Question about 2000 Harley Davidson FXD Dyna Super Glide

1 Answer

Installing new handlebars, where are wire

Installing new handlebars on a 2008 Harley Superglide, where do you disconnect wires for controls indicators, etc.?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

One the earlier models, the handlebar connectors were down under the tank. But, Harley changes electrics every year so you never know. All I can tell you is "follow the wire".

Posted on Sep 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

With the key off and key fob next to the bike when i hook the battery up the horn stays on constantly and the abs module sounds like its spooling. also headlight comes on. What could this be???

Hi, David you may have pinched some wires installing the handlebar control housings for this scenario you will need your service/owners manual if you can not find the first and best tool you ever bought for your Harley, despair not, for a mere $9 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below and for more specific information or questions at no charge please feel free to contact me at Good luck and have a nice day.
How to Install Handlebars on 2015 Harley Street Glide
Harley Davidson DYNA Models Workshop Service Repair Manual 2012
How 6ya Works 6ya A must have !!! Totally "FREE"

Nov 27, 2016 | 2012 Harley Davidson Dyna Glide Street Bob

1 Answer

How do i change handlebars on a 2010 Dyna

Unplug the handlebar wires where they connect to the wiring harness. Remove the black electrical connectors at the end of the wires. Pull the wires through the ends of the handlebars. Silicone lubricant sprayed into the bars will make this a bit easier, and you should be able to leave the silver pins on the ends of the wires, saving yourself some work when installing your new bars. Leave the wires connected at the handlebar controls when doing this. Just unscrew the controls from the bars and pull the wires.

Aug 21, 2012 | 2000 Harley Davidson FXD Dyna Super Glide

1 Answer

My 2008 rocker c keeps blowing fuses for the headlight, might I need a new one?

Check your wiring. Sounds like you may have a pinched wire on the headlite circuit. Insulation is probably rubbed through someplace and shorting out. If you've been in the handlebar controls for any reason recently, that's where I would start.

Jul 28, 2012 | 2008 Harley Davidson FXCWC Softail Rocker...

1 Answer

I need to know where then brake sinding unit is located on a 2008 harley davidson superglide

You have two brake light switches. One is at the front brake lever inside the right handlebar switch housing. The rear brake switch is a pressure switch in the metal rear brake line. Find the metal brake line coming from the rear brake master cylinder going to the rear wheel. It's usually located under the bike somewhere. Just follow the line.

Good Luck

Sep 12, 2011 | Harley Davidson FXD Dyna Super Glide...

1 Answer

Were do i disconnect handlebar control wiring on a 2008 springer

Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
How to Install Handlebars on 2012 Harley Street Glide

May 21, 2010 | 2005 Harley Davidson FXSTS - FXSTSI...

1 Answer

How do i replace right handlebar grip on 2008 fat boy

To change the throttle grip, first loosen the cable adjusters as much as possible. Then, remove the two bolts that hold the switch housing halves together. Lay the top half aside being careful not to break any of the wires. Roll the throttle grip until you can disconnect both the throttle cable and the idle cable from the grip. Slide the old grip off the handlebar. Put some thin grease inside the new grip and on the nylon piece where the cables connect. Slide the grip onto the handlebar and reconnect the cables. Replace the top half of the switch housing being careful not to pinch any of the wires. Make sure the switch housing is pushed all the way up against the front brake master cylinder and tighten the two bolts. Readjust the throttle cable and idle cable. Check for proper operation of the throttle assembly. Improper assembly of the throttle control can cause uncontrollable acceleration of the motorcycle leading to severe injury or death. Make sure it works correctly BEFORE you start the engine.

Mar 28, 2010 | Harley Davidson FLSTF Fat boy Motorcycles

Not finding what you are looking for?
2000 Harley Davidson FXD Dyna Super Glide Logo

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4899 Answers


Level 3 Expert

4349 Answers


Level 3 Expert

79865 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides