Question about 2006 Harley Davidson XL 1200 C Sportster Custom

1 Answer

Just put drag bars on and now turn signals horn and brake light dont work when i turn the key on turn signals will flash automatically for about 5 seconds

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 379 Answers

Is there an alarm on the bike? Possibly it needs reset. If not, then check for pinched/disconnected wires

Posted on Oct 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to set & cancel theft deterrent system or how to set & cancel security...


Theft deterrent system (on some models)

Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

• Any door or hood is forcibly opened.
• The batter terminal is disconnected and then reconnected
• The system control is disconnected and then reconnected.
• Abnormal impact is detected when the impact sensor function is on.

The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

Setting the system

You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

1. Turn the ignition key to "LOCK" and remove it.
2. Have all passengers get out of the vehicle
3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

Once the system is set, you cannot start the engine until you cancel the system.

The system will not be set in the following cases.

• When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
• When the hood is open; close the hood securely.

Canceling the Impact Sensor

The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

• When parked in the noisy area
• The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
• When transporting by a car carrier or ferry.

To cancel the impact sensor;

1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

The impact sensor is deactivated as long as the system remained armed.

Canceling the system

The system will be cancelled by the following two ways:

• Turn the ignition key from "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch

If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

When the system is set

Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

• Unlocking any door without using wireless control
• Any door or hood is forcibly opened.
• The battery terminal is disconnected and then reconnected.
• The system control assembly is disconnected and then reconnected
• Abnormal impact is detected when the impact sensor function is on.

Reactivating the alarm;

Once set, the system automatically resets the alarm after the alarm stops.

The alarm will activate again under the same circumstances described in "Activating the system".

Stopping the Alarm

The alarm will be stopped by the following two ways;

• Turn the ignition key from the "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch.

The system can be cancelled by these ways at the same time.

If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

Testing the system

1. Set the system
2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
3. Open the door, and an alarm will sound.
4. Stop the alarm by pushing the unlock (cancel) switch.
5. Repeat this operation for the front passenger's door.

Good luck.

on Nov 08, 2010 | Toyota Pickup Cars & Trucks

1 Answer

Horn tail light and blinkers wont work


Check the fuses ...sounds like you may have fried one or two, Also that is a very tight fit where the brake light switch is....make sure you are not grounding out in the bars where the switch fits in the groove

Jan 11, 2013 | Harley Davidson XL Sportster 883...

1 Answer

Pride mobility scooter celebrity x flashing 5 times not working


Hi remove key put freewheel lever into drive & replace key .turn on...,... good luck.,

Nov 04, 2012 | Pride Celebrity X 3-Wheel Electric Scooter...

1 Answer

Turn signals,horn and brake lights dont work harley dyna


Hi Anonymous, always check fuses and bulbs first, you could have a faulty turn signal module or a bad turn signal button/switch, remove it from the switch housing and check for continuity, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all wires are not worn or pinched and connector pins are not corroded, broken, or loose.
Check the wire connections to the horn making sure they are clean and tight, there is power going to it and the ground wire is securely fastened. Then look behind the horn body for a small set screw sometimes with a jam nut. This screw puts tension on the horn diaphram to vibrate alot or vibrate a little. Have someone hold in the horn button while you adjust the screw in or out as necessary. Then check the connection at the rear fender wiring harness, inspect for corroded, broken or loose pins. Use a dab of dielectric grease and repair as necessary. Check your brake relay if you have one , check your brake light switches for continuity, some models rear turn signals were single filament bulbs only, no running light. If all else fails get out your test light and start tracking the power wire from the harness connection. For a free wiring diagram please visit the website below and good luck:
Harley Davidson Wiring Diagrams and Schematics

Mar 27, 2012 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Got a 2000 hayabusa, instrument panel back brake light and turn signals out, replaced 15amp fuse, rode the bike next morning same again?


Well...in general....the turn signals brake lights and horn and instrument lights are typically on the Signal fuse on most bikes.
So....any recently added accessories to the circuit?
If not...start at the signal and brake light sockets...inspect wiring around the socket and the sockets themselves looking for a possible short.
Then check wiring to the back under seat for chafing pinching etc
Inspect the wiring aroiund the steering head in case a pinch has occured causing a short on bar rotation.
If all looks okay...inspect the horns....not sure on your Busa, but many horns use 2 wires and ground through the horn button....so the horn needs to be insulated on its mount so as it may be wired hot and can short.

Apr 01, 2011 | 2000 Suzuki GSX 1300 R Hayabusa

1 Answer

I am trying to re install tail lights/brake light and turn signals on a 1978 gl1000 honda goldwing and i cant get the turn signals/brake light to work. the tail light works , no problem. i have done...


Check the contact plates inside the bulb sockets. On old sockets sometimes one of the contacts will melt or sink into the plate causing half the tail light to not work. Many times I have taken the plate/with wires out of a different light and repaired a socket. I have also changed turn signals from front to back by switching the contact plates. Horns are notorious for not working. Check it by hooking power directly to it. If you have done a thorough plug and unplug of all the wire connections, your next option is to carefully take apart the handle bar switch and clean the contacts. If you ave already tried another flasher unit (12 volt trailer flashers are cheap) be sure to replace the old fuses with new ones. Old fuses sometimes separate internally and no longer work correctly.Also do not be afraid of taking the ignition contact base off and cleaning that. If you take off the ignition switch, put the key to the on position, push the three tabs, you can pull off the electrical contact base , carefully disassemble it, and clean it. Good Luck

Feb 26, 2011 | 1978 Honda GL 1000 (K3)

1 Answer

Lights wont work on 2004 softail


i believe you have something hooked up wrong like hazards and all other lights mixed up or backwards should i say

Apr 03, 2010 | 2000 Harley Davidson FLSTC Heritage...

Not finding what you are looking for?
2006 Harley Davidson XL 1200 C Sportster Custom Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...