Question about 1994 Honda CBR 600 F(2)R

1 Answer

How do i change the collant in my 1994 cbr 600 f2 my coolent is all souping right now

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

Remove seat, turn fuel selector off, pull off fuel line to fuel filter, remove tank, you should see radiator cap now... turn loose not off, just incase still has pressure... now follow lower radiator hose and it will lead to the water pump and on the water pump there is a little screw on the bottom sticking out of the side...thats the drain for the system ...now place something to catch a lot of fluid and when you take the drain bolt out it'll start coming out but as soon as you take off the radiator cap it will pour out fast so be prepared. that bolt i think has a washer on it to, don't lose it...once drained, put drain bolt back firmly dont torque stand the bike up on a wheel stand and now slowly ever so slowly start to pour your coolant: coolaid, waterwetter, whatever, but not tap water. now jiggle the bike around once in awhile to get trapped air out of it it, may look full but you might have to get a stand or box about waist high set your tank on it and hook up the fuel...be careful dont let the tank fall, get someone to hold it for you...start the bike let it run for a minute shut down add more coolant, start it again run it and jiggle the bike watch to see if water bubbles are still coming out now rap the throttle up to about 4000rpm once or twice check the level again turn bike off let it set for a minute again, does the level stay now right up to the neck.... well then put on the cap and everything back on.. now when you have everything back on take for a short ride and then check your coolant reservoir, dont overfill it just up to the warm mark and you should now check the drain bolt for leaks...all done.
Can i get a very helpful reply....thanks

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1993 cbr 600 is leaking gas in the muffler


Hi, Douglas "DO NOT!!!!!"start-run-drive your bike for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
CBR 600 F2 1994 Fuel overflow Honda Motorcycles FireBlades org
2001 CBR 600 F4i Leaking gas from exhaust CBR Forum Enthusiast forums for...
Honda CBR600F4I 2001 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F4i Owner Manual

Feb 14, 2017 | 1989 Honda CBR 600 F Hurricane

1 Answer

1994 Honda CBR 600 F2 fork oil capacity


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Fork oil level and Front axel bolt size CBR Forum Enthusiast forums for...
F2 Fork Oil Capacity
Honda CBR600F4I 2001 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F4i Owner Manual

Jul 06, 2014 | 1994 Honda CBR 600 F(2)R

1 Answer

1993 Honda CBR 600 F oil change


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda CBR F2 Oil Change Honda Tech Honda Forum Discussion
Oil change CBR600F2 92
1991 1994 Honda CBR600F2 Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

May 09, 2014 | 1993 Honda CBR 600 F(2)P

1 Answer

93 Honda CBR 600 F2 Won't start just backfires


carb needs cleanin or rebuild--getta clymermanual for procedure

Dec 11, 2012 | Motorcycles

1 Answer

My cbr 600 f2 1993 had been sitting for a long time


Sounds like the carbs were not properly cleaned or set up. Choke should cause the cold start rpms to be higher than what you are experiencing. Application of choke to a warmed up engine will usually cause the engine to stall.

Jun 28, 2010 | 1994 Honda CBR 600 F(2)R

1 Answer

How do you take off the seat to a 1994 honda cbr 600 f2


well if it anything like my f1 you take off both rear side covers and then there are to bolts one on each side to remove and then pull back and up and that should do it. Can i get some feedback if this helped thanks

Apr 03, 2010 | 1991 Honda CBR 600 F(2)M

1 Answer

How do i properly fill the coolant on a 94 honda CBR rr F2


with a cold engine, remove the rad cap, top up with a 50/50 mix of water and coolant untill its at the bottom of the filler neck..

Oct 24, 2009 | 1994 Honda CBR 600 F(2)R

2 Answers

I need wiring schematic


I bought a cbr 600 , but bike came with the wirers not connected. Rectafire, was also not connected? need diagram or help really badly!!!!

Jun 26, 2009 | 1994 Honda CBR 600 F(2)R

1 Answer

Knocking or clicking in the top end of my 1994 cbr 600


you could have a loose valve that will cause it too click like that..

Dec 05, 2008 | 1994 Honda CBR 600 F(2)R

1 Answer

Governor


F1, F2, F3 and perhaps all carbuerated motorcycles do not have speed limiters. Even newer fuel injected 600cc and most 1000cc motorcycles will not have speed limiters. Usual cases of governors apply to sportbikes exceeding 1 liter like the ZX12, ZX14 and the Hyabusa

Nov 10, 2008 | 1991 Honda CBR 600 F(2)M

Not finding what you are looking for?
1994 Honda CBR 600 F(2)R Logo

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...