Question about 2004 Suzuki GS 500 F

1 Answer

Trun singles All the trun signles have been replace with after market ones now when you trun one side on they all flash

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 66 Answers

Assuming that each signal only had two wires, it sounds like you are missing a ground on the side that makes all the lights flash. With 12vdc system, when you are missing a ground, the lights that are missing the ground will use the other lights on the circuit to ground themselves.

Posted on Sep 28, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mazda b2000 1986 truck turn signls dont work replaced fuse flashers work but no turn signles

You do not replace any parts, until you find a problem

The manual you have, has to be a wiring diagram book

You study that & then do some testing to find the problem

Dec 05, 2014 | Mazda Cars & Trucks

1 Answer

Where is turn signle relay located on 2001 elantra

It is either located under hood or fuse box either under drivers side panel or passenger side

Apr 02, 2014 | 2001 Hyundai Elantra

1 Answer

Trun single dosent work,but hzzards does

There should be two seperate flasher relays for the two. Try finding the second one and swaping them if they match to see if the problems swaps. Then replace. Not sure of location on that car but check the back side of the fuse panel in the car.

Dec 02, 2013 | Audi A4 Cars & Trucks

1 Answer

2003 v star 1100 brake light running light problem

Here is your solution. The assembly you replaced likely used a double contact bulb, like an 1157.(very common brake light bulb) and the after market you got is only a single contact. If you look at an 1157, you will notice 2 filaments inside. One for full time on, and 1 for bright side switched(brake). If your new light only has one contact, then it is either going to be light full time on, or switched light. The bulb might not be compatible with your bike. Hope this helps.

Apr 14, 2013 | 2003 Yamaha V Star 1100 Custom

1 Answer

Where is the turn signal relay in a 95 chevy lumina

turn your emer signl hear the sound underneath the left side of the dash,touch it,that is the one.

Feb 20, 2012 | Chevrolet Lumina Cars & Trucks

1 Answer

Turn single goes really fast on left side only

Soounds like you have a turn signal bulb out on the left side of your vehicle, most trun signals will flash rapidly if one bulb goes out, check your turn signals on the left side and make sure all the bulbs are working, front and rear..

Hope this helps...

Sep 13, 2011 | GMC Yukon Cars & Trucks

1 Answer

My trun singles will not work

If the lights work but they do not flash, you can replace the flasher. Also check the fuse panel. If none of these solve the problem then you may have a defective turn signal switch. To replace the switch, you must remove the steering wheel using a puller. That is normally a job for a mechanic.

Mar 11, 2011 | 1994 Oldsmobile Cutlass Supreme

2 Answers

Where is the fuse for the left turn signal on a 2007 Ford Freesty

replace the rear bulb it flashs fast to let you know the bulb is bad, whatever bulb is not flashing thats the bad bulb, should be a 1157 bulb or a 1156 if it has one contact it's a 1156 if two it's a 1157

May 24, 2009 | 2007 Ford Freestyle Limited

1 Answer

94 cadillac deville turn signal problem

Replace bulbs as the contacts have melted or corroded and they will cross contact to the running lights that come on with the headlights. Check all.

Apr 26, 2009 | 1994 Cadillac DeVille

Not finding what you are looking for?
2004 Suzuki GS 500 F Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

78289 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4753 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides