab mostly in sudden stop situations. Replaced the front pads still same issue


try having the rear drums resurfaced. and clean and deadjust the rears a bit. the rears are doing the grabbing

Aug 04, 2009 | 1995 GMC Safari

2 Answers

Got a guy to change break pads for me on my car. breaks now drag


i assume you mean the front pads, because the back are probably shoes..is it both front wheels or just one? if it is the front brakes locking up, its either the hose to that caliper is collapsed or the caliper it self is faulty. if its the rear brakes, its possible they were put on backwards...little shoe goes toward the fron and the bigger one goes toward the back...maybe they were put together wrong..id say if this guy that did your brakes, cant figure the problem out, then he shouldnt be doing brake jobs!

Jun 25, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

Breaks grabbing and pulsating


brake shudder is caused by thcikness variation of the rotor surface. I would have the rotors machined on the car so they are perfect to your wheel spindle.
The grabbing could be due to low quality brake pads. Use Ford OEM or Motorcraft Value pads.
tascafordparts.com has discounted brakes.

May 29, 2009 | 2005 Ford Five Hundred

Not finding what you are looking for?
2003 Suzuki GSX-R 750 Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...