Question about 2003 Triumph Daytona 600

1 Answer

Thanks to 'Double Clutch', more info

Thanks to 'Double Clutch' re occasional knock after new tyre fitted.Have checked 'crush rubbers' all ok, knock only happens when using throttle, if clutch is pulled in and coast- no problems. I've put on paddoch stand and started on tickover- no problems, rev up- no problems, put into gear- no problems, only when I use throttle in gear and simulate driving off is there a knocking sound which seems to be comming from the front chain cog (although the sound could be transfering from the back) I was wondering if there is a spacer missing so that when throttling, it is pulling the wheel out of line and causing something to knock. can't find diagram to show me what should go where.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 376 Answers

If the rear tire is bolted down and torqued properly then the chain should not move the rear tire. Try taking the chain off the bike completly and if you can remove the sprocket cover and run the bike and maybe see what going on. Check the chain links while it is off to see if they move freely.

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mercedes clk 230 komp has an issue withe the front passenger wheel. when pulling away on full lock right, its like the tyre is running on flat and it starts to knock. everything seems ok wheel bearing...


wheel bearings should have no play at all The correct adjustment is no preload -no end float with the adjustment nut moved slightly to preload to fit the pin.
It is happening on full lock ,check the full lock stop as the tyre may be hitting on the suspension or inner guard.

Feb 18, 2015 | 2001 Mercedes-Benz CLK-Class

1 Answer

I have a Citroen xsara piccaso 1.6hdi and have a vibration on the n/s front any ideas


jack the front up and spin the wheel ,lay you pound to a penny the front tyre is deformed ,i blame the garage that checked the tracking and balancing for not checking the tyre first ,but as they only pay peanuts then no doubt it was only a semi skilled grease monkey you got to it for you ,change the wheels front for the rear and then it will be ok

Apr 13, 2013 | Citroen Cars & Trucks

1 Answer

Front Tyre feathering on Silverwing 600


The OEM Dunlop, IRC,Bridgestone, or quality major brand tire should be adequate. I have always had the best life and wear out of my tires by running higher pressure (usually 35-36 pounds ). The ride is harder but it reduces cupping on the tire sides increasing usable tire life.

May 23, 2010 | 2005 Honda Silverwing 600

1 Answer

Gs750 1978 front end juddering


most tyres would have a weight on the rims if they were balanced its very rear they dont, but check the head bearings first,,,but my money is on that new tyer being out of balance

Mar 14, 2010 | 1978 Suzuki GS 750 E

1 Answer

2003 X5 - TyreIndicatior Inactive shows on VDU.


Just double check the tyre pressure as per specification and reset the the Tyre Pressure Monitor system. Also make sure no Tyre punture on it.

Mar 05, 2010 | 2004 BMW 5 Series

1 Answer

Where can I find an exploded diagram of the rear spindle of my daytona 600, to show me what spacers go where. After having a rear tyre replaced, I now have a knocking sound, but only when using throttle,...


If it goes away when you pull the clutch in then I would think it something to do with the engine but i could be wrong there. Can you put the bike on a jack and put it in gear and maybe find out what going on. Let me know what you find out. You got me wondering.

Oct 03, 2009 | 2003 Triumph Daytona 600

1 Answer

What tyre for yz 125 2001


Hey Ryan! Google " motorcycle tires " and you should be able to find the 120/80/19 tires. Call the dealer for additional sizes that will fit.

Please rate this solution. Thanks!

P.S. > Did you ever get the clutch fixed?

Apr 29, 2009 | 2003 Yamaha YZ 125

1 Answer

Ttr 125 had bad tire


check the tyre for a nail or whatever punctured the first tube, when you remove the tube keep it in the same position as it was when it was in the tyre, blow it up and check the hole then check the corresponding place in the tyre for the nail

If the new hole is a small split you may have damaged it during fitting


be careful not to pinch the new tube when fitting

Apr 08, 2009 | 2003 Yamaha XVS 125 Dragster

Not finding what you are looking for?
2003 Triumph Daytona 600 Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...