Question about 1991 BMW K 100 LT

1 Answer

Fitted new ignition barrel, thought this was problem.ignition lights still wont come on indicators and lights and horn work,but starter wont. kill switch in right place any ideas please. thought it could be an earth problem. but im a builder not a mechanic. Bike 1984 k100 rs

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

Not sure what you mean by ignition lights but the run circuit goes through the kill switch, you can try jumping those wires to it. Also your problem as occurred with some friends, was faulty ignition switch which I believe is your problem.

Posted on Oct 08, 2009

Testimonial: "Thankyou,new barrel fitted. other issue was fuse had fallen out. I thought gap was do to heated grips being faulty. but any way back on road thanks."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an intermittent electrical fault on my 94 dyna wide glide. every so often it just cuts out as if the ignition has been turned off or the kill switch has been pushed. once it stops all the lights,...


"sometimes it starts after jiggleing the wiring loom"


That right there says you have a shorted/broken wire somewhere in the area that you "jiggle", so get an Ohmmeter and start testing in that area.

Mar 30, 2013 | Harley Davidson FXDWG - FXDWGI Dyna Wide...

1 Answer

Ignition wiring problen how to start yhe bike with no ignition barrel and keys


on my 1994 te 610 disconnecting the plug 2 the key works.keep the kill button/head light etc switches on lhs handlebar.if its not fitted fit a kill button 2 lhs..i think u go back 2 the coil,find pwr&earth wire&plug in.file paint off handlebar 2 get a good earth.

Aug 10, 2012 | 2000 Husqvarna TE 610

2 Answers

The Cars engine wont turn over but the lights and all other accessories work. Why would this happen?


Not one engine sound coming from turning the key means the back end of the ignition is failing. I think it is called the ignition switch. It is the cheaper part versus the full ignition and set of keys.

Oct 29, 2010 | 1995 Nissan Altima

1 Answer

I have an Isuzu Rodeo and the key is stuck in the ignition any idea how to get it out? Year 2000


replace the whole ignition barrel with new key and get key programmed by dealer
can remove barrel and key by removing steering column covers turn ignition to on position and with small shank screw driver push in hole in outer top rear section of barrel assembly then pull out ignition lock barrel with key in it. fit new lock barrel and key, program new key into system and can get door lock barrels coded to suit new key or get code for old key and cut new key so it fits mechanical locks on the rest of the vehicle (just wont turn in ignition) 2 keys for vehicle.

Jun 13, 2010 | 2000 Isuzu Rodeo

1 Answer

Ignition light on ,horn works ,indicators work will not start


Check your fuse then try again. Do not forget to check your main fuse- the ribbon type (30Amp)

Mar 23, 2010 | 1993 kawasaki GPZ 500 S - GPX 500 R

2 Answers

The bloody thing wont start! Hyosung gt650


are you sure the clicking is comeing from the coil it sounds to me like a sticking starter soloniod try tapping the starter soloniod &starter with a light hamer this will quite often free it up do this while operating the starter button if this does work I would be replaceing the starter soloniod ASAP you might also want to check the voltage regulater & all the earths on the machine

Feb 24, 2010 | 2004 Hyosung GT 650

2 Answers

OK, here's one that has everyone stumped. Backed into the driveway and turned my 98 Cherokee off. Keys in my pocket. Heard a loud noise like a leaf blower or shop vac. Thought it was my neighbor then...


it was probably the starter solinoid stuck.. Do you have a aftermarket alarm in it with a starter kill? or a remote start? Its possible to have a malfuntion and that was putting power to the solinoid. check the wires on the starter to make sure they are not melted, shorting power to the solinoid down there. (the small wire on the starter solinoid is the trigger, and should only get power when tring to start) if all that is good it is probably a bad starter. do you have an oil leak leaking onto the starter? oil leaks are very hard on starters.

(:DK

Oct 20, 2009 | 1998 Jeep Cherokee

1 Answer

Cannot diagnose source of electrical fault


TRY A TO BYPASS ALL SYSTEMS WITH A POSITIVE LEAD SHOULD WORK BUT YOU NEED AT LEAST 9VOLTS TO GET THE IGNITER TO EVEN THINK ABOUT LETTING THE COILS HAVE ANY POWER TO EXPLODE THE GAP POINT OF YOU'RE SPARK PLUGS SO GOOD LUCK

Jun 14, 2009 | 1997 Yamaha XVS 650 Dragstar

2 Answers

02 chevy trailblazer 4.2l car wont start installed new starter still wont crank or start test fuses all are good lights and horn operate but no start could it be the ignition switch not giving power to the...


You need to establish that you have 12v in the battery and that all connections are clean and secure. Lights horn etc do not give you voltage verification...your starter uses more amperage than anything else in the car. Once you are certain that everything is OK, check for 12v at the small wire on the starter with the key turned to start. If no volts, check the neutral safety switch or clutch switch Then check ignition switch for power in/out.

Jun 09, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
1991 BMW K 100 LT Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

phil cuzins
phil cuzins

Level 2 Expert

79 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...