Question about 2005 Suzuki Boulevard C90T

1 Answer

My 2006 suzuki c90t is boging down it seems in 4th and 5th gears. i shift down for a moment and start going again and it does it again. It did it the other day and when i pulled in the clutch it died on me. i pulled over and it started back up again. the air filter is good and the spark plugs seem to be good. i only have 8000 miles on the bike, and i just changed the plugs. I dont know if it my fuel pump, or air intake not opening, or what. Please HELP. ITs all stock right now. i use to have aftermarket pipes, k&n air filter and a fuel processor, which i thought was the problem, but when i put everthing back to stock it still did it. Oh yeah its been poping as well. FI cleaner, sea foam, and fuel contitioner and water remover didn't work.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 185 Answers

From what you describe it sounds like an air leak into the manifolds, chek to see if any hoses are disconnected, have a listen for any hissing noises and follow them, also listen for the Fuel Pump to prime when you tun on the ignition, it should pump up pretty quickly if it doesn't it could be clogged or faulty. To test it is complicated and can be dangerous if you not sure what your doing, it has to do more with volume than pressure.

Posted on Nov 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Selecting 3rd gear


Do you mean you can\'t find 3rd gear or it won\'t shift into 3rd gear? If you can\'t find 3rd gear, shift all the way down to neutral, then shift up 2 clicks. On my Suzuki Boulevard S-50 (VS-800) the shift order is 1st gear down, then up for neutral, 2nd, 3rd, 4th, and 5th. Your crotch rocket probably also has a 6th. If the problem is that it won\'t shift into 3rd, then you had best take it to the shop as it is not readily repairable without specialized tools and knowledge.

Oct 02, 2013 | 2003 Suzuki GSX-R 600

1 Answer

2010 crf450r jumping outta gear from 5th to 4th all other gears work fine


Terrence >>>> 1. Do not go through the gears while idling on a stand!!!
The rear tire is not moving at the speed that is normal for 4th or 5th gear..AND if you do get the tire moving that fast.. it is BEYOND DANGEROUS!!
This sounds like the 4th and 5th gears may need replacing.. or the shift drum detent for 5th gear has somehow become ineffective.. If you continue to ride this bike , you may cause more trouble and damage to the transmission.

Take this to a qualified professional!!

Jun 24, 2017 | Honda Garden

1 Answer

I have a 2006 Suzuki grand vitara that has got stuck in 5th gear twice. Since then it grinds when I shift it into 5th and reverse. Other gears are fine. Any ideas?


The syncros are going bad on that shaft. The 5th gear and Reverse are on the same shaft. You will have to bring it to a shop to have the parts replaced as it will only get worse.

Feb 16, 2011 | Suzuki Grand Vitara Cars & Trucks

1 Answer

2006 R6 Shifting Problem


Howdy: The 3rd and 4th gears are used the most, after awhile the dog and shifting forks get worn more. Try changing to Yamaha Lube simi-syn oil 10/40. Drain oil after warm up (get trans oil warm). The oil is in a silver 4gal containe at the Yamaha dealer. This oil has helped me.
Good luck - Doug

Dec 09, 2009 | 2006 Yamaha YZF-R6

1 Answer

Gets stuck between 4th and 5th


The shift rail fork ends are likely worn. There are fork contact/wear pads that ride in the gear shift sliding collars, and over time, or from low gearbox oil levels/insufficient lubrication, these pads wear, allowing "slop" and preventing the gears from engaging fully. I'd check the brngs, synchro rings and the dog clutch teeth, too. If you see metal/brass or aluminum shavings in the case drain plug, oil or on the bottom of the gearcase...that isn't a good sign. This sounds like a trans issue, not a clutch issue.

Sep 16, 2009 | 2006 Honda VTX 1300 S

1 Answer

While riding, the 4th and 5th gears do not engage promptly when you clutch and shift the gear. It sort of goes into neutral as one disengages the clutch and accelerate and then falls in place (ie 4th or...


This behavior is the symptom that your clutch plates are getting worn out. Since power is transmitted from the cam shaft to the front sprocket (smaller dia) is better at lower gears but once the rpm increases the clutch plates do not catch up with the cams rotation, hence slipping at higher gears & in between 4th & 5th gears the pulling power of the engine seems to go to neutral before engaging again. Check your clutch plates as well as the sprocket-chain- rear sprocket for wearing out of the gear teeth & replace if required. You will get back full power & acceleration as when the bike was new.............sodeep

Aug 19, 2009 | 1999 Yamaha XJR 400

Not finding what you are looking for?
2005 Suzuki Boulevard C90T Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...