Question about Yamaha TW 200 Motorcycles

1 Answer

I keep blowing reeds through the carb,I got a

I've blew three sets in two days! Wht could cause this to happen. They blow,crack out through the carb side not the cylinder,I've replaced the stater assembly the ingnition an exhaust, I don't know why this keeps happing ???

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 66 Answers

If you are positive the exhaust is not clogged, have you rebuilt the top end recently? The only thing I can think of is the piston is in backwards forcing the exhaust side to push into the carbs. The arrow on the piston always points to the exhaust ports.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My 93toyota camery overheated cause of split n radiator replaced with new radiator but still blows water out of overflow think could b waterpump n sounds like missing could that b because of the water blew...


Possibly blew a head gasket allowing combustion gases to enter the cooling system and force coolant out of the overflow tank. This can be verified by doing a compression check on each cylinder.

Jan 31, 2015 | Cars & Trucks

1 Answer

My car is repeatedly blowing a fuse


There is a open hot wire somewhere and it is grounding out have you tried changing the ignition switch

Mar 28, 2014 | 1993 Saturn SL2

1 Answer

Ignition feed fuse 16 blows when i turn on the key


Hi,
You have a 'short circuit' in the system or a bad ground somewhere. Go online and search on the Dodge/Plymouth/Chrysler forums for this issue. I've read about myself but don't recall the common cause.

GL,
Td

Oct 03, 2012 | Plymouth Voyager Cars & Trucks

1 Answer

I have a 2002 XL7 and the fuse for the dash lights and tail lights keeps blowing. I've changed it three times now - the lights will work for a few days and then the fuse will blow again.


something is shorting to ground...look for any bare wiring...i had one time ..a brake light fuse kept blowing...after about 2 days found out it was the bulb it self (it was working too)...strange ???

Jun 07, 2011 | 2002 Suzuki XL-7

1 Answer

My 1989 rm 250 has just had a rebuild and is running fine but it wont go into the band


If you are referring to the power band,this is when your reed valves open.Check for cracked or damaged reeds.You need to remove carb and reeds are between carb and cylender.Check also the rubber boot that carb attaches to for cracks.this will cause intake air leak and cause reeds to not open properly.

Mar 21, 2011 | 2003 Suzuki RM 250

1 Answer

It wontt start it has spark


There are only three things that your bike needs to start, Spark, Compression and Fuel, if you say that it has spark and compression then the problem has to be fuel, Make sure that there are no blockages in the line from the tank to the carb, if that is not the problem then you will have to pull the carb and clean out all the ports. I disassemble them as much as possible and empty a can of carb cleaner into a clean coffee can let it soak overnight and then blow out all passages with compressed air and reassemble. You should also pull off your reed cage and check to make sure that your reeds aren't cracked or broke. If your bike was runninng before and you give your carb a good cleaning and the reeds look good and it still doesn't work then you are going to have to look at the other two requirements, your spark should be a bright blue, if not try a spark plug first (you may want to try that before the carb cleaning) next you should get a compression tester and check the compression to make sure it is high enough. Your bike might feel like it has lots of compression but it might be low enough to make it hard to start.

Dec 09, 2009 | 2003 kawasaki KX 125

3 Answers

1994 suzuki RM80R: problems with the carb loading


Sounds like trash in the gas supply is holding the float needle open causing the float bowl to overfill. Remove the petcock from the tank and clean out the water trap bowl (some petcocks don't have a bowl). Drain some gas from the tank through the petcock hole to help clean trash out of the tank. Install an inline fuel filter
between the carb an the gas tank.

Now clean the carb one more time using an air hose to blow trash out of the float seat and then blow out the fuel line as well. Be certain the float level is set at the proper height. This should solve the problem for you.

Please rate this solution as a "FixYa" if this solves the problem. Thanks!

Mar 25, 2009 | 2004 Suzuki RM 125

1 Answer

The Red,Blue,Green do not line up and keeps blowing fuse


you need to replace 3 items FL231, DL231, CL230 then resolder the vertical IC and flyback conections. You can get the three components under the RCA parts category at this link.
http://servicemanuals.vstore.ca/

Jan 25, 2009 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

Speaker keeps blowing fuses


Sounds like a short circuit or a defect inside the circuitry that is allowing more power to flow through, thus blowing the fuse. My advice would be to dispose of these speakers for safety reasons and invest in a good quality set.

Aug 29, 2006 | Recoton Advent Advent AV570 Computer...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...