Question about 2006 Daelim History

1 Answer

My sym jet wont start.replaced carb as idle injeter blocked still wont start experienced mechanic cant fix it electrics fine spark fine fuel and air fine battery fully charged still wont kick in

Posted by on

  • crystabel Sep 27, 2009

    the mechanic took the carberater apart and ther was a blockage in the idle injector that he couldnt unblock he thought this was the problem so replaced with new carberater but the engine still wont kickin it trys but wont turn over he checked fuel air spark and electrics and sys thers no reason why it wont start it just doesnt

  • yadayada
    yadayada May 11, 2010

    how did you determine the injector is blocked, also you just said it had a carb, confused here, what is this?? where is it made??

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try ya compreshon if thats ok then try your timing on yas fly weel

Posted on Jan 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Sym moped starts but won't idle It shuts off when trying to give it gas


Hi, Gigi and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the links below. Good luck and have a nice day.
Scooter Questions Get Answers to Your Scooter Starting Question
Scooter Troubleshooting Scooter won run All about Scooters
My chinese scooter wont idle or start Check the fuel petcock
http://scooterunderground.ca/knowledge/manuals/documents/sym_fiddleii125_service_manual.pdf

Oct 01, 2016 | Sym 125 EXC SIXDAyS Motorcycles

1 Answer

Sym jet euro I have cleaned the carb put back together it starts at fast idle then settles down then stalls take the plug out and is wet with fuel so I am confused can some one please help me


take carb off again and check float height it should be 8.8 +- 1mm then screw air mixture screwin untill it just seat the unscrew 1 1/4 to 1 1/2 turns once running set idle to 2000 +- 100 for the 50 and 2100 +- 100 for the 100 model

Jul 22, 2014 | 2004 Sym Husky 125

1 Answer

Strating PROBLEM


Hi, Andrew and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the blue links below. Good luck and have a wonderful day.
Why won my SYM Jet motor scooter start
Scooter Troubleshooting Scooter won start All about Scooters
Sym Jet 50 Service Manual
SYM Sanyang Scooter Parts Racing Planet USA
Sym JET 50 series Owner Manual

May 09, 2017 | 2007 Sym Jet Euro X 50

1 Answer

I have a kohler 12.5 in my J.D. STX38. Starts and runs good but has a slight miss on low idle. It may have it at high idle but you cannot notice it. The carb has been taken apart,cleaned, carb kit...



hi there harryandmeli
sounds like you still have a restriction in your carb or the float level is not right
check all the opening s and jets carefully, particularly main jet and emulsion tube air bleeds
and the idle air bleed , and idle jet, is the tank clean and no water ? , is the tank breather working ?, make sure gaskets at carb flange are ok - no leaking of air , make sure air filter is not blocked ?

provided compression and spark ok,( spark should jump a 6 mm gap minimum ) to pass a coil test and fuel flow from tank to carb is good , these engines have hydraulic valve lifters and like 10w/30 kohler oil , everything being = engine should run good

remember F A C T S

F = Fuel , A = Air , C = Compression , T = Timming , S = Spark

take a look

cheers hope it helps

pauly46

Sep 16, 2011 | Garden

1 Answer

My sym symply 50 was left 4 bout 6 wks over xmas cos wouldnt start. i have snce put new batter an spark plug on. it nowstarts 1st time an will run idle for ever but after riding for while it cuts out it...


sounds like dirt in the carb. If left for a while the petrol will go off and clog up the jets in the carb. I suggest replacing the fuel and cleaning out the carb.

Mar 01, 2011 | Sym Husky 125 Motorcycles

1 Answer

Kwasaki 400 eliminator wont start, cleaned out carbs,checked spark,tried most basic things. will start only if carb air filter is blocked up


YOU ARE CREATING A VACUUM BY BLOCKING OFF THE AIR INTAKE, IT IS SUCKING THE GAS OUT OF THE IDLE JET OR THE CHOKE. The low speed jet is either the wrong size or clogged up, You can try squirting in some carb cleaner as it is trying to run, or just take the thing apart again, and make sure the jets are clean, get a guitar string wire in there and blow through the hole. And before you do that, check the pump, make sure it is pumping fuel, not just sucking it in. Check it out.

Jun 09, 2010 | 1986 kawasaki ZL 900 A2 Eliminator

3 Answers

I have sym jet 50 99 reg it just cut wont start


Is there a spark at the plug? if so its likely to be fuel related... is the plug getting wet? if so its likely to be air (or spark) related
Ride-Safe
Bike-Doc

Please mark this as helpful (if it has been!!)

Aug 13, 2009 | 2006 Daelim History

1 Answer

Scooter wont start


carb could be clogged with trash even though fuel is gettin to carb the main jet could be blocked not letting fuel enter intake

Aug 02, 2009 | 2004 Sym Husky 125

1 Answer

Sym Jet euro 50 wont start


if you put to much fuel in the pot you might have flooded it....did you take off the fuel line to make sure you have fuel comming out?if it is not fuel injected.than try changing the jetting in it.does the plug have wet oil on it when you take it out or what color is it?

Mar 26, 2009 | 2004 Sym Husky 125

Not finding what you are looking for?
2006 Daelim History Logo

Related Topics:

639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daelim Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

TEKUSER
TEKUSER

Level 2 Expert

86 Answers

Joseph Hoffmann

Level 3 Expert

1702 Answers

Are you a Daelim Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...