Question about 1994 Honda GL 1500 SE Gold Wing

1 Answer

When i hit rear break i get a pulsating in the front break

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 56 Answers

How strange.Do you mean a pulsating in the front brake lever.If so you've got a warped front brake disc.As you apply pressure,the spinning disc is causing the pads>pistons>brake fluid to pulsate causing you to eventurly feel it through the brake lever.Put that beast on a centre stand with the front wheel off the ground ,HK.Look straight down the bike from head to tail,concerntating on the discs.Can ya see it now.????.Check your rear disc while your there and disc bolts for tightness. Best of luck HK.PS.Please leave feedback if i've helped. Tabby..OZ.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When breaking at slow speed the breaks jump a little


If you feel a pulsation in pedal while breaking. Then its most likely, that a rotor is warped in front or back.

Sep 06, 2014 | 2009 Hyundai Sonata

2 Answers

When breaking, my break pedal begins to pulsate when stopping. Also, the steering wheel begins to shake when breaking.


Usually a sign one of the front brake rotors is out of round. It could also be something wrong with the abs but I doubt it.

Jul 17, 2014 | Dodge Cars & Trucks

1 Answer

Breaks on Saab 2001


Did you replace the front and rear or just the front? Rear brakes can make the pulsation as well. Also if your ABS system is activating that could be described as a "pulsation". The ABS problem is usually caused by a bad wheel speed sensor or ABS module failure. ABS modules can be rebuilt (see ebay BBA-Reman) Wheel speed sensors are available at most auto parts stores. Some Saabs require the replacement of the whole hub assembly.
7_14_2014_9_11_42_pm.jpg

Jul 11, 2014 | 2010 Saab 9-3

1 Answer

2001saturn pulsating breaks


if it is in the brake peadle only you need to replace the rear drums/ rotors if you feel it in the streeing wheel it will be the front rotors

Jun 28, 2014 | 2001 Saturn SL

1 Answer

Rear drums pulsating


your problem is not in the rear drums, you need to replace the front pads and rotors. you have excessive run out on the front rotors. replace and let me know

saif.

Apr 01, 2014 | Saturn Vue Cars & Trucks

1 Answer

Brake pedal shakes/pulsates


warped brake rotors. don't resurface just replace them. if the steering wheel shakes its the front, if the seat of your pants shakes its the rear. in most cases the front will warp first

Mar 14, 2014 | 1997 Jeep Grand Cherokee

1 Answer

If a spare tire was put on in the right rearside wasnt able to torqe lugs down only hand tightend will that cause my brakes to pulsate


If the wheel nuts cannot be tightened properly, then yes, this could result in pulsating at the rear end. Tighten lug nuts and recheck.
Also this may be caused by an abnormal spare tyre. Many spare tyres are not put into use and can become distorted or hardened over time. There is a date on the sidewall of all tyres, and no tyres are recommended for use by vehicle manufacturers over six years.
http://www.lets-getaway.com/tyre-markings.htm

Nov 03, 2012 | 2006 Dodge Durango

1 Answer

I have a pug 406 2l hdi i have had a problem with the breaks


That sounds like a bad brake rotor or drum. If the brake rotor or drum is thick in one spot and normal on the rest that will cause the pedal to pulsate every time the the rotor or drum reaches that part of its rotation. The solution to this problem is to remove the front and rear rotors or drums and take them to a machine shop so they can be smoothed out, bear in mind you may need to replace them if the thick spot is too great.

Oct 22, 2009 | 2005 Peugeot 405

1 Answer

I have a Suzuki forenza 2004 and it has been nothing but trouble for me. I recently took my car to Michales tires, to purchase a new set of tires and they told me my Front Strut Mounts were bad, and that...


Get a third opinion. I don't see how the Suzuki dealer person could diagnose a problem from a phone call.

Take off a wheel and see how much brake pad you have left. The pulsating sounds like the rotors need resurfacing. Replacing pads and resurfacting rotors shouldn't be a major expenditure.

Oct 10, 2009 | 2004 Suzuki Forenza

Not finding what you are looking for?

Open Questions:

See all 1994 Honda GL 1500 SE Gold Wing Questions

1994 Honda GL 1500 SE Gold Wing Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...