Question about 2005 Hyosung GT 650

1 Answer

My bike only starts in neutral an will not stay started after i put in gear

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 118 Answers

There is most likely something wrong with the switch that tells your bike that the kickstand is up, unless your kick stand is really down at this time. So you may want to investigate your switch or the wiring to the switch.
This is a safety feature on most bikes to prevent running down the road with your kickstand down

Hope this helps

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a yamaha virago 250 1996 model. Ok, now. I take the stand off. The engine switch is in Run position. When I press the clutch and put my bike in gear , and try to start it, it does not start...why ?...


The clutch master/lever has a safety switch that tells the bike if the clutch lever is in (no power to rear) or out (power to rear). After almost 30 years this switch may have failed, making the bike think that the clutch is engaged regardless of lever position. If you have a multimeter you can test the switch yourself. Since the bike starts properly in neutral (also a safety feature) then the clutch lever switch is your most likely problem. Your bike might also have a side stand switch like mine. It functions much the same way, if the side stand is down and the bike put in gear it will kill the engine.

MGM

Oct 08, 2013 | Yamaha Xv 250 Virago S Motorcycles

1 Answer

The neutral lite wont stay on , the foot lever is not allowing it to go to neutral


The neutral light won't stay on because the gearbox isn't in neutral. try rocking the bike backwards and forwards, kick the gears down as many time as you can (at least 6) and then try moving the gear lever up one until the bike moves freely backwards and forwards. Your bike should then start. It would be easier to identify any problems if you let us know the make and model of the bike.

Feb 11, 2013 | Motorcycles

1 Answer

My motorcycle only start in neutral


That's put in as a safety feature so you can't start it in gear.

Oct 02, 2012 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

Hi, Bajaj Avenger: Self start does not work when the bike is not on neutral. It starts only when the gear is on neutral. The service centre could not fix the problem. What might have gone...


By your bike design your starter motor will work only when you proceed to neutral because your neutral gear has a switch closed when neutral and opens when you put on gear...dont collapse it...if you do any modification you will obtain wiring problem...

Aug 27, 2011 | 2006 Bajaj Bajaj Avenger

1 Answer

Xlr 125 wont start do i have to pull the clutch in to start it


You need to put it into neutral in order to start it or pull the clutch and hold it down until started. I would suggest putting it into neutral. Double check that you have it in neutral by trying to push the bike without holding down the clutch when you think you have it in neutral. If the bike rolls easily, then you know its in neutral. If it won't push or seems hard to get it to roll forward then you know its still in gear. Once you have it in neutral (for sure), hold the clutch down and start the bike.

Othen than that, all you have to do is make sure its turned on and it should start. Some bikes use a key to turn it on, others have a throttle control switch. We had Suzuki Quad racers which were 2 stroke - and are a little different.

Jul 06, 2011 | 1997 Honda XLR 125 R

1 Answer

Engine dies as soon as I put it into gear.


check that the side stand switch works with a multi meter. make sure you havent pulled a wiring plug apart when working in the carbs

May 19, 2010 | 1982 Honda VF 750 S

2 Answers

Neutral light stays on when bike is in gear


i dont understand, the bike shouldent start in gear with the lever out it would jump forward when you hit the start button.. there is nothing wrong with the bike by what you say its just a neutral light, witch is a switch find the neutral indicator switch and replace it and your probelms will go away or test the one you have it should test 13ohms in neutral and OL in gear
let me know how you make out

May 16, 2010 | 1997 Honda CBR 900 RR Fireblade

1 Answer

Have to hold clutch to keep bike from dieing


clutch plate adjusment or cable adjustment, it sounds like the clutch is staying engaged, try loosening the cable on the clutch until there is lots of slack init and try to start the bike, if it jerks forward then you are going to have to adjust/replace the internal clutch plates hope this helps

dan

Mar 11, 2010 | 2004 Triumph Daytona 600

Not finding what you are looking for?
2005 Hyosung GT 650 Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...