Question about 2005 Husqvarna TE 510

1 Answer

CHANGE CLUTCH SEALS. I'm chasing a service manual as i wish to change out my clutch seals. I have blead the system 3 times and it has lost pressure in roughly a week leading me to belive that it needs a seal kit.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Husqvarna Master
  • 3,433 Answers

It would be best to replace both rhe master and slave ctlinders. They are elatively inexpensive opposed to your time annd wasted flui and tim. When you bleed the system open the bleeder at the slave cylinder and let the fluid drip untill it is steady and air free. Leave the cover loose on the master and keep it full. Do not pump the clutch pedal to bleed rhe system. The new cups can be damaged. in bothcylinders. Good Luck _Ned_

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When changing clutch what seals or gaskets do I need to replace


Input shaft seal on gearbox,rear main seal on motor.

Nov 07, 2014 | Cars & Trucks

1 Answer

Won;t start while clutch pressed but will push start


The clutch master cylinder must have gone out, the seals in it have failed. The clutch master cylinder (next to the brake master cylinder) gives you hydraulic pressure so the clutch pedal can operate the clutch.
You can buy a new clutch master, a rebuilt unit, or yours can be rebuilt with new seals. Save time and money and buy a rebuilt or remanufactured unit. Once installed, you bleed the system down at the clutch slave cylinder, mounted on the transaxle.

Jul 15, 2013 | 1989 Honda Prelude

2 Answers

Hydraulic clutch slave cylinder


it is possible because when you are in panic mode you could have developed enough strength to blow the piston seals in the clutch master cylinder ( the pressure seal at the front of the piston will fail and allow the oil back into the reservoir )
being a 2005 model and presumably nothing done to the clutch system any extra pressure on old seals will cause them to fail
That is where I would start to fault find

Mar 25, 2017 | 2005 Volvo XC90

2 Answers

I lost all pressure in my clutch so I replaced the clutch/slave cylinder etc on my 2001 saturn wagon. worked fine for a 2 months. Now all of a sudden I have some pressure in the clutch but it seems out of...


Two possibilties. If you haven't yet replaced the clutch master cylinder there might not be enough pressure to fully engage the clutch. If the master cylinder is full of fluid and has been operating properly until now it could be that you only need to adjust the linkage at the slave cylinder to give a little more throw to the pressure plate. Always try the easiest things first. Good Luck!

Mar 13, 2011 | 2001 Saturn SC

1 Answer

Trans slipping


CHECK TRANSMISSION FLUID LEVEL.MAKE SURE FLUID LEVEL NOT LOW.IF FLUID LEVEL OKAY BUT TRANSMISSION FLUID LOOK DARK HAS BURNT SMELL CHANGE TRANSMISSION FILTER + FLUID.IF FLUID AND FILTER HAS BEEN CHANGED YOU HAVE THE RIGHT AMOUNT FLUID IN TRANSMISSION AND MANUAL SHIFT LINKAGES PROPER ADJUSTED.CHECK TRANSMISSION FUSE AND SCAN FOR PRESSURE CONTROL SOLENOID VALVE MALFUNCTION FAULT.IF ALL IS GOOD HAVE TRANSMISSION OIL PUMP PRESSURE TEST.YOUR PUMP COULD BE FAULTY OR YOU HAVE WORN LOW ROLLER CLUTCH AND WORN FORWARD CLUTCH PLATES AND LEAKING FORWARD CLUTCH PISTON SEALS.

Jul 10, 2010 | 1999 Oldsmobile Alero

2 Answers

Clutch pedal loses pressure. I keep adding brake


hi you have an obvius leak in the hydraulic system either the master cylinder seals have warn or the slave cylinder has warn seals you will have to check which it is first as either are ok for the average diy guy who knows how to hold a wrench so to speake and it will either take 2 people to blead them through or you will have to purchase a bleed system...( or as i used to do it a long bit of hose , glass jar half filled with fluid make sure hose is transparent so you can see the air bleading out) hope this helps

Feb 13, 2010 | 2002 Ford Ranger Regular Cab

1 Answer

Difficult shifting from first to second and second to third


clutch may be worn,may need replacing ,but first check system for fluid leak, cneck fluid level and condition, if black in colour then you have worn seals, you can replace seals but i recomend replacing components with new ones becouse the bore of master and slave cylinder can also wear causing seals to leak, note: when servicing clutch system you change clutch and preasure plate and fly wheel if out of spect.

Oct 07, 2009 | 2000 Nissan Frontier

1 Answer

My clutch lost all pressure right after 100K mi


Like just about everything, it works till it dosen't. Things wear out...when the parts wear enough they no longer work Likely the internal seals in the master have worn enough to permit fluid to go around them instead of creating pressure to operate the clutch slave. when this happens, air can enter the system past the seals, which is why bleeding helped temporarily. The master is not difficult to change and should be bled after installing in order to get any air out of the line. (works exactly like your brakes but operates the clutch instead of a wheel cyl or caliper)

Jun 08, 2009 | 2004 Chevrolet Cavalier

1 Answer

Clutch fluid is leaking inside of the car 240sx


You need to rebuild the seals in the cluth master cylinder. The seal around the pedal shaft that actuates the clutch is leaking fluid past the seal and onto the shaft connected to the pedal, inside the cabin. 
A good parts store should be able to get you a seal rebuild kit, or remove the cylinder and bring it to a clutch shop or Nissan dealer and have them rebuild it for you. This is cheaper than dropping the car off and having them do all of the work. 
Dismantling the master cylinder, replacing the seals, filling the system with fresh fluid and bleeding it should solve your problem. Be sure to replace all of the seals at one time, and don't be tempted to only replace the one that is leaking at the moment. They should all be the same age to last without further leaking. Otherwise you'll be chasing a series of problems with your clutch as the other old seals fail over time.
Hope this helps.

Dec 19, 2008 | 1990 Nissan 300ZX

2 Answers

A/c promblem


No, i think you ahould check the thermostat and replae it.

Jun 18, 2008 | 1990 Chevrolet Cavalier

Not finding what you are looking for?
2005 Husqvarna TE 510 Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

venugopal durairajan

Level 3 Expert

464 Answers

choprboz5

Level 2 Expert

196 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...