Question about 2006 Derbi Atlantis City 100

2 Answers

Piaggio nrg mc3 air carbrutor idle screw and air mixture settings

I need the carbrutor idle screw and air mixture settings for a piaggio nrg mc3 air 2001. any help would be great thanks

Posted by on

  • Tony Crow Mar 20, 2012

    all mixture screws should be screwed in fully then out one and a half turns , then go by adjustment when revving , in out , idle screw adjust till just above cutting out speed ,

  • Anonymous Mar 19, 2014

    I'm looking for the factory setting for the idle mixture

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 302 Answers

A service manual is a valuable tool with an aging bike. I suggest the dealer/mfr. or Clymer books. In the meantime, go to the library reference section...646 stacks should have what you need.

Posted on Oct 13, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need help on how to alter the screw for the fuel settings on my piaggio

Posted on Mar 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I put a water cooled piaggio power 50cc carb on a piaggio nrg 50cc air cooled bike?.


Hi, Noel after careful deliberation 4 out 5 Piaggio Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm. For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.49ccscoot.com/manuals/Piaggio-NRG-Power-Purejet_Shop_Manual.pdf
PIAGGIO NRG POWER PUREJET User Manual
https://www.oemmotorparts.com/oem2.asp?M=piaggio

Nov 14, 2016 | Piaggio Motorcycles

1 Answer

Hi iv got a piaggio Vespa nrg dt 49cc it second hand but was wondering if the front side lights are meant to be on all the time or is it a fault as checked the lights and the switch and they all work


Hi, Paul they are probably running lights motorcycle companies have running lights come on with the ignition switch for decades for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.piaggio.fi/files/piaggio/ohjekirjat/Piaggio_NRG_Power_DD_DT_eng.pdf
PIAGGIO NRG Power DT Workshop Manual

May 14, 2016 | Piaggio Motorcycles

1 Answer

Idle set 2004 fxdwg


Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease idle. There is also an air/fuel mixture screw inside a carb body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning screw clockwise will lean out mixture and lower idle, turning screw counter clockwise will richen mixture and raise idle. You need to balance the two adjusting screws to obtain an idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved, if you see black smoke coming out of exhaust you have gone to far and need to turn screw back in 1/8 turn at a time, final adjustment should be made with the engine at normal operating temperature. Good luck and hace nice day.

Feb 26, 2012 | Harley Davidson FXDWG - FXDWGI Dyna Wide...

1 Answer

My piaggio nrg mc3 just keeps turning over and will not start


No fuel, or you lost spark. Check wire connections,especially the plug, cdi, and coil wire. Often the kill switch is off, or the kick stand safety switch is on.

Nov 18, 2009 | RTO 50cc Moped Scooter

1 Answer

My piaggio nrg mc3 running problem


hi buddy on the carb will be a screw this is the mixture screw turn this all the way in and unscrew it 1 1/2 turns out i will send a pic when i get home from work

Sep 24, 2009 | 2003 Aprilia RS 125

2 Answers

Hi. i have a piaggio nrg mc3 ac on a 51 plate, been getting 45-50 on the flat and good up hills. parked it up and went away for the weekend and know it is really slow, have changed plug and checked the...


Check air filter and exhaust. Is it possible that someone tampered with the bike?

also maybe sticky drive belt, not acting on the variactors properly.

Sep 20, 2009 | 2005 Gilera Runner VX 125

1 Answer

Piaggio nrg mc3 will not start


check the timing its probally off by some degree. its located on the other side of the bike ( opposite side of the shifter) in the maintance manual it will give you the timing defree needed.

Jul 15, 2009 | 2003 Aprilia RS 125

1 Answer

I need a manual for a homelite gas hedge trimmer HT-19 I need the factory settings for the carb. bottom out screw turn out 1 1/4 turn? Have to hold throttle wide open to run.


Hello cosorio70:

You can Get a Manual from the Following Site Addy;
https://register.homelite.com/contact_us/new and Fill Out the Required Information. Remember to have the UT Number if this Unit has One.
>>The Following is the Instruction File for Setting the Air Mixture Screws. Any Input is Appreciated. The Procedure is the Same for 1 or 2 Mixture Screws, Just Use the Instruction File and Skip Over the Section with the Missing Mixture Screw ( Usually the H Mixture Screw).
>>Now Setting the Air Mixture Screws:
>>****Turn the Idle Air (L) and Main Air (H) Mixture Screws In Until SNUG **Do Not Jam** Then Reverse Both Screws 1 1/2 Turns. Set the Throttle Full Open, Start the Engine.
>>Turn the Main Air (H) Mixture Screw Clockwise Until Proper Revs are Obtained. **Carefully Use your Finger and Move the Governor Arm to Rev the Engine (on Chainsaws and Trimmers Use the Trigger to Rev the Engine) Until you Reach Max RPMs (on Chainsaws and Trimmers, the RPMs are Not Set to MAX. Set to Max and then Reverse the Setting Screw 1/4 or 1/2 Turn. If the H Mixture Screw is Set too High; the Engine will be Starved for the Oil in the Gas and Damage the Piston and Jug/Cylinder) and the Engine is Running Proper at Full Throttle Up a Grade and for Chainsaws and Trimmers they Do Not Bog DOwn Under a Load. Occasionally you May have to Turn this Counter Clockwise to Achieve the Proper Revs.**
>>Now Allow the Engine to Idle. Set the Engine Idle Screw (Not Idle Air) so the Engine will Stay Running if Required.
>>Now Set the Idle Air (L) Mixture Screw so there is No Hesitation when Rapidly Throttling from Idle to Full Throttle. Reset the Engine Idle if Required.****
Please, Do Not Hesitate, If I Missed Something or you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance.
Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.

Good Luck

Respectfully

jbridger (John)

May 14, 2009 | Homelite Garden

2 Answers

Carb adgustment? initsial setings. for a kowasaki fc290v on a lil john deere rider?


Hello raptorboyz:

>>The Following is the Instruction File for Setting the Air Mixture Screws. Any Input is Appreciated. The Procedure is the Same for 1 or 2 Mixture Screws, Just Use the Instruction File and Skip Over the Section with the Missing Mixture Screw ( Usually the H Mixture Screw).
>>Now Setting the Air Mixture Screws:
>>****Turn the Idle Air (L) and Main Air (H) Mixture Screws In Until SNUG **Do Not Jam** Then Reverse Both Screws 1 1/2 Turns. Set the Throttle Full Open, Start the Engine.
>>Turn the Main Air (H) Mixture Screw Clockwise Until Proper Revs are Obtained. **Carefully Use your Finger and Move the Governor Arm to Rev the Engine (on Chainsaws and Trimmers Use the Trigger to Rev the Engine) Until you Reach Max RPMs (on Chainsaws and Trimmers, the RPMs are Not Set to MAX. Set to Max and then Reverse the Setting Screw 1/4 or 1/2 Turn. If the H Mixture Screw is Set too High; the Engine will be Starved for the Oil in the Gas and Damage the Piston and Jug/Cylinder) and the Engine is Running Proper at Full Throttle Up a Grade. Occasionally you May have to Turn this Counter Clockwise to Achieve the Proper Revs.**
>>Now Allow the Engine to Idle. Set the Engine Idle Screw (Not Idle Air) so the Engine will Stay Running if Required.
>>Now Set the Idle Air (L) Mixture Screw so there is No Hesitation when Rapidly Throttling from Idle to Full Throttle. Reset the Engine Idle if Required.****
Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance.
Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.

Good Luck

Respectfully

jbridger (John)

May 11, 2009 | Garden

Not finding what you are looking for?
2006 Derbi Atlantis City 100 Logo

2,093 people viewed this question

Ask a Question

Usually answered in minutes!

Top Derbi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Derbi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...