Question about 1985 Honda XR 600 R

1 Answer

How do you remove crankshaft? The thing (28mm

How do you remove crankshaft? The thing (28mm nut) won't budge.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

You will need an impact driver to get the nut off. You will also need a flywheel puller, torque wrench, case splitter and service manual. The engine gets torn apart totally. Sorry for the problem.

Could you take a moment and rate my answer? Thanks!

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove crankshaft pulley


Try WD 40 or Lock ease

May 26, 2014 | Renault Cars & Trucks

1 Answer

Can't remove crankshaft damper bolt from 2001 Taurus OHV


try using the impact gun again only this time set it on do up tension as the bolt may be a left hand thread lock bolt /nut.

Mar 23, 2014 | Cars & Trucks

1 Answer

Fan pulley nut won't budge


it may be reverse threaded

Aug 11, 2012 | BMW Cars & Trucks

1 Answer

How do I remove the castle nut on the hub assembly of my 2001 Dodge Ram? I need to replace the hub but I can't get the castle nut to budge. Impact guns and breaker bars won't move it at all.


the nut that you are trying to undo may be a left hand thread ( anti clockwise to undo ) try it that way to see if it loosens it ........cheers.

Sep 22, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Lug nuts on right rear tire won't loosen! Turning counter-clockwise, won't budge.


pur a long bar on the end of the socket say about 3ft long as the nuts have been done up with a wrench gun ,max torque for a wheel nut is 40lbs and yours are about 120 i reckon

Jun 27, 2011 | 2004 Hyundai XG350

2 Answers

Procedure of tappet adjustment


make sure engine is warmed up. Put cylinder one at top dead center,remove the valve cover,loosen all adjustment lock nuts,adust intake and exhaust valves on cyl #1 and intake valve on #2 and exhaust valve on #3. now rotate crankshaft 360 degrees clockwise, now adjust intake valves on cyl#3 and cyl #4 and exhaust valves on cyl #2 and cyl #4.now tighten lock nuts and install valve cover. specs are intake valves 25mm clearance and exhaust 28mm clearance, use a feeler gauge,heres a picture to show you where to check clearance.7675a52.gif

Mar 14, 2010 | 1986 Suzuki Samurai

1 Answer

I am in need of a service manual for a masport


Thread the nut back onto the crankshaft to protect the threads. Carefully place a screwdriver behind flywheel being careful not to pinch any wires or damage anything. Gently pry against the flywheel with the screwdriver while tapping end of crankshaft with a hammer ( preferably brass hammer). A good solid tap will free the flywheel but you need to be sure you dont ****** the threads on the end of the crank.
Proceed at your own risk

Nov 29, 2009 | Garden

1 Answer

I need instructions on how to change a crank shaft censor on a 2000 pontiac grand prix gt


3.8L Engines
  1. Disconnect the negative battery cable.
  2. Remove the serpentine belt(s) from the crankshaft pulley. Please see Section 1.
  3. Raise and safely support the vehicle.
  4. Remove the right front tire assembly. Remove the right inner fender access cover.
  5. A flywheel holding device such as GM's J 37096 is required to keep the crankshaft from turning as the crankshaft balancer is being removed. Install this holding tool or its equivalent. Please see Section 3 for more information.
  6. Using a 28mm socket, remove the crankshaft harmonic balancer retaining bolt. Using special tool J 38197 or equivalent balancer removal tools, drawn the balancer from the end of the crankshaft. Please see Section 3 for more information.
  7. There is a roughly circular aluminum shield that protects the crankshaft position sensor; remove this shield. Use care not to damage it. Do not pry to remove.
  8. Detach the electrical connector from the crankshaft position sensor, remove the attaching bolts and separate the sensor from the engine block face.

8aa289e.gif
Dual Crankshaft Position (CKP) sensor removal—3.8L Engines

To install:
  1. Clean all parts well. Position the crankshaft sensor to the block face and tighten the bolts to 14–28 ft. lbs. (20–40 Nm).
  2. Install the crankshaft position sensor shield. Verify that the electrical connector is secure.
  3. Install the crankshaft balancer. Please see Section 3.
  4. Torque the crankshaft balancer center bolt to 110 ft. lbs. (150 Nm), plus an additional 76 degrees.
  5. Install the inner fender access cover and the right front tire assembly. Wheel nut torque is 104 ft. lbs. (140 Nm).
  6. Lower the vehicle.
  7. Install the serpentine belt(s), as outlined in Section 1.
  8. Connect the negative battery cable.

Oct 13, 2009 | 2000 Pontiac Grand Prix

1 Answer

Cant get the crankshaft pulley off


It's most likely right hand thread. You will have to use a large breaker bar to get enought leverage to remove this nut. Or you can use what ever you have and place a steel pipe on the end of it for extra leverage. If it doesn't budge, you may have to soak it in penetrating oil, and use an impact wrench. Make sure you remove the large washer under the nut "before" you remove pulley.

Nov 11, 2008 | 1997 Jeep Tj

Not finding what you are looking for?
1985 Honda XR 600 R Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...