Question about 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

Break light does not work and the two small head lights as well.

Break light dose not work and the two twin small head lights, I have changed light bulbs.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

The break light not working could be due to the pedal sensor not connected or faulty .check also the wiring loom under the seat as it could be disconnected .
in regards to the small headlights , check all fuses as you could have blown fuses as well .
contacts could also oxidise and not making contacts

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are my break lights working until I turn on the head light?


Sounds like it could be a bad earth connection or try changing the bulbs .

Jun 02, 2014 | 2006 Nissan Navara 2.5

1 Answer

Fc twin light gun nes dose not work on my liat screen tv


You can't. Older light gun games will only work on a tube TV. They will never work on a Flatscreen TV.

Dec 05, 2013 | YOBO Fc Twin Console

1 Answer

2008 honda cbr125r the head lights on my cbr change from one side to the other pending on high or low beam is this normal or should they both be on at the same time?


The high and lo beam even on an Africa Twin are made separate so it dose not overload the charge manager of your bike. I tried wireing both of the bulbs in paralel and ended up burnig my battery charging unit.

So in conclusion they should not be on at the same time. The headlights operate fine on your bike.

Jun 29, 2011 | Honda CBR 125 R Motorcycles

1 Answer

Check engine light comes on when breaking and car slowing down


You have so many problems it could be considering the head gasket repair the engine light could be anything from a cooked sensor to timing being off.

May 09, 2010 | 1999 Daewoo Leganza

1 Answer

My break light works with the lights on but when you push the breaks it dose not get brighter like it should


check the brake light fuse but the chryslers are notorious for the break light switch going bad. should be available at any parts store

Feb 07, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Break lights not working properly


hi
silly thing to sugest but would you have the brake/side light bulbs in the wrong way? if you look closley at the bulbs there is two pins either side on the round silver part. 1 pin sits higher than the other, make sure you fit the bulbs in the bulb holders to match the pins on the bulb sounds complicated but it realy is an easy mistake to make.

Jan 26, 2010 | 2004 Jeep Grand Cherokee

1 Answer

2004 vw jetta. epc light came on, what dose this mean? also tail stop lights are on why?


your break light switch is bad and needs to be replaced it connects to the break peddle very easy to change

Oct 26, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

Black dont print color light ,clean heads dose


hi this is kamal..

you may refilling your both catridge of printer and if it does not work then u can purchase new one...

thanx for choosing fixya

regards
kamal singh

Oct 09, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Break light is out


This is the corrective method for your brake lights not working when your headlights are on(2000 Jeep Cherokee Larado).
1) The cause of the problem is heat from the bulb.
2) Remove the light assembly as if you were going to change a bulb.
3) Turn the socket and remove it from the taillight assembly and set it aside(check to be sure your bulb is not burnt out).
4) Look at the opening, you will see 3 flat chrome colored contacts on the assembly.
5) Notice the one by it self at the top of the opening, that is the "ground".
6) If you look closely you will notice the plastic around the ground contact has shrunk a little bit, this caused the contact to pull away from the socket, causing the problem.
7) With a small flat head screwdriver, VERY GENTLY pry up the contact so it stays slightly upward by itself.
8) Re-insert the bulb assembly back into the housing and press your brake petal with your lights on.
9) You should be in good to go!
10) Tools: Phillips head screwdriver and a small flat head screwdriver.
11) Time : 5 minutes per light

Nov 24, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2004 kawasaki VN 1500 Vulcan Classic Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...