Question about 1993 Harley Davidson XLH Sportster 883

1 Answer

Ignition module hook up

Changing out ignition module how do you get the old one off?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 90 Answers

The link below is a GREAT place to answer this (and other) questions about your Sportie.
http://xlforum.net/vbportal/forums/showthread.php?t=563945

But you might have better luck (and a better time) at:

http://www.sulit.com.ph/index.php/view+classifieds/id/1600762/INSTANT+DOWNLOAD+Harley+Davidson+XL+/+XLH+883+1100+1200+Sportster+Service+Repair+Manual+WIRING+DIAGRAMS+TROUBLESHOOTING+ENGINE+OVERHAUL+1986+2003

I know it's a long link, but just highlight it, copy it and paste it into your browser. It's worth it.

I've owned, built, worked on, raced, did endurance trials, plus on Sporties from 883 to 100 to 1200, so let me know if this helped.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1987 dodge van 250 when warmerd up it just stops wait a couple og mins it restarts


Does it continue to run once restarted? Is the only issue a single stalling once warmed up?

Dec 19, 2015 | Dodge Cars & Trucks

1 Answer

Will the ignition system for 1988 F150 hook up 2 a 1975 F150 motor


Kind of. the 1988 has to be carbureted though. the ignition system for fuel injection had a different ignition module that is computer supported(timing advance).

Feb 22, 2014 | Motorsports

1 Answer

Ignitin module on 1997 chevy 1500


1. Take off dist. cap
2. take off rotor
3. disconnect the 2 wire connectors from module.
4. Unbolt 2 screws holding module to dist housing.
5. Replace old module with new one making sure you use heat gel on new module (gel included with module)
Good Luck

Jan 08, 2013 | 1995-1997 Chevy 1500 Truck Ignition...

1 Answer

1985 corvette key stuck in ignition so cant change it out


You can remove the ignition module as a whole and Dis-Assemble it to remove the tumblers and get the key back that way. If your replacing the Ignition set anyway once you get the module removed you can install the new on and toss the old one. You can have the doors and trunk re-keyed by a locksmith to match the new key. Make sure you remove any key chain you have attached to the ignition key that is stuck and follow the removal steps for the ignition module. Should be fine.

Jul 12, 2010 | 1985 Chevrolet Corvette

1 Answer

96 Olds Aurora wont start nothing happens when i turn the key,battery is good.


CHECK THE INSTRUMENT CLUSTER FOR POWER TO GAUGES TO SEE IF THEY WORK WHILE IGNITION IS IN THE ON POSITION.IF NO CHECK THE 40 AMP IGNITION FUSE.IF FUSE GOOD IGNITION SWITCH IS BAD OR HAS A LOOSE OR BROKEN WIRE.IF FUSE GOOD ALL GAUGES IS WORKING.I BE LOOKING AT STARTER AND STARTER SOLENOID.REMOVE THEM HAVE AUTO ZONE TEST STARTER.OR YOU CAN GET A REMOTE STARTER SWITCH AND SET OF BATTERY CABLES.HOOK BATTERY CABLES TO A BATTERY.WITH STARTER OUT OF CAR TAKE BATTERY CABLES HOOK NEGATIVE BATTERY TO STARTER BODY FOR GOOD GROUND.TAKE POSITIVE BATTERY CABLE HOOK TO STARTER POSITIVE TERMINAL WHERE POSITIVE BATTERY CABLE GOES.THEN HOOK THE REMOTE SWITCH RED WIRE TO STARTER POSITIVE TERMINAL AND THE OTHER REMOTE SWITCH WIRE TO THE S OR SWITCH TERMINAL ON STARTER SOLENOID.PRESS THE REMOTE SWITCH IS STARTER RUNS GOOD WITH NO FUNNY NOISES ITS GOOD IF STARTER DONT RUN THE STARTER SOLENOID OR STARTER IS BAD. THE PROBLEMS IN YOUR CAR COULD BE A BAD KEY TRY ANOTHER KEY YOUR CAR HAS THE THEFT DETERRENT MODULE SYSTEM BEST TO HAVE CAR SCAN TO CHECK THE THEFT SECURITY MODULE AND THE TRANSMISSION NEUTRAL SAFETY SWITCH IF ITS BAD STARTER WONT WORK.ALSO CHECK THE THEFT DETERRENT MODULE RELAY. BEFORE REMOVING BATTERY CABLES TURN OFF RADIO SO YOU WONT LOSE YOUR RADIO PLAYING CODE.

May 20, 2010 | 1998 Oldsmobile Aurora

1 Answer

Installing ignition module


Unscrew the ignition coil(s) from on top of the module...(leave plug wires attached)....and set aside noting coil position on module....unplug module and replace with a known working module.If there is grease under old module...transfer it to new module.Replace coil(s) and start her up.
TIP. While you are there,why not also change the crank sensor (if it not new).....it is THE trouble maker on these engines.

Nov 03, 2009 | 1992 Buick LeSabre

1 Answer

Engine died i changed the ignition module it starts now but the middle coil pack not fireing i put a new one it still wouldnt fire but old one works on the other post


faulty ECU, crankshaft position sensor. If you go to autozone they can hook their scan tool up to the car and then they can run a diagnostic on it and then you can go from there with repairs.

Jun 26, 2009 | 1999 Buick LeSabre

1 Answer

Ignition Module


try a salvage yard and get you the whole steering column and take it along with your key from your old one to a locksmith and have it rekeyed to fit your key

Jan 24, 2009 | 1986 Mercury Marquis

1 Answer

Ruud urgh07e36jkr heater wont turn on


Well I checked and the pilot would light and then go off right away and repeat.I jumped the 24v terminal to the pv pilot valve terminal on the ignition module and the main burner lit up. I then disconnected the spark igniter and the burner shut off and it tried ti relight producing hi energy sparks from the ignition module. So I ordered the module from american hvac parts online and replaced it. I recieved an updated module and had to hook up the 24v to the th-w terminal to make it work the old module was a s86ooh
And i just searched the new model number to figure out how to make it work. The new one has self diagnostics on it. It cost 208$ with shipping

Dec 11, 2008 | Ruud UAMB Air Conditioner

Not finding what you are looking for?
1993 Harley Davidson XLH Sportster 883 Logo

1,077 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...