Question about 2002 Triumph Trophy 1200

1 Answer

Fuel system seems to not give proper power. it seems to run on just 3 cylinders put new plugs in and had carbs cleaned

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,167 Answers

Whats the coil like on that 4 cylinder

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I can't get my blower to accelerate. It will only idol on full choke. If you pull trigger it bogs down. I replaced the fuel line and sprayed carb out.


Check the following, and then clean or replace:
  • Fuel Filter - Located INSIDE the Fuel Tank
  • Spark Plug
  • Spark Arrestor - at muffler
  • Carburetor - May need a rebuild kit
Watch this as well...

and...

Oct 18, 2013 | Stihl Bg 55

1 Answer

I have a pw 80 it runs perfect when its in neutral, whe you put i in gear it runs fine until you give it gas then it bogs out.I have put a new cylinder a piston ring and carb. Still does the same thing


Hi, Adam and the usual suspects are:
1. Throttle cables misaligned or misrouted.
2. Damaged or restricted fuel tank venting system.
3. Intake system air leak.
4. Vacuum piston malfunction.
5. Pinholes or torn diaphragm.
6. Accelerator pump leaking or no output.
7. Plugged bowl vent or overflow.
8. Fuel level in bowl too low.
9. Restricted fuel supply passages.
10. Plugged jets or passages.
11. Worn or damaged needle or needle jet.
12. The enrichner valve not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Pw 80 runs awful
Pw80 over oiled rich no power exhaust carb fuel probl
YAMAHA PW80 Owner Service Manual
OEM parts for Yamaha
YAMAHA PW80 Owner Manual

Dec 01, 2012 | 2004 Yamaha PW 80

1 Answer

Right hand cylinder on my rd200 not firing properly, the bike will run, starts perfect, exhaust gets warm on right hand side but no power to ride, any ideas?. have put in new spark plugs, leads and caps,...


Assuming you properly cleaned the carburetor low speed circuit.check the list below.
1.Check the compression on the right hand cylinder.
2.check your points,pull the point cover off start the bike and watch the points if you see bright sparks at the contact point the condenser is is bad.
3.If your constantly getting an oil fouled plug the right hand crankshaft seal is leaking transmission oil into the crankcase.
4.check your fuel flow from that line to that carb.
Hope this helps you determine whats going.


Jun 04, 2010 | Yamaha RD 250 Motorcycles

1 Answer

Cleaned the carbs, changed the plugs gapped at 34


I would be checking for air leaks, this will give you a lean mixture. In particular look for the seals for the balance tubes and each carb.

May 04, 2010 | 1998 Suzuki VZ 800 Marauder

1 Answer

Husqvarna 51 died and wont restart


hi
if you have a good compression,a strong enough blue spark and carburetion for the fuel air mixture try priming the engine(put small amount of gas in the spark plug hole)then start the engine.If the engine runs only the gas you put inside the cilinder there is a carburetion problem to find and fix.
let me know regards savumihai71

Apr 13, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

Ryobi backpack leaf blower about three years hard to start


Basics to check:
1) Spark plug - brown or dark brown - OK
a) is it carbon or fuel fouled
b) is there spark

2) Muffler remove for inspection
a) exhaust screen clean or plugged
b) inspect cylinder wall/piston as the flywheel is slowly rotated
3) Check cylinder compression


Fuel starvation - 'lean fuel' condition
Basic things to check:
1) spark plug
2) spark arrestor in muffler
3) fuel lines and tank filter
4) turn adjustment needles out (counterclockwise) 1/4 to 1/2 turn
Chain Saws:
5) check impulse tube and intake boot for cracks or leaks
*if all of the above are OK and/or do not improve performance then:
Remove Carburetor
6) replace gaskets/diaphragms
a) use a spray carb cleaner to clean jets, holes, and body of carb
b) fuel pump diaphragm goes against the carb body,
then the gasket towards the outside
c) metering gasket goes against the carb body,
and the diaphragm goes towards the outside

Nov 24, 2009 | Ryobi Garden

1 Answer

Wont start


Hello;
If it starts with ether then you have spark, compression, and air. All you need is fuel. Make sure that you have fuel at the carbs and that the fuel is flowing to the cylinders. Check that the petcock is open and free of debris. Hope that helps;
Thanks;
Rich
RPM Northwest

May 19, 2009 | 1977 Suzuki GS 750

2 Answers

Fzr6 running lumpy


il try n help m8,, can i start by eliminating a few things,, have u made sure all 4 carb floats are the same height ,they need to be, ,and there is no holes in the diaphrams at the top of the carbs,,even a pin hole will give u grief,, ,,wot happens wen u pull the choke out wen motor is warm and idling,, if it evens out and pipes warm up then theres a blockage in 3 and 4 carb,and idel jets,or could have a split vacume pipe, or a air leak between the carb and cylinder,,if all fuel symtoms are ok ,, then make sure the coil wires are on properly, and good spark on the coolest cylinders, , try swapping over the coils to to see if the left cylinder becomes cooler than the right,,hope that gives an idea,,

Jan 09, 2009 | 1995 Yamaha FZR 600

Not finding what you are looking for?
2002 Triumph Trophy 1200 Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...