Question about 1995 Suzuki GSX 600 F (Katana)

2 Answers

Bike stalls.and some times will idle at 2000 rpm,without choke.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1995 katana 600 gas pours out the tube on top of cylinders into the air cleaner and dies.

Posted on Aug 09, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

Your carbi will need a clean first and tune as well . air filters will need cleaning to allow full air intake .
Make sure to have clean spark plugs too

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Idles with 1/2 choke. If open choke, or throttle - engine dies without any RPM spike. Carb was cleaned, jet is clean. When idles, there is gas in the primer bulb.


Hi, Andrew and the usual suspects are:

1. Fuel cap or fuel tank is not venting properly.

2. Fuel filter clogged.

3. Fuel line pinched or kinked.

4. Float needle and seat sticking.

5. Float level too low.

6. Carburetor bowl vent line clogged/blocked/pinched.

7. Idle adjusting screw set too low.

8. Air/fuel mixture screw set too lean.

9. Idle port, transfer ports, slow air jet clogged.

10. Slow fuel jet clogged.

For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.

Bike won Run without Choke

Dirt Rider Magazine

Bike starts up idles on choke dies with choke off our when warm XS650 Forum

What could be wrong if bike will only run on choke

Mar 10, 2016 | GAS Motorcycles

1 Answer

I have a 1995 kawi 750 and at idle she runs great but as soon as u go to ride and get to 5000 to 6000 rpm it will just die but if u push in this black little button under the clutch or play with it a bit...


triple check choke? Is it staying on once warm? Mine was cable and siezed and choke on to start from cold, when it warmed up it turned out choke was stuck half on. Like if you ride then whack choke on it stalls?
ZX7r

Mar 15, 2012 | 1995 kawasaki ZXR 750

1 Answer

Bought the Bike Used from a HD Dealer 2004 XL1200C Sportster. 2400 Miles 2nd time I took the Bike for a ride It was Slamming into Gears Very Loudly, Had the Clutch adjusted and Gasket Replaced, Next Time...


check for the pinched vacuum line at the carb,, sportys are hard to locate because they are tucked in way behind , it ay have come disconnected, unless there is a load on the motor it will idle fine, add a little load and you get the feeling no fuel is getting through unless you rev it up

Jul 01, 2011 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

I have a 2005 harley davidson sportster xl 1200 custom. after bike is at normal operating temp.when i stop for redlight or stop sign, bike idles to fast.i can let out on clutch little bit and it will slow...


If the carb is adjusted correctly, the engine will not idle without the choke when cold. I will usually take at least 3 to 5 miles of riding to get the engine warm enough to idle by itself without the choke. If your bike is a full operating temperature, it should idle at about 1000 RPM. If it's idling higher than this, you need to slow it down a bit.

Remove the air filter cover and look at the top right side of the carb. You'll see a screw there . This is the throttle stop screw. Turn the screw counterclockwise to lower the idle speed to 1000 RPM or so. Blip the throttle and let it settle back to idle. Reset it if necessary. Once set, put the air cleaner cover hand on.

Mar 14, 2011 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

2007 virago 250 idle fine w/choke idle fine no choke can very slowly raise rpm but while at stationary hi idle the rpm's flucuate from 300 rpm to 3000 rpm without touching gas when you give gas normal it...


Hi, Dma942 and the usual suspects are:
1. Extremely lean fuel mixture.
2. Dirt, rust, water, or ethanol sludge in the fuel system.
3. Sticky throttle cables.
4. Multiple carburetors not in synchronization.
5. TPS sensor out of adjustment or faulty.
6. Wrong spark plugs for the type of service.
7. Throttle bodies not in synchronization (FI)
8. Faulty O2 sensor.
9. Clogged, stuck, or faulty IAC valve.
10. Aftermarket components not compatible with ECM.
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
Virago XV250 Choke and Idle Problem Premium fuel
Yamaha Virago 250 Idle Stall Issue
http://www.groussin.com/multi/XV250.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

May 23, 2010 | 2005 Yamaha Xv 250 Virago S

2 Answers

Bike starts fine on choke then ticks over when choke off. within 2-3 mins the revs decrease to the point of stalling. have adjusted tick over to around 900 revs but as soon as engine warm the problem re...


If your bike has ever sat for more than a few months at any time, the carburetors could be plugged with gasoline residue. If so, they will need to be disassembled and cleaned.
Otherwise, make sure all of the normal tune up items have been performed; valves adjusted, air filter, spark plugs, etc. And make sure there are no air leaks between the carburetors and the engine.
Finally, if the above things are all good, then I would perform a compression check. With the throttle held wide open, you should see at least 140psi of compression, on every cylinder. Anything lower than that will cause an erratic idle quality and overall poor performance.

Dec 18, 2009 | 1996 Suzuki RF 600 R

1 Answer

My 2005 Katana is stalling left and right


Has the bike been sitting for any time longer than 4 days? 4 days is enough to clog idle jets. Cleaning the carbs if it has carbs, is the first defense against idle to low rpm stalls. Pull the carbs and clean them out. Definitley will help you out.

Oct 19, 2009 | 2005 Suzuki GSX 600 F (Katana)

1 Answer

St1300 will not run below 2000 rpm


your bike has three different fuel delivery methods...choke , low speed or pilots in the old days, and main fuel rails or mains in the carb days. your choke or idle circuit is not working. on fuel injected bikes you have a relay which you need to get checked to see if it's a possible contributor. best to take to honda dealer and they can diagnose the problem. hope that helped a little sir.

Jul 18, 2009 | 2005 Honda STX 1300 Pan European

1 Answer

Drives great but at/when drops to idle it stalls


When you are on the bike and riding do you still have the choke out? And stop spraying starter fluid into the carbs..bad bad bad.... bikes start with out that stuff and if you need it then something is wrong.. your gonna mess something up doing that....let me know about the choke and we will go from there...cj_monaco@hotmail.com

Jun 21, 2009 | 1990 Suzuki GSX 750 F (Katana)

Not finding what you are looking for?
1995 Suzuki GSX 600 F (Katana) Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...