Question about Suzuki DR 650 SE Motorcycles

1 Answer

Battery fine cranks well, fuses fine, Still no start, ran great then nothing.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

Chreck your HT and see if you have a spark at the plug .
your HT may be faulty or you may have a loose connection somewhere .
CDI unit could be burned too .

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Silverado will not start


https://s7.postimg.org/43v831vcr/silverado_starter.jpg

Click on the link.
I tried to get everything on one page, makes it a little small to read. Check for voltage and ground at the starter motor. Any testing make sure tranny is in park or neutral and parking brake is set. Two voltage circuits, one comes from the battery, hot all the time. The other voltage circuit goes hot with key in the crank position and the starter relay energized, goes to starter S terminal. The neutral or clutch switch is also involved in that circuit. Use a test light to check for voltage. The starter motor is grounded through engine block. Make sure battery has a full charge. When you check fuses, also, use a test light and check voltage on fuse circuit, applicable fuses.

Jul 04, 2017 | 2003 Chevrolet Silverado 2500

1 Answer

98 grand prix won't start battery good tried jump start nothing removed glove box relay clicking ? checked fuses under hood in fuss box all good will not turn over clicking noise from relay...


Better check with a test light for power to the small wire that goes to the starter from the key switch. If no power need to check for a neutral safety switch or fuse. Or the starter you got is bad. Alternator will not cause not to crank over

Aug 03, 2013 | 1998 Pontiac Grand Prix

1 Answer

P1320 code appeared and we replaced the cam position sensor. It ran OK, but started rough until warm and next code showed #1 cylinder misfire. Replaced #1 coil and it ran great. Then later the engine light...


i just had the same problem in my bmw 325i. Probably vaccum leak or exhaust leak. Check that nothing came loose in these areas. It takes time for your car to learn the new CPS (cam pos. sensor) so give it a few days and reset the code again and see if it works.

Mar 12, 2010 | 2000 Nissan Maxima

1 Answer

1991 Camry, ran battery down, won't start with jump.


Check all fuses under dash and hood. Install a good battery or jump it. Have someone try to crank it while you check for voltage to the starter solenoid. Make sure all battery connection including ground to body are clean and tight. If good, make sure there is 12volts at the stater. If good, it sounds like a new sarter. Please let me know. Is this standard or automatic?

Jun 08, 2009 | 1991 Toyota Camry

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...