Question about 2007 Daelim Roadwin

1 Answer

2004 Daelim Roadwin starter issue

My 2004 Daelim Roadwin wont start without a push start after it rains or if it gets cool. I had the starter clutch replaced about 9 months ago. It makes a ticking noise but just wont start. perhaps I need a new fuse? I can get it going with a good push start normally.

Posted by on

  • Anonymous Mar 26, 2014

    My daelim 125 roadwin r f1 was stolen I got it back in bad condishion it starts ok but lacks power

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 376 Answers

Sounds like the starter silanoid went bad. Take a screw driver and find the starter silanoid witch is uselly by the battery. It has the + cable coming from the battery to it and is bolted to it and then the other bolt has a cable going to the starter. Take the screw driver and touch the 2 bolts at the same time and the starter should turn the motor over. Make shure the bike is not in gear before you do this. Good Luck

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What type or size/diameter valve shims do I need for a daelim vjf 125. I don't want to pull heads asker off etc without having correct shims to get the job done there and then. Thanks.


Hi, Ragin for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
DAELIM ROADWINR VJF125 Service Manual
Complete Daelim Parts and Accessories
DAELIM Roadwin 250R Fi Owner Manual

Jun 08, 2016 | Daelim Motorcycles

1 Answer

What main beam bulb does a daelim roadwin r125 2010 model take??


Hi, Samantha for more information about your question and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Thread Daelim roadwin 125
2010 daelim roadwin r125 headlight bulb Google Search
https://www.tradebit.com/filesharing.php/search/0/daelim+r125

Feb 03, 2016 | Daelim Motorcycles

1 Answer

Daelim Roadwin Engine Light Problem


Hi, Elliot it should be noted that the reasons your check engine light or CEL stays on constantly or flashes and your bike will or will not start and may turn over or not, these conditions will vary from bike to bike depending on the year, make, and model and you should always refer to your owners/service manual for proper diagnostic procedures. It should also be noted that any type of prior work done to the bike or an abnormal event occurrence IE: adding accessories, electrical curiosity/adventures, laying bike down/crashes, rainstorms/bike washings just before CEL light issues started can be significant hints/aids into tracking down the gremlin, also carry the appropriate jumper wire to access fault codes to reduce the risk of being stranded or towed also keep in mind that your CEL comes to life if anything, and I do mean anything isn't 100% with the ECM like parameter spikes. This means that you could be staring at a major repair, or your speedometer sensor is contaminated and needs to be cleaned.
And the usual suspects are:
1. Severely discharged or a damaged battery check the terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary, you should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
2. Faulty charging system.
3. Faulty system sensor some models have up to 40 sensors
4. Faulty safety switches: run/off, ignition, clutch lever, neutral, side stand, tip over, fuel, and or their connections.
5. The engine got wet where it didn't like to get wet.
6. Faulty ignition circuit spark plugs, coils, cables etc.
7. Broken wire or worn insulation exposing wire to a ground situation especially inside wire harness at tight bends around fairing brackets, under dash panels, under fuel tanks over cylinder heads etc. Many harnesses are open on the ends that will allow water to enter and accumulate at v-bends.
Dielectric grease and contact cleaner are your best friends for wire/cable/harness connectors, look for corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Daelim VJF125 Service Manual How To Check The Fault Code
Odd starting and running problem
DAELIM ROADWIN VJ125 Service Manual
Daelim VJ125 Roadwin
DAELIM ROADWIN 125 FI Manual

Jul 10, 2017 | Daelim Motorcycles

1 Answer

I need a master cylinder for my daelim roadwin cant find one for sale anywhere.


Hi,,,it dosnt have to be for a daelim,,,take off your old one,,or ride the bike to a breakers/wreckers and they will have one that will fit.

Mar 23, 2011 | 2007 Daelim Roadwin

1 Answer

Hi, I'm from Malaysia. I own a Roadwin and I have a problem. My bike dies on idle when it's warmed up. It starts up instantly and fine in the mornings with just one push of the starter. But when it is hot...


Hi, Jinn_unlimit the first thing I would do is take it back to your mechanic since he was the last one to work on it and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a "LOAD" test if necessary, your battery may show 12.5 volts but have little or zero amps and needs to be replaced.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, points/condenser ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Air/fuel mixture screw improperly adjusted.
10. Accelerator pump damaged or not working.
11. Water or dirt in the fuel system, carburetor or filter.
12. Restricted, blocked or kinked fuel line.
13. Fuel tank empty.
14. Fuel tank contaminated with ethanol sludge.
15. The gas cap is not venting properly or fuel tank venting system blocked.
16. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
17. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you need please click on the blue links below. Good luck and have a wonderful day.
Thread Daelim roadwin 125
need help Valve clearance carb idle speed 1681
DAELIM ROADWIN VJ125 Service Manual
Complete Daelim Parts and Accessories
DAELIM ROADWIN 125 FI Manual

Mar 29, 2017 | Daelim Roadwin Motorcycles

1 Answer

Daelim parts


Use Google to search your part.

Mar 22, 2010 | 2007 Daelim Roadwin

2 Answers

Daelim roadwin, no spark cant find fuses?


the is the main fuse normaly inline on or near a battery cable in a little plastic tube.

Oct 08, 2009 | 2004 Daelim Roadwin

1 Answer

Engine cuts out when hot


This is usally caused by one of two problems. Most often the valves are not gapped right, which can happen as bikes age and go through repeated heating and cooling.
Another fairly common issue is that the carburetor mixture valve could be set wrong, and either running too rich or too lean, which makes the stalling "less noticeable" (read: doesn't happen) until the bike gets warmed up.
Hope that helps. Best of luck! :-D

Jun 27, 2009 | 2007 Daelim Roadwin

Not finding what you are looking for?
2007 Daelim Roadwin Logo

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daelim Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Joseph Hoffmann

Level 3 Expert

1702 Answers

RAYMONDO1953

Level 2 Expert

545 Answers

Are you a Daelim Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...