Question about 2005 Suzuki Boulevard C90

2 Answers

Changing front brake pads 2006 c90t - 2005 Suzuki Boulevard C90

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

If its the same as a c50 05 then there are two bolts that have to be removed. the brake unit is then pulled back in the direction of the wheel.
When it is clear the two pads can be slid out. The pistons can be pushed back by hand.
When the brake unit bolts were removed there might be a templet under the bolts, make wsure and replace it when replacing the bolts.when putting the brake unit back togeather again The pads are secured by a very small metal pin.This pin can be found holding one end of the pads in. A very small coiter pin is inserted after the pin has been put through the end of the pads. There is a very small hole in this metal pin.

Posted on Nov 02, 2009

  • Colin Gilpin Nov 08, 2009

    Saying to consult the service book or going to the library and look in the referance section every time is not helping anybody.
    callers want a simple and easy answer to a problem.


×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 302 Answers

A service manual is a valuable tool with an aging bike. I suggest the dealer/mfr. or Clymer books. In the meantime, go to the library reference section...646 stacks should have what you need.

Posted on Oct 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed front brake pads on 2006 Hyundai and no brakes !


Bleed the brakes starting at the longest line first working through to the shortest line

Apr 06, 2013 | 2006 Hyundai Accent

1 Answer

How to change front brake pads on a 2006 yamaha roadliner


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://meiguohosting.com/How-to-Replace-2006-Yamaha-Roadliner-Brake-Pads
How to Change Front Motorcycle Brake Pads from SportbikeTrackGear com
Yamaha XV19SX Service Manual
OEM parts for Yamaha
Yamaha ROADLINER XV19SW Owner Manual

May 15, 2012 | 2006 Yamaha Roadliner

1 Answer

Install front brake pads 2006 harley dyna wide glide


Hi Anonymous, for more information on your question please visit the websites below and good luck:
How to Change the Front Brake Pads on Harley Davidson

Apr 09, 2012 | 2006 Harley Davidson FXDWGI Dyna Wide...

1 Answer

Front brakes make noise


front brake noise,front brake pads worn out.check front brake pads if they look real thin need changing.

Nov 13, 2011 | 2006 Cadillac DTS

1 Answer

How do you change front brake pads on an Audi A6 2006


How to change front brake pads & rotors (brake disc) on 2006 Audi A6:

Atention!!!
Don't disconnect any brake line from caliper!
Don't disconnect any ABS sensor!
For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:

1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Remove brake carrier from wheel bearing housing (two ribbed bolts). 125 Nm
7. Remove brake disc from wheel hub.
8. Install brake carrier on wheel bearing housing. Tightening torque for two ribbed bolts = 125 Nm.
9. Check up the brake fluid level on the reservor, and emptying if neccessary!
10. Push piston back into brake caliper housing.
11. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
12. Install outer brake pad into brake carrier.
13. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
14. Install both caps.
15. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!

Nov 26, 2010 | 2006 Audi A6

1 Answer

How do I change the front brake discs and brake pads on a 2006 Chevy HHR LS model 2.2L 4 Cyl.?


Changing the pads is very straight forward and is no different from any other disc brake equipped vehicle. However, if you have never changed disc brakes before I would NOT recommend you do so on you HHR without either a shop or technical manual. Changing the rotors is very easy - they slide off the mounting studs once the disc calipers are removed.

May 11, 2010 | 2006 Chevrolet HHR

3 Answers

Changing the front brake pads on a 2006 Pontiac Montana SV6


no that is only the older rear calipers on gm and others. the fronts do not have that style caliper and sound like the calipers are frozen and may be way your changing the pads. try opening the bleeder screw and then compressing them if they go then you need need brake hoses and if not you need calipers. god luck man

Dec 13, 2009 | 2005 Pontiac Montana SV6

1 Answer

Change Front Brake pads


0ecf5e9.jpg
882e49e.jpg

09c5478.jpg

188c378.jpg

4da2f83.jpg
(10) Install master cylinder fluid reservoir cap.



3f13df8.jpg
2660f7e.jpg
ea58bc2.jpg

0c22dbe.jpg

Hope this helps...I know it's extremely difficult to find manuals for these cars. These instructions are straight out of the factory service manual.

Nov 22, 2009 | 2006 Chrysler Pacifica

1 Answer

I need to change front brake pads


You have two bolts to remove the caliper (it will still be attached to the flex hose). then use a C clamp to compress the caliper piston (one side on outside brake pad the other end on the back of the caliper). Inspect other components, replace pads and reinstall. I would highly recommend replacing rotors as well or at least having them turned. Its a pretty easy job if you have done similar jobs in the past.

Sep 04, 2009 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2005 Suzuki Boulevard C90 Logo

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...