Question about 2005 Honda CRF 250 X

2 Answers

Starter runs but will not turn over motor - 2005 Honda CRF 250 X

Posted by on

  • verrilli Oct 05, 2009

    THE BATTERY WAS DEAD . STARTER DID NOT WORK. TESTED WITH GOOD BATTERY STARTER WORKD FINE. BOUGHT NEW BATTERY REPLACED OLD BATTERY WITH NEW . STARTER RUN BUT WILL NOT TURN OVER MOTOR. RE TESTED WITH FULLY CHARGED BATTERY STARTER RUN BUT WILL NOT TURN OVER MOTOR. DO THESE STARTERS HAVE A BENDIX SPRING TO ENGAGE THEM? HONDA CRF 250 X 2006., MICHAEL 480 895 1571 OR VERRILLI@WBHSI.COM

  • peter hall May 11, 2010

    Are the teeth are missing, the solenoid engaging?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I just changed one of my own it is the starter 1 way clutch honda has a recall on them call your local dealer with your vin to see if you are covered i believe they are from 04-07. a big problem for honda i guess. also there is no mendix drive as it has a 1 way clutch. dont get sucked into buying the kit eather just buy the clutch itself it ran me $77 canadian. hope this helps!!!

Posted on Mar 03, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 376 Answers

The bendix on the starter went bad and you will nee to replace the starter or have it rebuilt.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I turn the key my engine just clicks and does not turn over , if I turn the engine past the compression stroke I can get it running and it runs fine put I have to turcompression every time t


Doesn't sound like your battery has enough juice , cranking amps to get the flywheel going. Test your battery and starter. If you have a multimeter this will help...

Oct 16, 2015 | John Deere Garden

1 Answer

1997 Buick Park Ave won't start


Assuming the engine is in sound running condition, if the engine is not turning over at all when you hit the starter then the problem is with the starter motor or the starter motor solenoid. That is assuming there is no problem with the power supply to the starter motor unit such as a failed starter motor relay or a wiring issue.

Feb 26, 2015 | 1997 Buick Park Avenue

2 Answers

99 dodge ram 3500 diesel starter will not shut off with key, turn off key and starter moter stays engaged and engine has run on. had to disconnect both batteries. gently tapped starter selenoid with hammer...


it sounds like the starter solenoid contacts are not separating to stop the starter from turning.the run on is due to the starter not stopping causing the motor to continue to spin.replace the starter unit as it will have damage due to being engaged with the motor running,also have the flywheel inspected to make sure the teeth are not damaged on it.

Apr 12, 2011 | 1995 Dodge Ram 3500

1 Answer

Starter motors good but wont turn over my1982 lincoln continental


When you say the starter motor runs, do you mean it runs fast but does not turn the engine, in that case it may be something to do with starter not engaging the ring gear.

If when the starter runs it turns the engine slowly then it could be starter is not getting enough power.

The reasons for starter motor not getting enough power can be, a bad battery, loose battery connector, stiff engine or a bad starter solenoid.
To check a bad battery, turn your head lights on and when you try to crank the engine, if the light go dim, you have a bad battery or a bad battery connection. If the lights are not affected you may have a stiff engine.
.

Mar 02, 2010 | 1994 Chevrolet Camaro

1 Answer

The dna 125 wont start


Hi and welcome to FixYa,

Initially, is there an alarm/immobilizer? If yes is it active/enabled?

Offhand, by "...wont start..." do you mean starter motor will not spin or engine turns but will not fire?

Starter motor will not turn:
  • press start button, check for +12 on green/black wire from starter switch to starter relay;
  • if there is, is there a clicking sound?
  • if there is a clicking sound, short temporarily the 2 big terminals of the starter relay;
  • if starter motor turns, starter relay faulty;
  • if not, starter motor needs looking into particularly the carbon brushes and the commutator segments.

Starter motor turns but no spark:
  • check/replace sparkplug;
  • check pulsating voltage on green/white wire going to ignition coil coming from the ignition control unit;
  • check pulsating low AC voltage on green wire going to ignition control unit coming from the pulse generator coil;
  • check presence of IGN +12 leading to the ignition control unit.

Starter motor turns, there is spark but motor will not run:
  • check automatic choke (blue & white/black wires);
  • check fuel quality and quantity delivered to combustion chamber (check sparkplug if wet).

Good luck and thank you for asking FixYa.

Dec 19, 2009 | Gilera Runner VX 125 Motorcycles

1 Answer

2000 ford focus no power to starter moter i can run wire from ignitionswitch and ground starter and turn key and starter runs but wnenstarter is put back in car switch will not turn starter over i...


The mechanic should check on the wires and fuse going to the starter motor and the spare parts . since when you test the starter motor and seems no problem to it ,it means that the problem is in the other spare parts connected to the starter motor .check the alternator if it is good and functioning well. The solenoid you also have to check it to be sure because it is very much connected to the starter motor .those spare parts that are worn out or destroyed , you should replace them .

Aug 28, 2009 | 2000 Ford Focus

1 Answer

Husqvarna Z6127 won't start after running 30 minutes.


If the starter motor is spinning, the problem is probably the starter motor solenoid. It is basicly an electric piston mounted on the starter that engages the starter motor pinion gear to the flywheel.

Jul 31, 2009 | Husqvarna Zero Turn Mower Z5426

1 Answer

1990 300zx solenoid/starter relay


I would go for the starter motor personally first, as thats the part that cranks the engine over :)

that gets power, then it starts turning the flywheel, the starter motor also keeps the engine running inbetween the engines power strokes while its running.

Go for the starter relay & the starter motor :)

Thanks.

Apr 10, 2009 | 1990 Nissan 300ZX

2 Answers

Peugeot 206 starter motor not turning


put your voltmeter on the little cable that goes to the starter and check the volts there will turning the key to the start position if you have power ...yes its the starter...if you dont then it could be the starter relay

Dec 30, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
2005 Honda CRF 250 X Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...