Question about Triumph Speed triple Motorcycles

2 Answers

Motor cuts out when gear engaged

Bike fallen, motor turns over no problem in neutral but as soon as it's put in gear motor cuts out. some fluid spilt - coolant, fuel, perhaps hydraulic from clutch?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Make sure you have your stand up before you put it in gear. Some bikes have a stand switch that doesnt allow the bike to be in gear while the stand is down. This switch may have been damaged when the bike fell and now be malfunctioning.

Posted on Sep 27, 2009

Testimonial: "THANK YOU MR BEETHAM!!Ignorance can be bliss but it can also be bloody annoying!You have saved me from a sleepless night-so simple,will never forget!"

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It isnt always the switch. i had similar prob with bonny. it ended up being the connector located behind lhs coverplate. to get out of trouble remove side cover, dissconnect connector that connects the wiring to the stand switch and bridge out plug. this will get bike operational but remember safety mechanism for side stand is now bypassed. order new stand switch harness.
rob g

Posted on Apr 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kawaski kmx125 gear problem ?


Do you allow the bike to warm up at least close to the operating temperature before putting it in gear ? I have found that all my bikes needed to get the oil warmed up a bit before being able to engage the gears. It has something to do with the "Wet Clutch" I believe. The only other thing I can think of is if there is a problem with the Neutral Safety Switch.

Aug 26, 2014 | kawasaki KMX 125 Motorcycles

2 Answers

1995 Suzuki VS 800 Intruder dies when put into gear


Just about to suggest kick stand switch. Happened on my Buell.

Oct 30, 2017 | 1995 Suzuki VS 800 Intruder

1 Answer

I have a 2003 Honda Gold Wing California Side Car trike conversion - Radio is all original equipment... Radio will play on AM, FM1 and FM2 if ignition in ON poition (motor not running).....will not play...


I have same ride same problem put your ear down by the cluch lever and you will hear a click when you let the cluch out the same time the radio quits if you take the switch off and hold it closed the radio will work all the time

May 19, 2011 | 2003 Honda GL 1800 Gold Wing

1 Answer

My 650 dragstar starts fine but cuts out as soon as I engage gear. Have checked the side stand switch and it is working fine. Any ideas?


The side stand switch can work in cojunction with a clutch switch.
It still sounds like a side stand problem, check the wires and plug, use a multi meter to check the switch. If you didnt check it that way.
The switch may work but the stand is not pushing the contact far enough

Does the neutral light work correctly?

Assuming it is not clutch drag with the bike jumping and stalling when put in gear

May 13, 2010 | 1997 Yamaha XVS 650 Dragstar

1 Answer

Gear box goin in to gear but still like it is in nutural


If you select a gear without pulling clutch in it will grind and stall.
If you are certain the bike is engaging a gear and still seems it is in neutral, your clutch drive is broken.
Alternatively, the gear selecter fork bolts maybe loose behind the sidecover, allowing selector to partially engage only and return to neutral. Try selection thru' higher gears, place bike on a stand and turn back wheel in gear, if gears turn and motor doesn't...it is the clutch. If you cannot select a gear proper with rear wheel turning, your selecter is suspect.
Goodluck, and Cheers.

May 07, 2010 | 2004 Yamaha DT 125 R

3 Answers

Bike runs ticks over in neutral soon as iput in gear cuts out


hi...put kickstand up 1st befor putting in gear....as this how bigger hondas work its a safety thing so u carnt ride off with side stand down...but cuts engine if kickstand still down & then wont start as you in gear.....even if kickstand up wont start in gear!!...hope this helps

Jan 26, 2010 | Honda XL 125 R Motorcycles

2 Answers

1997 Yamaha FZR 600 cuts out when shift into first gear


Does the bike have a sidestand switch that cuts the power if the stand is left down? If it does, disconnect it and temporarily join the ends together and try starting....

Mar 20, 2009 | 1994 Yamaha FZR 600

6 Answers

Stalling problem from neutral to first gear


Hi and welcome to FixYa,

Initially, if the bike will be run without its own battery, the engine will really stall. This is because there will be no consumer for the voltage output other than the ignition system which will clamp down when the engine is revved and the voltage tends to go higher still.

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Nov 27, 2008 | 1984 Yamaha XS 400 L Maxim

2 Answers

What going on


Bad switch or Solenoid. depending on the bike.

Mar 17, 2008 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4974 Answers

yadayada
yadayada

Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...