Question about 2002 Yamaha YZ 426 F

1 Answer

Inlet valves for 426 yzf - 2002 Yamaha YZ 426 F

Posted by on

  • 6 more comments 
  • ruth22 Sep 28, 2009

    i need 3 inlet valves steel ones if pos for a 2002 426. and how much r they?

  • HIGH COMMAND May 11, 2010

    What is the question?

  • HIGH COMMAND May 11, 2010

    Price, availability, clearance specifications, part numbers, aftermarket options? What is the question?

  • Andrew Porrelli
    Andrew Porrelli May 11, 2010

    May I ask for clarification! What is it you want to know about the inlet valves? Is it the valve clearance?

  • rsrbob May 11, 2010

    What is your question? Please phrase your question so I can assist you with an answer. As it is, you have not asked a question as it appears to me.

  • Fabrice Wolters May 11, 2010

    Yes there are... Or, what is your full question?

  • yadayada
    yadayada May 11, 2010

    WE ARE NOT A PARTS STORE, CONTACT THE DEALER.

  • yadayada
    yadayada May 11, 2010

    what about the valves?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,748 Answers

Hi, Ruth22 for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YZ426 Head Motorcycle Parts eBay
Yamaha YZF 426 Valve Outer Inlet ProX
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3

Posted on Aug 08, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: YZF 426

Tip when trying to tow/pull
Get a bloke that is a bit heavy,he need to throw down all he's weight on the back wheel (rear of seat) when he drops the clutch to get the wheel turned against the compresion,also try this in 2nd or even 3rd gear,don't try on grass or gravel you will not get it wright try it on a tarr surface

Posted on Jan 20, 2009

  • 770 Answers

SOURCE: yzf 426 3rd gear slipping

3rd is stripped.

Posted on Jun 21, 2009

  • 1 Answer

SOURCE: my 426 yzf will not tick over can you help me

I had problems with mine at first but a new plug makes all the difference, not to mention the correct starting procedure: kick it down until it stops, use the decompression lever to bump the kickstarter a couple inches past the point where it stopped, bring the kickstarter back up and make a solid kick

Posted on Jul 19, 2009

  • 67 Answers

SOURCE: just bought a 2001 yamaha yzf 426 how do start

Keep in mind that it has an accelerator pump and squirts a big stream of fuel every time you twist the throttle. No one should tell you simply "open the throttle slightly'' whilst kicking. After a couple kicks, you would have it completely, hopelessly flooded. This is the most common reason for new owners' inability to start. After the first squirt(if needed) it's best to put the throttle hand on the throttle housing (off of the twist grip) to avoid opening the throttle each kick. If it becomes over fueled, leave the throttle closed and pull the red hot start button, then kick. Failure to start will be the result of too much fuel or too little fuel and you will have to learn the appropriate procedure for the particular bike and temperature. The de-comp lever and kick procedure is another story in itself. I highly recommend putting in a Hot Cams exhaust cam with auto de-compressor to make your kicking drill much easier.

Posted on Feb 16, 2010

  • 67 Answers

SOURCE: What is 2001 yamaha yzf 426 paint code

Frame color:
Deep Purplish Blue Metallic C (DPBMC)
This is Yamaha's color designation which is a dead end since they don't sell paint. Try Colorrite.com as they specialize in motorcycle oem match paint. This color is a 2-step process and requires the correct color primer to come out right. Color rite can fix you up with the proper coatings.

Posted on Feb 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set timing on yzf426 01


Hi i have a 2001 yzf 426 i got it with 3 bent valves so i replaced them and the pistion rings but still no compression but think my timing is right

Apr 07, 2014 | 2002 Yamaha YZ 426 F

1 Answer

Yamaha yzf 426 fifth gear miss fire


Hi, Buzaa and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking.
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Intake air leak.
10. Water, dirt, or rust in the fuel system, carburetor and/or filter.
11. Fuel tank vent system plugged or carburetor vent line closed off.
12. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
13. Carburetor controls misadjusted.
14. Damaged carburetor.
15. Incorrect valve timing.
16. Weak or broken valve springs.
17. Damaged intake or exhaust valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
My 2001 Yz426 wont run right please help YZ 400 426 450
few questions about my new YZF 426 YZ 400 426 450
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3

Sep 11, 2012 | 2002 Yamaha YZ 426 F

1 Answer

Yamaha yzf 426 fifth gear miss fire


Hi, Buzaa and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking.
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Intake air leak.
10. Water, dirt, or rust in the fuel system, carburetor and/or filter.
11. Fuel tank vent system plugged or carburetor vent line closed off.
12. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
13. Carburetor controls misadjusted.
14. Damaged carburetor.
15. Incorrect valve timing.
16. Weak or broken valve springs.
17. Damaged intake or exhaust valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Yamaha YZ450F Owner Manual Page 3
OEM parts for Yamaha
Yamaha YZ426F Owner Service Manual
few questions about my new YZF 426 YZ 400 426 450
My 2001 Yz426 wont run right please help YZ 400 426 450

Sep 11, 2012 | 2002 Yamaha YZ 426 F

1 Answer

Where can i download a workshop manual for a 2002 yzf 426


Hi, Kiknassjj for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3
What are the top 5 mods to get for yz426f YZ 400 426 450
Yamaha YZ 426 FN 01

Jun 26, 2010 | 2002 Yamaha YZ 426 F

1 Answer

I want a CRANKSHAFTS for yzf 426


go to the machineshop and ask them to make one for you...

May 14, 2010 | 2002 Yamaha YZ 426 F

1 Answer

Need valve clearences for all valves...


0.0039-0.0059 inch 0.11-0.15mm inlet cold
0.0079-0.0098inch 0.2-0.25mm exhaust

measure and record clearances before removing cams, then will need to get exchange shims if clearances need adjustment, the shims have the sizes etched on them , do not mix them up

Apr 04, 2010 | 2002 Yamaha YZ 426 F

1 Answer

Ive got a yzf 426 and a need to no how to fill a v55/5 form in to


Hi, Sean_harland for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3
What are the top 5 mods to get for yz426f YZ 400 426 450
Yamaha YZ 426 FN 01

Apr 02, 2010 | 2002 Yamaha YZ 426 F

1 Answer

Is there 2 oil filters on the yzf 426 and whair are they


no buddy only one you have to unscrew the bolt on the cover number 2 below163d1b8.jpg

Sep 21, 2009 | 2002 Yamaha YZ 426 F

1 Answer

Bike Parts


bikebandit.com

Jul 16, 2009 | 2002 Yamaha YZ 426 F

Not finding what you are looking for?
2002 Yamaha YZ 426 F Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...