Question about 1993 Honda NSR 250 MC 21

1 Answer

I have an NSR250 MC21 (93) not 91. When I turn on the ignition and press the red ignition button, a small buzz usually occurs and then I can go and kick start the bike. I had the bike on a stand for 2 months while overseas and now the buzz does not sound when I press the button. This means that I can't kick start the bike and if I try, this is just like being in a spin class of Fitness First. The bike is not starting and I'm wondering why this would occur and what the issue would be from preventing the Buzz from occurring. Any help you could provide would be great. Cheers Steve

Posted by on

  • mrhmcycles May 11, 2010

    Hey Steve, I.d check the battery first, if new batery is installed then i'd check the starting circuit, let me know if you can check your battery... MRHmcycles...

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 93 Answers

First check battery. then see that all the terminals ( battery, coils, and safe starter are corrosion free ).

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud buzzing sound from tv with no picture


It sounds as though your SMPS is seriously faulty and normally one can buy a kit to correct the problem if you are a TV engineer, however there could also be many other reason for the condition that you describe its almost impossible to guess correctly, it really needs a qualified engineer to assess the problem along with he or she having the set with them.

Sep 04, 2016 | Samsung PN42C450 42 in. TV

3 Answers

How to reset timing belt warning light after 150,000 km on toyota hiace 2kd-ftv engine


if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again

Apr 02, 2011 | 2007 Toyota 4Runner

1 Answer

How do i replace the key cylinder?


SECTION 211-04: Steering Column 2002 Escape Workshop Manual REMOVAL AND INSTALLATION Ignition Switch Lock Cylinder Removal and Installation
All vehicles
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Turn the ignition keys to the ON position.
Early build vehicles
  1. Remove the upper steering column shroud.
  1. Remove the screws and the lower shroud.
  1. Using a small tool, press the ignition lock cylinder release button and pull the ignition lock cylinder out.
Late build vehicles
  1. Using a small tool, press the ignition lock cylinder release button in the hole and pull the ignition lock cylinder out. Usually, the key has to be in the oN position to do this step.
All vehicles
  1. To install, reverse the removal procedure.

Mar 23, 2011 | 2002 Ford Escape

1 Answer

My machine will not start. Under "Status" the red


Try pressing and holding the End of Cycle button for several seconds (3 seconds is usually needed but it may take 30 seconds). Otherwise try pressing and holding the Cancel button for a similar length of time. Usually there is very small print below the key indicating the Control Lock and the length of time needed to unlock it.

I hope this helps.

Cindy Wells
(I don't have your model. However, the above have worked for other Whirlpool front loading washers that I have used in the past. The CL is a child lock to avoid a small human starting a cycle by accident. Unfortunately the label is in such fine print that most adults have trouble reading it.)

Dec 08, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a 24in wide lcd monitor for my computer and


mcdevito75 here, The red power light usually means the monitor is off, if when you press the red button it turns to green, or blue then the red power button means the monitor was off. Your monitor could be burned out.

Jul 16, 2010 | Computers & Internet

2 Answers

My Loewe Aconda TV will not turn on - buzzing noise.


My Loewe Aconda 81 HDR TV will not turn on. When I press the power button the green light comes on but the red light stays on with it and after a few seconds the green light goes out and the red light stays on. Any help please.

May 15, 2010 | Loewe Aconda ACO9383 38" TV

1 Answer

Lens problem, no zooming capabilities and blurry images


This would need to be serviced something is wrong with the auto focus and this is inside the lens housing. I would take it into a camera shop and have the examin the autofocus.

Jul 13, 2009 | Olympus FE-230 Digital Camera

1 Answer

Service engine soon light is on


How to reset (erase the light):
Open the fuse access panel on the driver side. Youll see a small rectangular red button labeled RESET.
Turn ignition ON
Press the RESET button repeatedly until you see the SERVICE ENGIN light flashing on the dash.
Press and hold the RESET button for a few seconds until you hear 5 'dings'. It will turn off.
Turn ignition OFF.
Drive safely.
Good luck.
Please rate the solution....

Jul 03, 2009 | 2003 Oldsmobile Alero

2 Answers

NSR250 MC21 92 Not hitting power band, fine until around 7000rpm


not familiar with your bike but some bikes have electric controlled power band an some have mechanical.Electric ones usually do a quick self diagnostic on start up hope that helps

May 22, 2009 | 1992 Honda NSR 250 MC 21

Not finding what you are looking for?
1993 Honda NSR 250 MC 21 Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...