At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
TO ALL VN1500 OWNERS....This once happen to me, I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds.. Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars, When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.
It could be the switch for the kickstand. I am more familiar with Harleys, they have a switch on the clutch which is the same as the kickstand switch on other bikes
If your sitting on the bike...on the left hand side, under the floor board and behind the frame......its on the side of the motor take a rag and clean it off but its there
Have 2002 Vulcan 1600 Drifter. The tail and brake lights will not work. They were working rear turn signals do. It blew the fuse twice, now it is not blowing the fuse but still no lights. Got power to the fuse and leaving it not arriving at the rear light. The plug in,before it goes inside the rear fender, what color wires are what so I can check if things are arriving there O.K.?
×