Question about 1995 kawasaki ZX-6R Ninja

1 Answer

Cuts out real bad at 50 to 55 mph. - 1995 kawasaki ZX-6R Ninja

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

Does it cut out... or does it feel like it does when you run low on fuel and have to switch to reserve?...could be fuel filter is clogged. if after replacing filter try adding some seafoam carb cleaner...you can get it from Autozone for $10. pour about 1/3 can into two to three gallons gas and get on it on some open roads for about 10 to 15 miles and see if that"ll work.. then if that doesnt work you'll have to take fairings off and look at your plugs and plug wires...make sure that the plugs are not worn/broken and that you have tight plug connections.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It cuts out and runs real bad once i get to 30mph. if i keep my foot in it, it will gain speed but runs real bad. cutting out.


Being that it "sorta" runs means you have "Spark" so it is either a fuel problem or a timing problem. Can't help you beyond that.

Oct 21, 2015 | Motorcycles

1 Answer

2005 sUZUKI fORENZA KEEPS GIVING CODES P0133, P0134 AND P0138


did you even look those codes up, or just want us to for you?
both oxygen sensors are upset.
that dont mean they are bad. it means they READ wrong
that can be caused by over 50 things
so do you want us to Gue$$ or show the tests ,stated in the FSM.
fact. serv. man.
?
My wild guess is the engine runs very bad, or lean.
ever do a tune up in last 9 years?
full by the book tune up;.>????
could be clogged fuel filter. low fuel pressure.
or many other things.
are the spark plug tips (any) black? or bad spark plugs.
the shop will do that first
then scan it with a real scan tool that does all suzuki DTCs.
then check all live data. to see if its running right.
it wont be.
The live data tells the mech which path to find true cause.
if wanting to do tests. say so. else, toss a coin.

Jul 06, 2014 | 2005 Suzuki Forenza

1 Answer

05 Pacifica stumbles during acceleration


check the manifold is not leaking on the intake side. also check and clean the intake top. carb clean helps to clean out all the muck out on to a cloth. also carb cleaner will help if you have a leak spray round the intake when engine is a temp. engine will cut out or speed up depending on carb cleaner used. were there is a leak.

Jan 19, 2014 | Chrysler Pacifica Cars & Trucks

1 Answer

While driving something made a popping noise and truck started shaking


sounds like a bad u joint or swing bearing or just something loose in thr drive train

Nov 22, 2011 | 1992 Dodge Dakota

1 Answer

Transmission is not shifting properly on my 2000 nissan frontier 2wd pick up, auto It revs at 3-4000 rpm instead of a nice consitent 2000rpm, revs real high and doesnt change gears intill 20 mph, it doesnt...


You could have a bad valvebody in your transmission or a bad pump in your transmission or your clutches are bad. In any case you have a bad transmission. Please rate my answer.

Nov 17, 2009 | 2000 Nissan Frontier

1 Answer

My 87 civic sedan shakes real bad, the brake pedal wont go down, the front end shakes real bad, and the car sometimes idles low to were i cant go over 25 mph. what is wrong


SOUNDS LIKE WORP ROTORS I REPLACE ROTOR AND BRAKE PADS SEE IF THAT HELP AND CHECK WORN PARS IN FRONT END LIKE TIE RODS

Aug 20, 2009 | 1987 Honda Civic

1 Answer

Why would it quit running going down the interstate at 75 mph


check for fuel prusser 40 psi if not change the fuel pump be carefule when u check for the fuel prusser there is a small valve steem on the injector real

Mar 17, 2009 | 2000 Pontiac Grand Am GT

1 Answer

1994 lexus es300


check your thermostat. You could have a bad one or old one.If you have a bad one it can block the water intake to the ingine, thus causing your engine to work harder, and sometimes loose power. Get your thermostat checked asap before you cause major damage to your engine.

Oct 17, 2008 | 1994 Lexus LS 400

Not finding what you are looking for?
1995 kawasaki ZX-6R Ninja Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...