Question about 1984 Honda XL 125 R

1 Answer

This is a 3 wheeler 125 m honda one cyl runs

This is a 1984 3 wheeler 125 m Honda one cyl runs perfect at idle and off idle it wont go bogs out and if I gas it it will die and it always restarts at idle then it will go and run good again and run ok at high rpm until you slow down and some times it works perfect all the time it acts like its running out of gas the tank and lines filter and carb is clean spotless took it apart 3 times what is it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Sounds like a loose piece of crud in the main jet. Have you had the jet and tube above it out? It could also be a spark problem. See if you have spark when it tries to die ( put a nail in the plug boot and get it sparking 1/4" or so to the plug at idle then rev it up, it should continue jumping. I think that bike will also have mechanical spark advance on the rotor on the end of the cam. If the springs are loose on that the spark timing will be all over the map and can make it run intermittantly.
Jordan

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the difference in a 83 and an84 atc 200es?


Hi, Jason I would give your local dealer a call and talk to a salesman for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
3 WHeeLeR WoRLD 1984 Honda Spec PaGe
1984 honda atc200es pictures Google Search
3 WHeeLeR WoRLD 1983 Honda Spec PaGe
1983 honda atc200es pictures Google Search

Mar 28, 2016 | Motorcycles

1 Answer

How does the spring and filter go back after changing the oil on a 1984 honda 200x 3 wheeler


Hi Joey.

Google is your friend & so is www.bikebandit.com

Next time lay out the items as they come out !

1984 Honda ATC200ES CRANKCASE Parts

Best wishes
Fuzz

Jul 13, 2014 | Motorcycles

2 Answers

1984 honda vt500c cuting out


How about a fuel filter? does your bike have one?

Mar 31, 2012 | Honda VT 500 C Shadow Motorcycles

1 Answer

My honda xlr bogs out when i throttle bike


Have your carburator adjusted/calibrated/cleaned by a qualified service personnel.

Feb 23, 2012 | 1997 Honda XLR 125 R

1 Answer

My Z1900 idles ok but when I twist the throddle it


if you are sure the carbs are ok then check the linkage for wear, i had one do the same thing cause the carbs were not in sync and one cyl is fighting the other

May 04, 2010 | 1984 Honda VT 500 C Shadow

1 Answer

I have a 2002 CR 125. Runs great but has black fluid that comes out of tail pipe after running. I feel it is running too rich. What should the air/ fuel mixture screw be set at?


The mixture screw is used to get the transition from idle to throttle up smooth, and not to bog.
Sounds like your jetting is to rich, or too big. Read your plug as it's probably black. Then go smaller on your pilot jet, run it and read it again. Make sure you run 32:1 mix, and jet the bike to match this.

Dec 10, 2009 | 2002 Honda CR 125 R

1 Answer

Honda cr 125 1997 wont idle


Your carberautor is either gummed up or needs to be adjusted. Begin by going to an auto zone or similar store and gatting a can of carb. cleaner that gets added to your gas. Be sure to follow the instructions on how much you add per gallon. let that run through your bike for a while and see where you are. If cleaning the carb. doesn't hellp, then the carb. will have to be adjusted.

May 27, 2009 | 2002 Honda CR 125 R

1 Answer

Motor bogs when you give it gas


It is a fuel problem, it can be filter or rubber membrane,they are placed in the valve for fuel.
lp

Mar 20, 2009 | 1984 Honda VT 500 C Shadow

Not finding what you are looking for?
1984 Honda XL 125 R Logo

771 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...